Author Topic: Corrosion advice for a non-ST reST  (Read 1577 times)

Offline SteveR

  • Sr. Member
  • ****
  • Posts: 298
  • Thanked: 61 times
Corrosion advice for a non-ST reST
« on: April 24, 2018, 05:02:55 AM »
Howdy all!  I'd appreciate some input from some of our seasoned mechanics on a restoration project I'm working on at the moment...

Long story short, water-cooled aluminium block engine, originally had a couple chromed pipes in the cooling system.  Chrome has gone to pot, so I'm planning on sanding them back and doing an electrolysis copper-plating on them (partly for a cheap corrosion resistance, mainly for the aesthetic).  Just wondering if anyone had any experience with copper PLATING in a cooling system using Ethyl-Glycol coolant?  I'm just wondering whether the plating on the inside could have the potential to play up if it's not perfect (or even if it is!).

Appreciate any input, tanks guys. 
"Not all those who wander are lost"
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5564
  • Thanked: 2098 times
  • Just Ridin'
Re: Corrosion advice for a non-ST reST
« Reply #1 on: April 24, 2018, 06:59:06 AM »
Plug the ends of the pipes before plating so it only goes on the outside.

Sent from my SM-G930F using Tapatalk

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline SteveR

  • Sr. Member
  • ****
  • Posts: 298
  • Thanked: 61 times
Re: Corrosion advice for a non-ST reST
« Reply #2 on: April 24, 2018, 10:07:56 AM »
Plug the ends of the pipes before plating so it only goes on the outside.

Sent from my SM-G930F using Tapatalk

...I hate it when the answer is that simple!! Haha! Thanks mate, will do.
"Not all those who wander are lost"
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Corrosion advice for a non-ST reST
« Reply #3 on: April 24, 2018, 11:58:18 AM »
You could also try using brass or stainless fittings, they are more alloy friendly.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Online STeveo

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1639
  • Thanked: 406 times
  • ST Legend
Re: Corrosion advice for a non-ST reST
« Reply #4 on: April 24, 2018, 05:21:29 PM »
Radiators are (old ones) made of copper so cannot see it being a problem. If your worried about corrosion why not use waterless coolant? This is what I use in all my liquid cooled bikes, no corrosion, no overheating and lasts for ever.
http://liquidintelligence.com.au/products/motorcycle-super-waterless-coolant