OzSTOC
Honda ST1300 Section => Electrics & Electronics - Volts, Amps and Fuses ST1300 => Topic started by: troy_s on October 28, 2017, 11:56:45 AM
-
Morning all,
Just finished cleaning the bike (first mistake) and now the LCD display is flashing about 4-5 times a second - with the keys out.
Start the bike and all returns to normal until turned off, then it goes back into disco mode.
I am guessing that there is water somewhere where it isnt meant to be and hoping it will stop flashing when it dries out
but....
Hoping someone may have come across something similar and have a workable solution.
cheers
Troy
-
Never heard of it before. Since it's apparently water-related, leave the bike out in the hot sun.
I've ridden through sheeting rain for hours without that symptom. You must have sprayed water in from the rear where it's not supposed to come from. Obviously more care needed. :-(((
-
Consider me suitably chastised
-
Has it come good?
Sent from my SM-G930F using Tapatalk
-
All good now.
Teach me to clean it.
-
Thanks for letting everyone know about the issue mate :-++
If it happens to anyone else down the track they will now know that it just has to dry out :thumbsup
Cheers
Shiney