OzSTOC
Farkles, Gear & Accessories => Farkles and Gear General Section => Topic started by: Gavo on November 21, 2011, 03:41:45 PM
-
Just putting it out there incase you have done it already :hatwave
Is there a switch out there that can go into the blank space between the Kill switch and the starter button?
Preferably slide left and right for on / off thumb operated. Much like the indicators left / right. :think1
Want somthing there as a master control swith to operate spot lights, that are currently being fitted. 8)
-
Fit a police switch assy, its got lots of switches that are good for many many things.
:thumbsup :thumbsup
Its easier than trying to remake your switch..
:popcorn
-
Dont know enough about the police swithing arrangement to be able to make a decission in regards to that. :fp
-
(http://img.photobucket.com/albums/v235/Avtrician/PolSwitch.jpg)
Switch positions as used by police.(WA)
1. RednBlue strobes
2. Strobe on pole plus 1.
3. 1 + 2 and momentary siren.
4. Siren on
5. Electronic Pack / siren Power on???(not sure, )
6. pole light/strobe dim?? (switches an earth in the strobe pack){I know its not on the switch block, its on the left panel on the 1100}
7. Not used connected (Go to the main right hand connector, just plugs straight in)
8. Not used connected (Go to the main right hand connector, just plugs straight in)
Some of these configs dont quite match the wiring diagram, and I havent got around to checking them yet.
Top Swich. Kill Switch
Bottom Right. Start switch
-
This was where i got the idea but want to do it better with a slide type arrangement.
http://www.ridethatbike.com/ST1300/ST%20HANDLEBAR%20SWITCH.htm
The police switch is alot,
alot of options
and options are a good thing
-
Jaycar should have suitable mini switches , with water proof covers if I remember correctly
-
End result from Jaycar
Rocker type switch sideways mounted
(http://i1095.photobucket.com/albums/i461/gavo66/ST%20Cub/IMG_0255.jpg)
-
Other alterhatives over the brake and clutch
http://www.ridethatbike.com/ST1300/ST1300%20HANDLEBAR%20SWITCHES.htm
somewhere i have seen them in silver
-
The ones I saw originally used the body from an old brake reservoir fits on top easily and switches mounted inside
-
These look better than resovour mounts
http://www.pashnit.com/product/pmr/bar_switches.html
-
They do look good, but do they fit the ST
-
Those switches from PMR look the goods. Dam simple and look fine. Heres a "Link" to the site
http://pmrcomponents.com/pmrweb2_045.htm
-
Now they do look the goods & OEM to boot will order some tonight thanks terrydj the best I've seen so far :thumbs :thumbsup
-
Mate simple works :thumbs