Honda ST1100 Section > Suspension ST1100
fork assy
(1/1)
creeture3:
Hi folks, I have a question: I wish to change the oil in the forks ( 1999 ST ABS etc., etc. ) , but I don't wish or need to disassemble the forks.
Now, if I undo the damper rod bolt, should the whole lot just slide out? I e.: the spring, damper rod etc., and then all I need to do is empty the fork, re-fill and slide the whole lot back in again ??
One othe r thing, what weight is the standard oil? Mr. Honda recommends SS7, whatever that is..................
Cheers.
Shiney:
Hi creeture3,
Have a look at the following posts, they may be of some help :thumbsup
(This one has pictures and instructions :grin)
http://ozstoc.com/index.php?topic=4936.0
(This one has some good info)
http://ozstoc.com/index.php?topic=3326.0
Hopefully they will help you out :thumbs
Cheers
Shiney
creeture3:
Hi Shiney, I was more concerned about being able to compress the springs to remove the top collar, so as to remove/replace the spring. I have since disassembled the left fork and it was relatively easy to compress the spring.
Unfortunately I have rheumatism in each of my hands, and I was concerned about that, but it seemed fine on the left hand fork.
Looking around, it seems 10 wt oil,is the go ....................
Cheers
Shiney:
Glad to hear you got it sorted mate :thumbs
Sent from my SM-N9005 using Tapatalk
Navigation
[0] Message Index
Go to full version