ST1300 Quartet Harness

[Sabie]

Hey Shiney, for future additions get the 4 plug, but you don't need the length of the standard harness, a bit shorter so you don't have to tuck and hide so much cable .... Just a thought.

[Shiney]

Hey Shiney, for future additions get the 4 plug, but you don't need the length of the standard harness, a bit shorter so you don't have to tuck and hide so much cable .... Just a thought.

Good points Sabie

The 4 plugs being what the standard one is should work without issue and I'd imagine would be easier to wire up, and as for the length, a short one would be fine as anything I wire in can always be made a bit longer if needed
But I'm happy to go with what ever length works for Brock

Cheers
Shiney

[StinkyPete]

Thanks Saaz.  I therefore won't use it for the lights, as I already have grip heaters and GPS on the harnass 

10amps total from memory

...........  I have no idea what the power rating is for the Quartett Harnass.

[Brock]

First custom harness, 500 mm long. The 2 pin and 3 pin plugs are available in Repco, and the 9 pin is a standard Hitachi .110 plug(socket)

[Gavo]

    are you taking orders Brock ?

If so let me be the first on your list 



Correction : make that second

[Brock]

The good thing Gavo, is that I can make one to your needs. You could have a lead taking power (and turn signals) to the rear under the seat, and/or up to the front under the dash. Even with extra relays switching high draw battery power for powering driving lights etc.

This one is for Shiney, just need to work out the pricing and do up a connection chart. Due to wire availability, the colours codes are a bit different..

[Shiney]

...
This one is for Shiney, just need to work out the pricing and do up a connection chart. Due to wire availability, the colours codes are a bit different..

   Thanks Brock