OzSTOC
Honda ST1300 Section => Ask A Tech about your Honda ST1300 => Topic started by: Craig on March 01, 2019, 01:23:33 PM
-
Hi All
I was talking to Shiney a while back and mentioned I was looking into getting the above, he mentioned I should post it once I got it and installed on my ST1300 as there were concerns about tyres deflating rapidly on the tube due to rubber stem valve. Well I found a way around that by installing Stainless Steel Stem Valves. The FOBO 2 seems to be working a treat, Brisbane Motorcycles fitted the stainless stem valves quickly and efficiently for only $60 odd. BTW the Straight SS Stem valves come in the box with the sensors, though I ended up ordering the T Stem Valves which were another $ 15 each. That way I don’t need to remove the sensor to add or deflate the tyre. Here are some pics of the set up.
(https://uploads.tapatalk-cdn.com/20190301/53c32bac8836434fed39ff22d3de786f.jpg)
(https://uploads.tapatalk-cdn.com/20190301/07871354863791d5415386d6f4553cb9.jpg)
(https://uploads.tapatalk-cdn.com/20190301/fbd1a563250fed04104c3977c24f24a2.jpg)
Sent from my iPhone using Tapatalk
-
Hopefully this is the right one https://www.fobotyre.com.au/fobo-bike/ (https://www.fobotyre.com.au/fobo-bike/)
-
It looks the same... I purchased mine overseas so maybe different t packaging but basically it hooks up to your smart phone and once you are near tells shows you the pressure and tyre temp.
(https://uploads.tapatalk-cdn.com/20190301/67a9b200794084a9b71ba93db8925754.jpg)
Sent from my iPhone using Tapatalk
-
Looks good mate and I like the T Stem Valves :thumbsup