Author Topic: black smoke  (Read 2046 times)

Offline royst1100

  • Legendary Member
  • *****
  • Posts: 590
  • Thanked: 42 times
  • ST Legend
black smoke
« on: April 22, 2012, 08:36:48 PM »
im thinking the STeed may be running rich. a friend was behind me recently and said smelt rich with black smoke emitting from the pipes. plugs do not last long, black and sooty

ive put a K&N fitter on and modified stock pipes. a small misfire i think but so minor cannot track down. just put delkevic pipes, still bit sooty when i pulled out the baffles. more power  but still smells a bit rich. i havent replaced fuel filter for quite some time as ive found it hard to get them. team moto never has em when i go over there.

anyonelse had this problem and how did you fix it
regards
           Royce
 

Offline Shaun

  • Professor
  • Sr. Member
  • ****
  • Posts: 344
  • Thanked: 6 times
  • Ride and Teach
Re: black smoke
« Reply #1 on: April 22, 2012, 08:47:29 PM »
Black smoke is usually a sign of incomplete combustion. I would be checking the air intake to make sure enough oxygen is getting to the cylinders.

Cheers, Shaun
:bl11 Blue 2001 ST1100 ABS Pan European (RIPieces) :(
New STeed: 2006 6th Gen VFR800Fi Sports Tourer
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8724
  • Thanked: 1697 times
  • White is the fastest
Re: black smoke
« Reply #2 on: April 22, 2012, 09:59:31 PM »
Do you have the foam liner fitted to your K&N, if so remove it. You have restricted to airflow too much. This has been a continuing problem over on the STOC Forum.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: black smoke
« Reply #3 on: April 23, 2012, 08:51:38 AM »
Definitely make sure that foam sleeve is not on the filter. And make sure the filter is not over oiled, as it only has the be very lightly done. Both of these conditions would restrict air intake and make it run rich.  Also have a look to see if the choke is going fully off.

ST11s do seem to run rich on the overrun. Mine still does it even though I leaned the pilot screws a bit and put in new jet needles and needle jets.  A dyno run a few years back had shown the bike was rich midrange.  Runs cripser but fuel economy unchanged when cruising along but better when I get stuck into the throttle.
« Last Edit: April 24, 2012, 07:59:32 AM by saaz »
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline royst1100

  • Legendary Member
  • *****
  • Posts: 590
  • Thanked: 42 times
  • ST Legend
Re: black smoke
« Reply #4 on: April 23, 2012, 02:06:04 PM »
shoulda said my K&N didnt have a sleeve. first one did but was damage in transit,  replacement didnt have sleeve
regards
           Royce
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14059
  • Thanked: 2508 times
  • Bridgeman Downs, Brisbane
Re: black smoke
« Reply #5 on: April 23, 2012, 10:29:45 PM »
Ah- you need Fuel Conditioner.  Fixes everything!   :grin
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927