Author Topic: Leaking Fork Seals  (Read 6320 times)

Offline Paul

  • Jr. Member
  • **
  • Posts: 53
  • ST 1300
Leaking Fork Seals
« on: August 10, 2012, 04:29:03 PM »
Hi STérs,

I noticed one of my fork seals was leaking a few weeks ago, so I ordered a set and proceeded to research how to do it my self. A google search showed link to little gadget (video Clip) that you insert between the seal and fork leg, $6 -7 from the US. After watching the video  :think1 Idecide that it was easy enough to make out of a piece of straight sided PET soft drink bottle, So I tried it out today and hey presto IT WORKS :hatwave :runyay :runyay :runyay :runyay

Here's a link to the video clip. www.sealmate.net/Fork-Seals-Repair-Tool

Now I've got aset of spare fork seals for when Ireally need them. :thumbs

Paul  :blu13
« Last Edit: August 10, 2012, 05:15:55 PM by Brock »
Paul


Beer is proof that someone loves us!
 

rendog

  • Guest
Re: Leaking Fork Seals
« Reply #1 on: August 15, 2012, 09:22:13 PM »
All good then, so long as you didn't loose too much oil.  :beer
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: Leaking Fork Seals
« Reply #2 on: August 16, 2012, 08:48:18 AM »
I have a few of those little devices from when they were on special and I was getting a few other things. An old trick is using a photo negative to do the same thing, as it is thin enough and strong.
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8714
  • Thanked: 1692 times
  • White is the fastest
Re: Leaking Fork Seals
« Reply #3 on: August 16, 2012, 08:51:46 AM »
Digital negatives dont work but....

 :grin :grin
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline Paul

  • Jr. Member
  • **
  • Posts: 53
  • ST 1300
Re: Leaking Fork Seals
« Reply #4 on: August 16, 2012, 05:14:38 PM »
I tried the old 35mm film but found it wrinkled  :o up to easily, must of been my over zealous digits :nahnah

Paul

 :blu13
Paul


Beer is proof that someone loves us!
 

Offline STeveo

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1639
  • Thanked: 406 times
  • ST Legend
Re: Leaking Fork Seals
« Reply #5 on: August 19, 2012, 07:57:11 PM »
I used the 35mm film cut to the shape of the tool in the video, worked a treat. Just done 736km on weekend ride and not a drop from right fork leg.

 :bl11
 

Offline IanB

  • Sr. Member
  • ****
  • Posts: 308
  • Thanked: 3 times
  • Trundler
Re: Leaking Fork Seals
« Reply #6 on: September 17, 2012, 06:27:47 PM »
Ta guys, sealmate etc won't work. The tubes were removed and cleaned and the spots can be seen plainly on one and faintly on the other. Looks like a brass finish underneath the chrome.
Maybe I needed to use the seal mate earlier and cleen out the grime. 
Might have to go back to the ole us of a websites and track down a cheap set.
Can't take it off the road for two to three weeks to have em rechromed.
Never under estimate the predictability of stupidity.
 

Offline STeveo

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1639
  • Thanked: 406 times
  • ST Legend
Re: Leaking Fork Seals
« Reply #7 on: September 17, 2012, 06:37:35 PM »
Saw a set on ebay last night. Would it really take two weeks to rechrome the legs.

 :bl11
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: Leaking Fork Seals
« Reply #8 on: September 17, 2012, 06:47:47 PM »
I had troubles on mine for a while due to all the bugs and hard stuff getting on the forks and chewing out the for seals (perhaps I should have cleaned them more religiously?). Having done a few in a short time I have not done any since fitting on some dirt bike fork gaiters for the last few years. There are also some soft foam covers that velcro on and give extra protection.
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline Breharna

  • Newbie
  • *
  • Posts: 47
Re: Leaking Fork Seals
« Reply #9 on: November 05, 2012, 02:09:34 PM »
Just ordered them  They are on special now from Seal mate directly.  $11 AUS for 2 of them delivered.  If it saves me pulling one fork leg off a customers bikes, then they've paid for themselves 20 times.....
Stewie Mac

SKM Motorsport
 

Offline Breharna

  • Newbie
  • *
  • Posts: 47
Re: Leaking Fork Seals
« Reply #10 on: November 15, 2012, 09:33:18 PM »
They arrived 10 days after ordering them from USA.  $11 delivered for 3x seal mate gadgets.  Anyway, did 2 bikes with them today, presto!!! they worked a treat.  Hopefully there goes (mostly) one of my pet hate jobs... :hatwave
Stewie Mac

SKM Motorsport
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Leaking Fork Seals
« Reply #11 on: November 15, 2012, 10:28:16 PM »
Just orderd two myself give that a go first and the take the forks iff if it dont work
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Leaking Fork Seals
« Reply #12 on: December 29, 2012, 05:54:44 PM »
Finally got a round two it and tried out the seal mate tool

Worked a treat took three or four goes then 600 ks round trip fork is still dry

No leak

 :thumb

Really hot ride on the Brand Hway 43 degree C
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: Leaking Fork Seals
« Reply #13 on: March 28, 2013, 11:56:40 PM »
Fork seal leaked again at Middleton got them replaced at Victor Harbour no problem since $185
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13