OzSTOC
Honda ST1100 Section => "How To..." Instructions and Pics for Regular Maintenance Jobs specific to the ST1100... => Topic started by: Big Gaz on October 23, 2018, 07:44:34 PM
-
:dred11
Help :think1
Ive battled the fork seal replacement and i have come to a noisy no further.
I have the slides in , seal and retaining clip
And oil .
I cant seem to compress the tube eneogh to do up the small bolt on the bottom of the fork .
Any help would be great .
Cheers
Gaz
-
If that bolt is not in situ the oil will drain out, that holds the damper in place.
-
Maybe you could try using a longer bolt of same thread size to insert and try and pull the shaft down to the open hole . . If need to I think you can top up the oil thru that bolt hole . .
-
Maybe you could try using a longer bolt of same thread size to insert and try and pull the shaft down to the open hole . . If need to I think you can top up the oil thru that bolt hole . .
Thanks STroppy and Yorkie . I will see if i can find a bolt or some threaded bar .
-
I started to watch an interesting youtube on replacing GL1500 fork seals the other day but tonight only have limited internet so suggest you search youtube for GL1500 Fork seals.
-
I started to watch an interesting youtube on replacing GL1500 fork seals the other day but tonight only have limited internet so suggest you search youtube for GL1500 Fork seals.
is this the one??
https://youtu.be/tloGOjZDtlU (https://youtu.be/tloGOjZDtlU)
-
I started to watch an interesting youtube on replacing GL1500 fork seals the other day but tonight only have limited internet so suggest you search youtube for GL1500 Fork seals.
is this the one??
https://youtu.be/tloGOjZDtlU (https://youtu.be/tloGOjZDtlU)
What was that one supposed to be?
-
]
is this the one??
https://youtu.be/tloGOjZDtlU (https://youtu.be/tloGOjZDtlU)
Sorry can't afford one of those
But this one might be the one Glen suggested https://youtu.be/4ssZXBHL8Z4
-
ummm ..... thats NOT the you tube clip I got the link for!!!!!!! :CB--