Tupperware Removal Worksheet

[Shiney]

I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here

I recommend using the cheat sheets from St-Owners.com


      


When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet



As for the actual removal of the fairings, the instruction can be found attached (look at the bottom of this post)



Cheers
Shiney

[StinkyPete]

These are a good resource Shiney, and I have laminated set in the shed.  Thanks for the head's up for some of our newer members.   

[Gnomad42]

I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here

I recommend using the cheat sheets from St-Owners.com







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney

That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.

Sent from my SM-N910G using Tapatalk

[Gnomad42]

I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here

I recommend using the cheat sheets from St-Owners.com







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney

That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.

Sent from my SM-N910G using Tapatalk

Now to hunt one down for the 1100

Sent from my SM-N910G using Tapatalk

[Wild Rose]

Thanks very much Shiney   
Now just got to get game enough to pull it apart or find someone close who can help me put it back together
I will have to print out a copy for Toowoomba Honda as last time they dod a shocking job
 

[MICK]

I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here

I recommend using the cheat sheets from St-Owners.com







When you remove the fasteners, you place them on the correct spot on the worksheet.  This helps keep track of all the parts.  Also, each fastener is numbered so you can see the location where it came from - and where to put it back.

Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size.  Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.

This is what the sheets look like loaded up:




Here are the links to the full page pdf files:


Page 1 (with numbers)

Page 2 (with numbers)

Page 3 (with numbers)



This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet

Cheers
Shiney

Thank you very much. Cheers Mick

Sent from my SM-T550 using Tapatalk

[DBfive]

Thanks Shiney, much more sophisticated than my numbered egg carton!

[richo]

I have been using the sheet for a while but I have added a small fishing tackle tray to hold the individual bits and pieces .    I always move the sheet of knock it over and the parts move quicker than kids on icecream. 

[Shiney]

I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts
(But not so good for the plastic pins )

[Shiney]

For the actual removal of the fairings, the instruction can be found here: http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html

Start with Remove the Inner Lower Cowl


Cheers
Shiney

[Dragonstaff]

Thanks for these. Printed and laminated.

[West Aussie Glen]

For the actual removal of the fairings, the instruction can be found here: http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html

Start with Remove the Inner Lower Cowl


Cheers
Shiney

Hi, Shiney, did you save the above ? I can't open them. A PDF would be great.

[Brock]

Looks like the original site is gone.

[Dragonstaff]

There are seven PDFs at the bottom of the top post that still download, if that is what you are looking for.

Illustrated how-to's for removing the fairing.

[West Aussie Glen]

Thanks Dragonstaff

[Shiney]

Spot on Dragonstaff

Turn's out it was a good thing they were downloaded and attached since the website shut down


The link to the outdated website has been removed from the original post and the attached files have been pointed out


Cheers
Shiney

[Dragonstaff]

There are seven PDFs at the bottom of the top post that still download, if that is what you are looking for.

Illustrated how-to's for removing the fairing.

And I have used them this afternoon, doing an oil change and getting to know the bike.

[Biggles]

I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts
(But not so good for the plastic pins )

I glued my laminated sheets to 3 ply and drilled the appropriate sized holes, so even the plastic pins are now held in place.

[Shiney]

I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts
(But not so good for the plastic pins )

I glued my laminated sheets to 3 ply and drilled the appropriate sized holes, so even the plastic pins are now held in place.

That's a really good idea I'll have to give that a go myself

Thanks Biggles

[Brookester]

Does anyone have these PDF's available including the missing images?

[StinkyPete]

Does anyone have these PDF's available including the missing images?

I do.    PM me your e.mail address and I'll send them to you.   

[Brookester]

Many thanks to Pete I now have them 

[Langers]

Any chance of getting the PDF's up on this site?

[West Aussie Glen]

Hope these are complete

[Langers]

Thanks Glen, I had the 3 PDF's but not the Wordoc. I'm sure having the PDF's on the forum will help a lot of the new ST owners - they've certainly helped me put Scarlett back together.