OzSTOC
Honda ST1100 Section => Where to Purchase Parts & items for the Honda ST1100 => Topic started by: alans1100 on September 02, 2014, 12:07:43 AM
-
I've just had PM asking about the 3 O rings for the final drive/rear wheel and to assist others who might also be after they part numbers I have put them here.
Drive Flange/Spider O-RING, 61X2 91302-MA6-003
For Wheel Hub/Bearing O-RING, 50.5X3.5 (NOK) 91358-MG9-003 (corrected this one)
Final Drive Spline (the one you can't see) O-RING, 39.5X2.4 (ARAI) 91356-MG9-003 and 91356-MG9-004 (NOK) (added second number)
I source my part numbers from here http://www.st-1100.com/st1100-parts.html (http://www.st-1100.com/st1100-parts.html) which is a site maintained by a Pan European ST1100 owner.
-
Has anyone found a good reliable Aussie supplier?
I just received this quote from David Silver Spares in the UK, but it seems there is a mismatch in the part numbers they have quoted. So these may not be the correct items after all. I will have to get confirmation as I trust Alans part number to be the accurate call out.
91356-MG9-003, in stock @ 2.60 GBP
91304-KT8-003, in stock @ 1.95 GBP
91358-MG9-003, in stock @ 2.55 GBP
Postage on the above = 8.00 GBP
I also have emailed Carolina Bike & Trike but they don't even answer emails let alone want to supply overseas. http://www.carolinabikeandtrike.com/ORings.htm (http://www.carolinabikeandtrike.com/ORings.htm)
-
PM your details and I will put a set in the mail for you free of charge, I get them for nothing
-
Has anyone found a good reliable Aussie supplier?
I just received this quote from David Silver Spares in the UK, but it seems there is a mismatch in the part numbers they have quoted. So these may not be the correct items after all. I will have to get confirmation as I trust Alans part number to be the accurate call out.
91356-MG9-003, in stock @ 2.60 GBP
91304-KT8-003, in stock @ 1.95 GBP
91358-MG9-003, in stock @ 2.55 GBP
Postage on the above = 8.00 GBP
I also have emailed Carolina Bike & Trike but they don't even answer emails let alone want to supply overseas. [url]http://www.carolinabikeandtrike.com/ORings.htm[/url] ([url]http://www.carolinabikeandtrike.com/ORings.htm[/url])
This is off a CB400 91304-KT8-003, in stock @ 1.95 GBP http://www.partzilla.com/search/?q=91304-KT8-003&x=12&y=7 (http://www.partzilla.com/search/?q=91304-KT8-003&x=12&y=7)
------------------------
The top one is correct but from a different supplier so same part but different number. 91356-MG9-003
Item 37 from here
http://www.partzilla.com/parts/search/Honda/Motorcycle/1999/ST1100A%20A/FINAL%20DRIVEN%20GEAR%20%282%29/parts.html (http://www.partzilla.com/parts/search/Honda/Motorcycle/1999/ST1100A%20A/FINAL%20DRIVEN%20GEAR%20%282%29/parts.html)
-------------------------------------
This one is correct as well 91358-MG9-003
Items 22 and 23 from Partzilla http://www.partzilla.com/parts/search/Honda/Motorcycle/1999/ST1100A+A/REAR+WHEEL+%282%29/parts.html (http://www.partzilla.com/parts/search/Honda/Motorcycle/1999/ST1100A+A/REAR+WHEEL+%282%29/parts.html)
-
I think These should fit and last several tyre changes.
http://www.ebay.com.au/itm/331238013646?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 (http://www.ebay.com.au/itm/331238013646?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649)
-
Shop around to suppliers of mining and/or hydraulic gear, my son-in-law works for one and if given the sizes an be matched quite easily, he gets nitrol for me, should never need replacing.