OzSTOC
Honda ST1300 Section => "How To..." Instructions and Pics for Regular Maintenance Jobs specific to the ST1300... => Topic started by: Shiney on January 26, 2018, 02:47:57 PM
-
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin
I recommend using the cheat sheets from St-Owners.com :thumbsup
(https://i.ibb.co/D13GNrB/Tupper-Ware-Worksheet-page-1-with-numbers.jpg) (https://i.ibb.co/F6Gpnr5/Tupper-Ware-Worksheet-page-2-with-numbers.jpg) (https://i.ibb.co/TmVw5Kr/Tupper-Ware-Worksheet-page-3-with-numbers.jpg)
When you remove the fasteners, you place them on the correct spot on the worksheet. This helps keep track of all the parts. Also, each fastener is numbered so you can see the location where it came from - and where to put it back.
Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size. Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.
This was first mentioned on OzSTOC here: http://ozstoc.com/index.php?topic=13.0 (http://ozstoc.com/index.php?topic=13.0)
If you would like to see the original on ST-Owners follow this link: http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet (http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet)
As for the actual removal of the fairings, the instruction can be found attached (look at the bottom of this post) :thumbsup
Cheers
Shiney
-
These are a good resource Shiney, and I have laminated set in the shed. Thanks for the head's up for some of our newer members. :thumb
-
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin
I recommend using the cheat sheets from St-Owners.com :thumbsup
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%201.jpg[/url])
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%203.jpg[/url])
When you remove the fasteners, you place them on the correct spot on the worksheet. This helps keep track of all the parts. Also, each fastener is numbered so you can see the location where it came from - and where to put it back.
Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size. Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.
This is what the sheets look like loaded up:
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%202.jpg[/url])
Here are the links to the full page pdf files:
Page 1 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%201%20with%20numbers.pdf[/url])
Page 2 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%202%20with%20numbers.pdf[/url])
Page 3 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%203%20with%20numbers.pdf[/url])
This was first mentioned on OzSTOC here: [url]http://ozstoc.com/index.php?topic=13.0[/url] ([url]http://ozstoc.com/index.php?topic=13.0[/url])
If you would like to see the original on ST-Owners follow this link: [url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url] ([url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url])
Cheers
Shiney
That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.
Sent from my SM-N910G using Tapatalk
-
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin
I recommend using the cheat sheets from St-Owners.com :thumbsup
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%201.jpg[/url])
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%203.jpg[/url])
When you remove the fasteners, you place them on the correct spot on the worksheet. This helps keep track of all the parts. Also, each fastener is numbered so you can see the location where it came from - and where to put it back.
Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size. Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.
This is what the sheets look like loaded up:
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%202.jpg[/url])
Here are the links to the full page pdf files:
Page 1 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%201%20with%20numbers.pdf[/url])
Page 2 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%202%20with%20numbers.pdf[/url])
Page 3 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%203%20with%20numbers.pdf[/url])
This was first mentioned on OzSTOC here: [url]http://ozstoc.com/index.php?topic=13.0[/url] ([url]http://ozstoc.com/index.php?topic=13.0[/url])
If you would like to see the original on ST-Owners follow this link: [url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url] ([url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url])
Cheers
Shiney
That's just so good, Shiney! Now to source a new set of fasteners and redo the set!
Thanks.
Sent from my SM-N910G using Tapatalk
Now to hunt one down for the 1100
Sent from my SM-N910G using Tapatalk
-
Thanks very much Shiney :like
Now just got to get game enough to pull it apart or find someone close who can help me put it back together
I will have to print out a copy for Toowoomba Honda as last time they dod a shocking job
:beer
-
I just noticed that there have been some questions as to Fairing Removal / Cowl Removal / Tupperware Removal from the ST so I thought I'd post this here :grin
I recommend using the cheat sheets from St-Owners.com :thumbsup
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%201.jpg[/url])
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%203.jpg[/url])
When you remove the fasteners, you place them on the correct spot on the worksheet. This helps keep track of all the parts. Also, each fastener is numbered so you can see the location where it came from - and where to put it back.
Some of the socket bolts are labeled as 5mm or 6mm - this is the thread size. Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.
This is what the sheets look like loaded up:
([url]http://www.my427sc.com/_MISC/_ST/Tupperware%20Worksheet%202.jpg[/url])
Here are the links to the full page pdf files:
Page 1 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%201%20with%20numbers.pdf[/url])
Page 2 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%202%20with%20numbers.pdf[/url])
Page 3 (with numbers) ([url]http://www.my427sc.com/_MISC/_ST/TupperWare%20Worksheet%20page%203%20with%20numbers.pdf[/url])
This was first mentioned on OzSTOC here: [url]http://ozstoc.com/index.php?topic=13.0[/url] ([url]http://ozstoc.com/index.php?topic=13.0[/url])
If you would like to see the original on ST-Owners follow this link: [url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url] ([url]http://www.st-owners.com/forums/showthread.php?73238-ST1300-TupperWare-Worksheet[/url])
Cheers
Shiney
Thank you very much. Cheers Mick
Sent from my SM-T550 using Tapatalk
-
Thanks Shiney, much more sophisticated than my numbered egg carton!
-
I have been using the sheet for a while but I have added a small fishing tackle tray to hold the individual bits and pieces . I always move the sheet of knock it over and the parts move quicker than kids on icecream.
-
I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts :thumbsup
(But not so good for the plastic pins :fp)
-
For the actual removal of the fairings, the instruction can be found here: http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html (http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html)
Start with Remove the Inner Lower Cowl (http://www.touringmotorcyclists.com/docs/remove_inner_lower_cowl.pdf) :thumb
Cheers
Shiney
-
Thanks for these. Printed and laminated.
-
For the actual removal of the fairings, the instruction can be found here: [url]http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html[/url] ([url]http://www.touringmotorcyclists.com/tech_tips/st_tech_tips/front_fairing_removal.html[/url])
Start with Remove the Inner Lower Cowl ([url]http://www.touringmotorcyclists.com/docs/remove_inner_lower_cowl.pdf[/url]) :thumb
Cheers
Shiney
Hi, Shiney, did you save the above ? I can't open them. A PDF would be great.
-
Looks like the original site is gone.
-
There are seven PDFs at the bottom of the top post that still download, if that is what you are looking for.
Illustrated how-to's for removing the fairing.
-
Thanks Dragonstaff
-
Spot on Dragonstaff :thumbsup
Turn's out it was a good thing they were downloaded and attached since the website shut down :eek
The link to the outdated website has been removed from the original post and the attached files have been pointed out :grin
Cheers
Shiney
-
There are seven PDFs at the bottom of the top post that still download, if that is what you are looking for.
Illustrated how-to's for removing the fairing.
And I have used them this afternoon, doing an oil change and getting to know the bike.
-
I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts :thumbsup
(But not so good for the plastic pins :fp)
I glued my laminated sheets to 3 ply and drilled the appropriate sized holes, so even the plastic pins are now held in place.
-
I have added a magnetic strip to the back and laminated the sheets, this works a charm for the bolts :thumbsup
(But not so good for the plastic pins :fp)
I glued my laminated sheets to 3 ply and drilled the appropriate sized holes, so even the plastic pins are now held in place.
That's a really good idea :think1 I'll have to give that a go myself :grin
Thanks Biggles :-++
-
Does anyone have these PDF's available including the missing images?
-
Does anyone have these PDF's available including the missing images?
I do. PM me your e.mail address and I'll send them to you. :thumb
-
Many thanks to Pete I now have them :Like:
-
Any chance of getting the PDF's up on this site?
-
Hope these are complete
-
Thanks Glen, I had the 3 PDF's but not the Wordoc. I'm sure having the PDF's on the forum will help a lot of the new ST owners - they've certainly helped me put Scarlett back together.