Author Topic: Front and Rear Brakes Question  (Read 4590 times)

Offline jf3000

  • One Armed Bandit.
  • Sr. Member
  • ****
  • Posts: 277
  • Thanked: 68 times
Front and Rear Brakes Question
« on: January 14, 2015, 10:33:20 PM »
Probably a silly question but I am none the wiser, are the front pads the same as the rear?

Just asked these guys just to clarify they're for my ST1300

http://metalgear.com.au/mgear-brake-pads-sintered-p-5603.html

Alot cheaper than blue city who wanted to charge $110 per pair, damn rort, who told me to go to them cos they were good, not likely.

Thanks
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Front and Rear Brakes Question
« Reply #1 on: January 15, 2015, 01:08:29 AM »
Looks like front and rear use the same pads on the 1300 from years 2002 up to and including 2007 which are also the same pads as the 1996 and newer 1100A fronts

Strange they give a different part number for the 1100A rear but the front pads do fit the rear as well.
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Front and Rear Brakes Question
« Reply #2 on: January 15, 2015, 07:07:41 AM »
OEM front and rear pads are NOT the same for the 1300.
the rear are thicker

hope this helps,
my advice stick ONLY with original Honda pads...
Zev
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Front and Rear Brakes Question
« Reply #3 on: January 15, 2015, 09:56:22 AM »
OEM front and rear pads are NOT the same for the 1300.
the rear are thicker

hope this helps,
my advice stick ONLY with original Honda pads...


What can I say but have a look at the page http://metalgear.com.au/view_model_details.php?model_id=4256

Front pads up top, rear pads down the bottom..........dimensions are the same when you select the pad number.

1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline cravenhaven

  • Sr. Member
  • ****
  • Posts: 318
  • Thanked: 104 times
  • Coomba Bay, NSW
Re: Front and Rear Brakes Question
« Reply #4 on: January 15, 2015, 11:44:50 AM »
You can buy genuine honda pads from David Silver in the UK for 18.95 pounds per set plus delivery. Will certainly be a lot less than the $110 you mentioned.
http://www.davidsilverspares.co.uk/
 

Offline winston66

  • Legendary Member
  • *****
  • Posts: 505
  • Thanked: 47 times
  • 1996 Yamaha Royal Star XVZ13, 2003 ST 1300,others
Re: Front and Rear Brakes Question
« Reply #5 on: January 15, 2015, 12:16:25 PM »
From memory on my 2003 1300 there is some differences between the front and rear.
I think that the rear should have a extra slit in the backing plate which works as a key way when fitting. I think that I had to modify the last set that I purchased off the E Bay, Supposed to fit but would not , So used the trusty angle grinder to cut out the little key way slot as required . I suggest when you pull the pads do a comparison check between the front and rear of the old  sets of pads.
 The memory also tells me that something was too thick to fit in also , so I only replaced one side and then reused one of the least worn old pads for the other side , also I left out the stainless backing pad in order to get the extra clearance required.
I do not do a big mileage and I have a brake pad inspection down on the must do maintenance list which is due in a couple of months , just in order to keep an eye on things.
Hope that this helps,
Chers, Winston66
winston66 Northampton
Ulysses #56870
Current Rides,
1996 Yamaha XVZ 1300 Royal Star,
2003 ST 1300 A (red)
Mazda Miata MX5 Turboed 14 sec.
2006 ST 1300 ABS Ex Police (white)
Honda CT 110 Postie, (Being rebuilt)
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Front and Rear Brakes Question
« Reply #6 on: January 15, 2015, 01:08:44 PM »
I found the OEM Honda pads for my 1100A had the backing plate which my current set of ceramic aftermarket ones didn't have but the pads would not go in using the old plate so I left them off.

1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 659
  • Thanked: 414 times
  • White Phoenix
Re: Front and Rear Brakes Question
« Reply #7 on: February 17, 2016, 10:55:57 PM »
 :blu13 I just replaced the rear pads on my ST1300 (shineys old one) and noticed the new pads from metalgear are a LOT thinner, leaving my pistons sticking way out????  :blu13left :eek
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix
 

Offline tding

  • Full Member
  • ***
  • Posts: 149
  • Thanked: 57 times
  • ST Legend
Re: Front and Rear Brakes Question
« Reply #8 on: February 18, 2016, 11:12:41 AM »
just looked the parts up.
front pads left 06455-MCS-G02       $117.60
              right 06455-MCS-G02       $117.60
      rear pads  06435-MCS-G02       $125.28

http://www.peterhillhonda.com.au/

 :blu13
 
The following users thanked this post: Draco (Heartbreak Kid)

Offline cravenhaven

  • Sr. Member
  • ****
  • Posts: 318
  • Thanked: 104 times
  • Coomba Bay, NSW
Re: Front and Rear Brakes Question
« Reply #9 on: February 18, 2016, 11:30:56 AM »
And from DavidSilver spares in the uk
06455-MCS-G02 - 27.50 ~ $55
06435-MCS-G02 - 27.50 ~ $55

+ freight of course but still much cheaper than buying here.
 
The following users thanked this post: Draco (Heartbreak Kid)

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Front and Rear Brakes Question
« Reply #10 on: February 18, 2016, 06:10:57 PM »
The front pads can be fitted to the rear, as they are the same shape, but are thinner than the rear. The rear pads will not fit in the front.

Have a look at Metal Gear for replacement pads, they are good, cheaper and easily purchased on the net.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: Draco (Heartbreak Kid)

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 659
  • Thanked: 414 times
  • White Phoenix
Re: Front and Rear Brakes Question
« Reply #11 on: March 03, 2016, 07:29:46 PM »
The front pads can be fitted to the rear, as they are the same shape, but are thinner than the rear. The rear pads will not fit in the front.

Have a look at Metal Gear for replacement pads, they are good, cheaper and easily purchased on the net.


 :blu13 I went and spoke to the owner and he said any of these can be fitted to the rear , just depends on how thick you want them: 30 057 S, 30 145 S, 30 317 S..
 OR if like me live 3k from Brendale go pick them up :grin :grin :thumb :blu13left
« Last Edit: March 03, 2016, 07:32:59 PM by Draco7 »
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix