Honda ST1300 Section > Ask A Tech about your Honda ST1300

speedo not working

(1/4) > >>

tj189:
I have had a look on the net for fixes or hints and hope there are some more here.
the speedo is not working, odometer and other gauges appear ok.

i will check out connections on the right side and attempt to find the sensor at the back to see if any wires are missing, as a last resort I can check the connection on the instrument cluster at the back but if the rest of the gauges are working then that should be ok? are there any other hints please?

Abe:
Hi TJ189,
I have read lately if you have your tyres changed the sensor can be moved, but you use a 1/8" - 3mm drill bit for gap clearance of the sensor.
BUT, this is coming from an 1100 lover.

Cheers
Dave

tj189:
been a while since changing the tyres but I will check that, thanks

Biggles:

--- Quote from: Abe on August 13, 2013, 08:06:54 PM ---Hi TJ189,
I have read lately if you have your tyres changed the sensor can be moved, but you use a 1/8" - 3mm drill bit for gap clearance of the sensor.
BUT, this is coming from an 1100 lover.

Cheers
Dave

--- End quote ---

Nah- that's for the cruise control sensor.  The ST1300 measures it internally.

Abe:
Oops, sorry for that, thanks Biggles you saved me again.
BUT I did say I'm a 1100Lover.

Navigation

[0] Message Index

[#] Next page