Author Topic: Rear shock preload  (Read 5716 times)

Offline twisted 1

  • Jr. Member
  • **
  • Posts: 53
  • Thanked: 5 times
  • ST Legend
Rear shock preload
« on: December 16, 2012, 06:49:27 PM »
Hi Guys I must be going loopy, I'm sure that I remember reading on this wonderful and extremely helpful site an article on topping up or refilling the oil in the rear shock preload adjuster. I've looked everywhere and can't seem to be able to find it, can some one please point me in the right direction.
Life's Too Straight Without The Twistys
 

Offline twisted 1

  • Jr. Member
  • **
  • Posts: 53
  • Thanked: 5 times
  • ST Legend
Re: Rear shock preload
« Reply #1 on: December 16, 2012, 09:18:09 PM »
Ok guys, no need to rack your brains over this one i found my answer on the Yankie site, if you are interested here is the link  :runyay                                                                                                                                                                           http://www.st-owners.com/forums/showthread.php?106715-ST1300-Pre-load-Fluid-Replacement
Life's Too Straight Without The Twistys
 

Offline twisted 1

  • Jr. Member
  • **
  • Posts: 53
  • Thanked: 5 times
  • ST Legend
Re: Rear shock preload
« Reply #2 on: December 17, 2012, 08:00:03 PM »
 :thumbs Well did this this arvo when I got home from work, before I did this procedure I had no resistance on the preload knob at all but after finishing its bloody great, after about 1 turn now there is now resistance and what a difference to the rear suspension. :runyay :runyay :runyay :runyay :runyay
Life's Too Straight Without The Twistys
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Rear shock preload
« Reply #3 on: December 18, 2012, 08:58:30 AM »
Thanks for sharing Twisted1 - she must feel like a new bike right about now!

Cheers, Diesel
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Offline Gatey

  • Sr. Member
  • ****
  • Posts: 273
  • Thanked: 23 times
  • ST Legend
Re: Rear shock preload
« Reply #4 on: July 15, 2015, 06:22:50 PM »
Just done this job. Took less than twenty minutes. I cracked the banjo before undoing the two M6 bolts.

Unclip the hose from its retaining clips and worked from the left side of the bike only. Once the hose is loose you can raise it high enough to prevent air from getting in and just hook it up with a short wire.

Used 5Wt fork oil. The difference is noticeable the moment you drop it off the stand.

Set the STD. Now to set the rest up properly.
Persevere...My Dad did.
FarRider #269..IBA#54983
One of the Barraba Crew
 

Offline spanner

  • Blue is better .... apparently
  • NatRally 2018 - Mackay
  • Legendary "1000 Club" Member
  • *
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Rear shock preload
« Reply #5 on: July 16, 2015, 08:37:39 AM »
I wonder if this is why my bike feels so close to the ground.

I have to have 100% level ground for my side stand to work with out tipping over ..... or a slope to the side the side stand is on.

This might also help with steering as well??
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline Gatey

  • Sr. Member
  • ****
  • Posts: 273
  • Thanked: 23 times
  • ST Legend
Re: Rear shock preload
« Reply #6 on: July 16, 2015, 09:51:07 AM »
Post a pic Spanner.

Goes without saying if your rear end is sitting much too low then your rake angle has been altered as a result. If the rake angle is being compromised then everything about the bikes handling will be different and not always apparent.

For the rear end to be so low as to affect the side stand more needs to be investigated. Starting with the side stand itself.


The most obvious thing with the pre load recharge was stance and no slumping once I got on.
I've just finished putting all the other shock adjustments back to STD. Over the weekend If Im feeling well enough I'll ride it and set the show up for me.
Seems the last owner tried to amend the preload issue by cranking it on as far as it felt ok then hardened up the damping.
Persevere...My Dad did.
FarRider #269..IBA#54983
One of the Barraba Crew
 
The following users thanked this post: spanner

Offline spanner

  • Blue is better .... apparently
  • NatRally 2018 - Mackay
  • Legendary "1000 Club" Member
  • *
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Rear shock preload
« Reply #7 on: July 16, 2015, 11:51:46 AM »
will try and get some pics and measurements.

Cheers,

Spanner
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Rear shock preload
« Reply #8 on: July 16, 2015, 05:22:56 PM »
Its entirely possible that teh previous owner may have replaced the shock with a slightly shorter version, maybe even to lower the seat height. Or the shock has collapsed. even.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline spanner

  • Blue is better .... apparently
  • NatRally 2018 - Mackay
  • Legendary "1000 Club" Member
  • *
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Rear shock preload
« Reply #9 on: July 16, 2015, 07:12:33 PM »
Just took it into get a safety cert today.

Definitly no issue with the shock being bad.

do you remember Blue Honda?  Thos is his old 1100.

Was he ..... erm..... shorter in the leg than most?
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Rear shock preload
« Reply #10 on: May 10, 2016, 09:09:05 AM »
Hey Spanner - a lower profile rear tyre will give the same problem too.
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Rear shock preload
« Reply #11 on: July 28, 2019, 02:12:31 PM »
Found this video on how to do the Pre-load Fluid Replacement...  :thumbs

https://www.youtube.com/watch?v=12s2NGKYRoY

Must do mine one day...  :think1


        2005 Honda ST1300A
 

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Rear shock preload
« Reply #12 on: July 29, 2019, 10:22:10 AM »
Found this video on how to do the Pre-load Fluid Replacement...  :thumbs

https://www.youtube.com/watch?v=12s2NGKYRoY

Must do mine one day...  :think1


Awesome find mate :thumbsup
I'll copy this post to the Re-oil the Rear Shock on a ST1300 topic in the section "How To..." Instructions and Pics for Regular Maintenance Jobs specific to the ST1300...   http://ozstoc.com/index.php?topic=11518.0

Cheers
Shiney
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Rear shock preload
« Reply #13 on: July 29, 2019, 01:59:04 PM »
Thanks Shiney, I did wonder if I'd put it in the most appropriate thread... :thumb


        2005 Honda ST1300A