OzSTOC

Honda ST1100 Section => Brakes & Clutch ST1100 => Topic started by: ulster on November 18, 2018, 08:17:14 PM

Title: clutch rattle
Post by: ulster on November 18, 2018, 08:17:14 PM
where is the bearing located in the ST1100 clutch that needs to be replace to stop clutch rattle
Title: Re: clutch rattle
Post by: alans1100 on November 18, 2018, 11:55:50 PM
Hi and welcome aboard.

Item 21 and 22 here https://www.st-1100.com/st1100-parts-fiche-clutch-st1100ax.html (https://www.st-1100.com/st1100-parts-fiche-clutch-st1100ax.html)

Before you go and rip the clutch out take note that the 1100 is normally a little noisy around the cutch area.

This is some of the posts on the subject from a few years ago. http://ozstoc.com/index.php?topic=7557.msg86789#msg86789 (http://ozstoc.com/index.php?topic=7557.msg86789#msg86789)
Title: Re: clutch rattle
Post by: Brock on November 19, 2018, 06:22:39 AM
If You mean the groan when starting off in 1st while cold, then its normal. I have never heard a clutch rattle, my bike is at 180000Ks