Farkles, Gear & Accessories > What have you done in the shed today
Been a while
Gadget:
This afternoon I realised with all the wet weather, and having caught Covid testing positive on Anzac Day, I hadn't taken Aragog for a spin for quite a while.
I checked to see if she would start, and though the lights came on, there wasn't enough charge to start her.
So out comes the battery charger, double adapter from the garage door opener GPO on the ceiling, and extension lead down to Aragog to recharge the battery.
I really do need to set up an Anderson Lead connectors to make it easier.
Sent from my SM-N986B using Tapatalk
Brock:
Jaycar has these 15A connectors, they are perfect to crimp or solder onto a cable for battery chargers..
https://www.jaycar.com.au/15a-anderson-powerpole-connectors-red-and-black-pair/p/PT4402
Williamson:
Just replaced my battery trickle charger, got one from the Repco catalogue, it came with an assortment of leads and connectors which can be swapped around using this type of connector.
This one sits tucked under the pillion saddle for easy access to connect to the charger at the end of a ride.
ruSTynutz:
I use a CTEK Lithium XS Battery Charger which, as the name implies, is for a lithium battery which I fitted some time back.
It comes with one lead with alligator clips and another lead with the standard (female) Ctek plug.
This is what I located next to the back shock adjuster for easy access without having to remove side covers or seat.
I did have to extend the lead though as it wasn't quite long enough to reach that location.
https://frankiesautoelectrics.com.au/ctek-lithium-xs-12v-5-0a-lifepo4-battery-charger/
There are numerous model Ctek chargers available (with the same leads) if you're still running a lead acid battery...
I also have one of these from before I swapped over to a lithium battery which I use on my second ST and car, when needed...
Wild Rose:
I have used the CTEC MX5 on my ST :blk13 and still use it on the Spyder :Spyder
Navigation
[0] Message Index
[#] Next page
Go to full version