Hi way pegs

[jaybee]

Hi all, I am looking to fit some hiway pegs where the side bumpers are. Any ideas would be appreciated.
Thanks in advance,
JB

[ST2UP]

Have a read of this mate.......

http://ozstoc.com/index.php?topic=2198.0



Also checkout Motorcycle Larry in the US

[jaybee]

Thanks Chris will check it out

[StinkyPete]

Hi all, I am looking to fit some hiway pegs where the side bumpers are. Any ideas would be appreciated.
Thanks in advance,
JB

Hi JB and welcome to the forum.   Lots of our members are using Highway Blades and say that they are one of the best additions they have made to their bikes.   The Motorcycle Larry Highway Blade kits are very popular, but at $280 USD plus shipping, I will continue to get by without a set.  I am not sure if Tipsy is making kits for the ST1300 yet.

[Marcus]

I got mine at Motorcycle Larry... perfect for ST1300

[Biggles]

As stated, a must have for long distance riding.  Also beneficial on the ST13s in summer when you need to get your legs away from the furnace that many of us (but not all) experience.

[jaybee]

Have a read of this mate.......

http://ozstoc.com/index.php?topic=2198.0



Also checkout Motorcycle Larry in the US

Ok guys, RE: Hiway pegs. I made my own. A metal pergola post base, cut off top and bottom leaving a 180mm x 32mm tube, cut it in half. 2x 120mm long coach bolts, 4x washers 2x nuts. fit bolts with washer top and bottom finger tight nut and tac weld both washers, this centralises everything. 2x flat steel 50x50mm, drill hole for bolt and weld to front of crash bars. I used a spare hiway peg of my Thunderbird, but Kuryakin have lots of reasonably priced pegs. The peg is easily removed for access to the engine.

[ST2UP]

 Good job....satisfying to undertake and complete your own project