OzSTOC

Honda ST1300 Section => "How To..." Instructions and Pics for Regular Maintenance Jobs specific to the ST1300... => Topic started by: Draco (Heartbreak Kid) on March 25, 2016, 10:25:53 PM

Title: Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs
Post by: Draco (Heartbreak Kid) on March 25, 2016, 10:25:53 PM

Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs

First by choice and advice from my Mentor (shiney) Remove the Tupperware both sides

(https://image.ibb.co/kZSgFw/20160325_125104_zpsn7dtua9m.jpg)

NOW its lots easier to get to the little rubber grommet type push in plug.

(https://image.ibb.co/dGF1Fw/f44859ea_4971_457d_98f0_b9a5d9ddba63_zpsabo35i1j.jpg)

Now wriggle it out as it's only rubber and will come out easily.

Remove old bulb (globe) insert new L.E.D. bulb (globe)

(https://image.ibb.co/f3VCNb/20160325_115136_zpsesvlvzqo.jpg)

TEST IT before you put it back in its hole to save redoing it if it is the wrong way around.

REPEAT FOR OTHER SIDE AND YOUR DONE

(https://image.ibb.co/fGrxoG/20160325_115334_zpsbsgqsuia.jpg)   (https://image.ibb.co/iCmV8G/20160325_115436_zpsfh19acgn.jpg)   (https://image.ibb.co/nkfe2b/20160325_123327_zpswvfnfz1e.jpg)

 :thumbs :hatwave :grin :blu13left

Title: Re: 2 X T10 LED 9 SMD 5050 LED PARKER / WEDGE Tail Side LIGHT LAMP BULBS
Post by: Shiney on March 25, 2016, 10:54:47 PM

Awesome work mate :thumbsup
Thanks for putting up the guide to make it easier for others to change their parking lights / positioning lights :hatwave

Cheers
Shiney

Title: Re: 2 X T10 LED 9 SMD 5050 LED PARKER / WEDGE Tail Side LIGHT LAMP BULBS
Post by: gaz on March 26, 2016, 12:33:09 AM

Awesome ... Great to hear .. :thumbsup

Title: Re: 2 X T10 LED 9 SMD 5050 LED PARKER / WEDGE Tail Side LIGHT LAMP BULBS
Post by: tj189 on March 26, 2016, 06:47:22 AM

Well dne and thanks for sharing  ++

Title: Re: Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs
Post by: Shiney on November 01, 2017, 08:40:49 PM

THE PICTURES HAVE BEEN UPDATED    ++

Title: Re: Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs
Post by: Biggles on November 10, 2019, 08:08:35 PM

After putting in the new Narva 150s, blow me down, the RH position light was blown.  I've never done the job before and it's supposed to be a doddle pulling out the fitting from underneath with the centre panels removed.
I have the centre panels out for cooling (and I believe it works).  I could get the LH one out but there was no way I could get my hand in front of the Stebel airhorn to get the RH one.  So the cowl had to come off, with the attendant hassle to having to remove the spot light.  Dang, having farkles complicates things!
So the new LED position lights are in.  I got the 10 element ones and they look pretty neat.  No pix- see them in Port Sorell soon.  :grin

Title: Re: Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs
Post by: alans1100 on November 10, 2019, 09:21:29 PM

I have some of these waiting to go in - should have bought a few more because the car uses them as well.
 
https://www.ebay.com.au/itm/392149641381? (https://www.ebay.com.au/itm/392149641381?)

Title: Re: Replace Positioning / Parker Light Bulbs With 2 X T10 LED Bulbs
Post by: Biggles on November 11, 2019, 01:03:20 PM

Quote from: alans1100 on November 10, 2019, 09:21:29 PM

I have some of these waiting to go in - should have bought a few more because the car uses them as well.
 
https://www.ebay.com.au/itm/392149641381? (https://www.ebay.com.au/itm/392149641381?)

With that many elements they should be very bright!