Power Pick up

[HunterTodd]

Hi All,

After an humiliating moment where I had to be push started by some of my Harley mates after leaving my heated hand grips on and flattening the battery I have finally put a relay in.

The only thing is despite sticking  my probe anywhere it will fit I can't find a wire that comes live when the ignition is turned on to switch the relay. I would like one near the battery but failing that anywhere on the bike would do. 

Any suggestions Tech heads?

[Brock]

Easy.

Use the quartet harness to supply all sorts of power options. There is a 9pin socket on the left side low down, in a plastic shield. Probaly full of dielectric grease.

[HunterTodd]

Well there you go I only looked on the right hand side of the bike.  Will I have to remove plastic to get to it?

[Brock]

Yep you do.I'm not sure exactly where it is, but some one will show up with a pic soon. Have a look in the quartet harness thrread. its a sticky thread 2 or 3 above this one in the electrics area (1300)

[tj189]

here you go, read through all the pdf docs

http://www.st-owners.com/forums/showthread.php?7714-ST1300-Quartet-Harness-Installation

enjoy

[ST2UP]

Multiple 12V accessory pick up points on the Left side at the relays.....