Author Topic: Modified Screen fitted  (Read 4420 times)

Offline Tackleberry

  • Sr. Member
  • ****
  • Posts: 367
  • Thanked: 4 times
  • QUEENSLANDER!!!!!!!
Modified Screen fitted
« on: September 14, 2012, 12:37:01 PM »
OK I have ridden around for a little while without a screen and thought what a great idea this is to get airflow happening, but I need something to finish off the look of the bike.  So I posted in the wanted section (http://ozstoc.com/index.php?topic=2178.0) for a screen and I got a very kind donation from TIPSY with a screen he had sitting around.  He promptly posted the spoils of collecting bits and pieces and yesterday I received a box from Mr Postman and it had this in it: 

 

So I promptly went about using one of these: 

  to make a few very minor modifications   

After i did that I used some of this: 

  and did this   

So in 24hrs I have gone from: 

  to this:  and I'm now doing this :hatwave :runyay 

Now 310mm from top to bottom at centre measurement.  Thanks again TIPSY for your generosity.  Salvos are a little richer for your donation too. 
« Last Edit: October 15, 2012, 11:14:46 PM by Tackleberry »
Steve
Only the guy in the glass matters..... 
Ride on Davo it's your road now.
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8724
  • Thanked: 1697 times
  • White is the fastest
Re: Modified Screen fitted
« Reply #1 on: September 14, 2012, 01:01:48 PM »
You cant see through the screen now that you have painted it.... Wont one of those nasty QLD coppers give you a yellow sticker for that?????

 :grin :grin :grin
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

terrydj

  • Guest
Re: Modified Screen fitted
« Reply #2 on: September 14, 2012, 02:07:05 PM »
Looks bloody excellent. Still a touch too high me thinks but a heap better than standard. "Well Done" High Gloss Nahhhhhh Matt Black is the go
 

Offline Tubadave

  • Newbie
  • *
  • Posts: 4
  • ST Legend
Re: Modified Screen fitted
« Reply #3 on: September 14, 2012, 03:06:24 PM »
G'Day St riders I'm new to the group. Can any one suggest to me an after market windshield for my st1100. The one on on mine has been cut down and I'd like a higher one. Also I'm looking for abs parts if any on knows of any one wrecking st1100s (perish the thought).  I can supply the part numbers.  one other question what sort of fuel consumption can I expect?   
Tubadave   :bl11 
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Modified Screen fitted
« Reply #4 on: September 14, 2012, 04:43:17 PM »
I just did a 4000km ride and averaged just over 18.5 km/l (if you want l/100km you'll need to work it out). Eagle Screens do a couple of different sizes for the ST1100 they have a website with pics.
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 

Offline STeveo

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1642
  • Thanked: 408 times
  • ST Legend
Re: Modified Screen fitted
« Reply #5 on: September 14, 2012, 04:45:05 PM »
Hi Tubadave, try www.screensforbikes.com.au in Melbourne. They do any size (higher, wider, tinted etc) and mine was $260 delivered, 100mm higher and 50mm wider for 1100. I get around 5 to 6l/100km depending on right wrist movement, around 480km to 500km per tank.
Steve.

 :bl11
 

Offline Tackleberry

  • Sr. Member
  • ****
  • Posts: 367
  • Thanked: 4 times
  • QUEENSLANDER!!!!!!!
Re: Modified Screen fitted
« Reply #6 on: September 14, 2012, 05:10:35 PM »
You cant see through the screen now that you have painted it.... Wont one of those nasty QLD coppers give you a yellow sticker for that?????

 :grin :grin :grin

As it is below the level of the dash it doesn't matter thank Mr smarty pants :grin because I couldn't see through it anyway before due to the other stuff mounted. 

My screen from to to bottom is a touch under a half a meter at 47m. 

 
Terry you said in your post that yours was 470mm from centre to top and mine is 310mm.  Are you planning on cutting yours down again?  I have ridden around with mine and I am happy with the height at 310mm so I'll see how I go with this for a while and reassess it after a couple of highway runs. 

TabaDave there are a number of companies that sell screens that have extra height added if you like the higher screens.  Try eBay for parts also mate as there are plenty available - just watch postage before you buy.  Good luck buddy. 
Steve
Only the guy in the glass matters..... 
Ride on Davo it's your road now.
 

Offline Tipsy

  • Landed Gentry
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1342
  • Thanked: 48 times
  • Laurie
Re: Modified Screen fitted
« Reply #7 on: September 14, 2012, 06:45:50 PM »
 :wht11 py

Nice Job there Tack.  :beer

Tipsy
I am lost and haves gone to find myself
Now If I get back before I return
Please ask me to wait.
 

terrydj

  • Guest
Re: Modified Screen fitted
« Reply #8 on: September 14, 2012, 07:11:32 PM »
Bloody hell I'm good :runyay
Its 310 cause I measured again with my eyes open and the lights on.
Took me a few cuts and I love it
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Modified Screen fitted
« Reply #9 on: September 14, 2012, 10:08:58 PM »
I believe Chris and I will be checking it out tomorrow arvo at frosty Mango..... Looking forwardto meeting you Tak.

See you then

Sabie
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline Rooster

  • Rooster
  • Newbie
  • *
  • Posts: 24
  • White 2000 ST1100P
Re: Modified Screen fitted
« Reply #10 on: October 15, 2012, 10:38:39 PM »
I've put a MRA VARI MAX on my St1100. It is 570 tall it comes in two sections so their is some adjustment of about 25 mm. I'm about 180 cm tall and can see over the screen easly. Beefa has also ridden mine he is a couple on inches shorter and can still see easly over the screen. Noise is reduced you can hear the bike instead of the wind and legal speeds you can ride with the visor up. The MRA are a great screen. Got it on eBay from England arrived is approx 8 days. The double screen allows for airflow. I would RECOMEND the MRA MAXI