Author Topic: Removing ABS/TCS From a 1995 ST1100  (Read 2275 times)

Offline Garry_Coates

  • Full Member
  • ***
  • Posts: 139
  • Thanked: 24 times
  • ST1100 ABS/TCS (95), XR600R (99) and TXC310R (13)
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #25 on: November 20, 2022, 09:06:16 AM »
The VIN identifies which Honda ST1100 model has ABS by using the production sequence number. Those starting with 55 are ST1100 ABS versions.

Refer: https://www.hondashop.com.au/wp-content/uploads/2015/08/Honda-Motorcycle-Model-ID-Chart.pdf

For 1995:
ST1100AS SC26U*SM550001~
ST1100PS SC26U*SM580001~
ST1100S   SC26U*SM500001~

This is a great chart for future reference.

Regards
         Garry
 
The following users thanked this post: ruSTynutz

Offline DaleAP

  • Full Member
  • ***
  • Posts: 119
  • Thanked: 84 times
  • Narangba, Queensland
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #26 on: November 20, 2022, 03:09:16 PM »
The problem with the ABS1 abs components is they have all been taken to fix other bikes. I have permanent ebay searches for ABS1 abs components that no longer find anything.

I've been keeping my eyes open for a rear sensor for my 1995 1100. I'd have better luck finding a Tasmanian Tiger!
Dale Porter
1995 ST1100 ABS/TCS  :bl11

Past bikes: GPX-250 -> CBR-600F2 -> CBR-954RR -> VTR-1000
OzStoc: #?  Ulysses: #71199
 

Offline Garry_Coates

  • Full Member
  • ***
  • Posts: 139
  • Thanked: 24 times
  • ST1100 ABS/TCS (95), XR600R (99) and TXC310R (13)
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #27 on: November 20, 2022, 04:09:00 PM »
Hi DaleAP,
          the rear sensor is common to ABS2 models as well. You can still buy them, refer: https://www.cmsnl.com/honda-st1100a-1995-s-australia_model4639/sensor-wheel-spd_38510maj781/

But at $500 delivered you would have to be certain the rest of the ABS system is good as a new modulator/ ecu is worth the value of the bike.

Good luck.

Regards
          Garry
« Last Edit: November 20, 2022, 04:54:29 PM by Garry_Coates »
 
The following users thanked this post: DaleAP

Offline DaleAP

  • Full Member
  • ***
  • Posts: 119
  • Thanked: 84 times
  • Narangba, Queensland
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #28 on: November 20, 2022, 06:57:05 PM »
Thanks for the link. Yeah, they're pricey. :eek

Well I know the sensor needs replacing as it has had a deep groove cut in the the end by the ring gear. Once that's sorted I'll know if there are any other issues.
Dale Porter
1995 ST1100 ABS/TCS  :bl11

Past bikes: GPX-250 -> CBR-600F2 -> CBR-954RR -> VTR-1000
OzStoc: #?  Ulysses: #71199
 

Offline Garry_Coates

  • Full Member
  • ***
  • Posts: 139
  • Thanked: 24 times
  • ST1100 ABS/TCS (95), XR600R (99) and TXC310R (13)
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #29 on: November 20, 2022, 07:27:16 PM »
Hi DaleAP,
            my rear sensor also has a wear groove. The wear is apparently normal talking to a honda mechanic. If it works, clean it, check the airgap and leave it would be my suggestion. It not working after that is a different story.

Regards
          Garry
« Last Edit: November 21, 2022, 02:57:27 PM by Garry_Coates »
 

Offline Garry_Coates

  • Full Member
  • ***
  • Posts: 139
  • Thanked: 24 times
  • ST1100 ABS/TCS (95), XR600R (99) and TXC310R (13)
Re: Removing ABS/TCS From a 1995 ST1100
« Reply #30 on: November 25, 2022, 06:31:52 PM »
« Last Edit: November 25, 2022, 06:43:56 PM by Garry_Coates »