Author Topic: Brake Pad Longevity  (Read 3981 times)

Offline Hendo

  • Full Member
  • ***
  • Posts: 155
  • Thanked: 4 times
Brake Pad Longevity
« on: March 30, 2015, 01:31:01 PM »
How long do people usually get out of a set of brake pads. I know this is like asking how long is a bit of string, as people brake differently, highway kms use nowhere near as much as commuting etc.

The reason I'm asking is that when I had the tyres changed on the weekend I noticed the pads were lower than I expected.
Going through the bikes records I noticed it has only done 10,000 kms since they were changed. I have done approx 2,300 kms of those 10,000 kms and I have been relatively easy on them ( read approx 1700 highway kms).

The pads fitted are Ferodo sintered.

Was the previous owner dragging the brakes all the time?

 :13Candy
Hendo

Ex Bikes
SRX250; GT380; GSX-250F; XT-250; ZZR-250;  ST1100 - RIP

Current Bikes
GV650; ST1300
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Brake Pad Longevity
« Reply #1 on: March 30, 2015, 01:38:02 PM »
My OEMs did 25,300 kays.
The first lot of Metalgear Sintered did 30,900.
Oddly, the second set only did 22,000.
Most recent Metalgear Sintered:  26,500.

I'm a bit harder on rear pads than front- more use in cornering, I suppose.


For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Brake Pad Longevity
« Reply #2 on: March 30, 2015, 04:27:55 PM »
Since your brakes are on par with the 1100A (1996 and newer) at least up until the 2008 1300 I'll add that my first pad change was at around the 75-80,000 mark on both wheels. They were replaced with a cheap aftermarket set which were always a little noisy compared to OEM. I put OEM pads back in after about 20,000 km which were replaced last august year at 165,000 km

The first set had mainly 75% HWY use which might explain it. The third set is more like 50% HWY use and still had plenty of pad left when I swapped them out.
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Brake Pad Longevity
« Reply #3 on: March 30, 2015, 04:57:35 PM »
The first set had mainly 75% HWY use which might explain it. The third set is more like 50% HWY use and still had plenty of pad left when I swapped them out.

We might only get one third the mileage out of our brake pads, but I'll still prefer to live in the city, thanks muchly.  :wink1   
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Brake Pad Longevity
« Reply #4 on: March 30, 2015, 05:27:20 PM »
The first set had mainly 75% HWY use which might explain it. The third set is more like 50% HWY use and still had plenty of pad left when I swapped them out.

We might only get one third the mileage out of our brake pads, but I'll still prefer to live in the city, thanks muchly.  :wink1
Even when I'm back in the city I tend to still use mainly engine braking and use the brakes when needed........
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Brake Pad Longevity
« Reply #5 on: March 30, 2015, 08:20:40 PM »
Even when I'm back in the city I tend to still use mainly engine braking and use the brakes when needed........

Nah.  I go flat chat from red light to red light.     :grin
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline STroppy

  • STroppy (Terry - the name on the TeeShirt)
  • RTE Coordinator
  • Legendary "1000 Club" Member
  • *
  • Posts: 1860
  • Thanked: 736 times
  • CountryMember! Mob 0412499625
Re: Brake Pad Longevity
« Reply #6 on: March 30, 2015, 08:38:31 PM »
I've heard that, you young Hoon! . .
Terry, Canberra 0412499625
Ulysses #22354, FarRider #761
Current bikes 2013 Triumph Trophy SE, 2008 ST1300
Previous bikes1948 Triumph Tiger 500 Twin - sprung rear hub, 1963 BSA Bantam 175, Yamaha 75cc & DT250, Honda ST1100, 400N & CX500 sports, BMW K100RS & K100 LT, Harley Electra-glid
 

Offline spanner

  • Blue is better .... apparently
  • NatRally 2018 - Mackay
  • Legendary "1000 Club" Member
  • *
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Brake Pad Longevity
« Reply #7 on: March 31, 2015, 08:10:56 AM »
[

Nah.  I go flat chat from red light to red light.     :grin
[/quote]


you and me both !!!!!

 :nahnah :bl11 :bl11 :bl11 :bl11 :bl11 :bl11     :law :o :cop
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.