Author Topic: Contour...  (Read 10226 times)

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Contour...
« Reply #25 on: February 15, 2013, 10:33:21 AM »
Here is the wickedest cam mount ever!!!!!


https://www.youtube.com/watch?v=N3JJBj1Y4tQ






Cheers, Diesel
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Contour...
« Reply #26 on: February 15, 2013, 12:32:11 PM »
Its making me ill watching it.....
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Contour...
« Reply #27 on: February 15, 2013, 02:15:13 PM »
It's on a 1.4 metre stick.  But where's the stick, and where does it attach?

If you buy one, Diesel, for goodness sake try to stop it swinging all over the bike.  I'm with Brock on this.  After 20 seconds I got the idea, and didn't need 7 minutes!
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Contour...
« Reply #28 on: February 15, 2013, 10:47:13 PM »
I watched the whole thing thinking it would be revealed and i got nudda  :||||

Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Contour...
« Reply #29 on: February 15, 2013, 10:57:29 PM »
here ya go ... spoilsports     :grin


http://www.hurtlegear.com.au/products/GO360-Camera-Mount.html




Cheers, Diesel
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Offline Tackleberry

  • Sr. Member
  • ****
  • Posts: 367
  • Thanked: 4 times
  • QUEENSLANDER!!!!!!!
Re: Contour...
« Reply #30 on: March 08, 2013, 12:52:42 PM »
Diesel's link has now gone bye-byes. 

Did anybody notice the duct tape on the top of his helmet?  What an annoying device having that thing swing around your head, pulling on your neck when it swings suddenly half way through a corner. 

And I am with you also Brock. 
Steve
Only the guy in the glass matters..... 
Ride on Davo it's your road now.
 

Offline Tipsy

  • Landed Gentry
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1342
  • Thanked: 48 times
  • Laurie
Re: Contour...
« Reply #31 on: March 08, 2013, 10:51:52 PM »
I am lost and haves gone to find myself
Now If I get back before I return
Please ask me to wait.
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Contour...
« Reply #32 on: March 28, 2013, 11:23:22 AM »
For the record......


Over the 6,859kms I travelled to the National Rally and back...     


I took 220Mb of pics  (will tell you the qty soon), and 19.3Gb of 720p HD footage on the Contour Roam - so it will be a fair bit of sorting before I can lay them out in films and ride reports.


I have a 32Gb Micro SD card in the Contour - and trust me, I got a LOT of footage, and I had a 16GB Micr SD Card in the digi cam - so plenty of space left there too.     :thumbsup


Cheers, Diesel
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5596
  • Thanked: 1312 times
  • Guyra - NSW
Re: Contour...
« Reply #33 on: April 02, 2013, 02:53:57 PM »
Have been using the Helmet mount on the Contour with success, but had some RAM bits in the shed from other projects.....so mounted near the (L) mirror with a S/Steel backing plate to support the ST1300 tupperware with S/S hardware, used the shortest RAM arm so not to exacerbate any vibration.

Seams a winner.....testing will tell, can turn camera to capture forward, rear or rider....easy to reach with the left hand.

Cheers
« Last Edit: April 02, 2013, 02:57:53 PM by ST2UP »
Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Contour...
« Reply #34 on: April 02, 2013, 07:20:26 PM »
So the ram ball can screw into the contour ?
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline ST2UP

  • The Pockey Poker ;)
  • Administrator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 5596
  • Thanked: 1312 times
  • Guyra - NSW
Re: Contour...
« Reply #35 on: April 02, 2013, 09:12:50 PM »
Yep, RAM make a ball with the ? 3/8 thread for The std camera base thread fitted under the Contour and most other cameras.....

Cheers
Chris    



IBA #64116   FarRider #660   Ulysses #56339

st2up@ozstoc.com

Mbl: 0428792425

Sighted it....Wanted it...Chucked a fit...GOT IT !!!!
 

Offline Malcolm6112

  • Legendary Member
  • *****
  • Posts: 933
  • Thanked: 3 times
  • Armadale WA
Re: Contour...
« Reply #36 on: April 02, 2013, 10:11:31 PM »
Have been using the Helmet mount on the Contour with success, but had some RAM bits in the shed from other projects.....so mounted near the (L) mirror with a S/Steel backing plate to support the ST1300 tupperware with S/S hardware, used the shortest RAM arm so not to exacerbate any vibration.

Seams a winner.....testing will tell, can turn camera to capture forward, rear or rider....easy to reach with the left hand.

Cheers

I was wondering about fitting with a Ram mount. This would be more secure and easy to remove for storage.

Thanks

 :blu13
Malcolm
2004  ST1300A

Farrider 518
IBA       58213
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Contour...
« Reply #37 on: April 02, 2013, 10:25:09 PM »
OK we will get two !
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline bloodbikes

  • Legendary Member
  • *****
  • Posts: 817
  • Thanked: 32 times
Re: Contour...
« Reply #38 on: September 02, 2013, 05:49:40 PM »
Just bought a sena smh10 and was wondering if its possible to connect to contour + model cam via bluetooth to use the microphone function?
Is this possible?

 :wht11