WA riders UHF Poll

[Brock]

For the WA Riders, do you have a UHF radio, if so how many channel.

This query comes about after the Dwellingup RTE, where the channels being used were fairly heavily used. The result will help in picking a clearer channel for rides.

[Pezzz]

Wombat must not have voted yet as i see no takers on the last one...   
       

[STRay (Roo Killer)]

     Look again! I will get mine working properly eventually ( I hope ) 

[Brock]

We will have to have a major work day on yours Ray.

[Wombat]

I havent seen the pole because i have been working on it. 
I may need a volunteer to test again

and the diiscussion on the air intake led me to look and you are right Pezzz they only clip onto the outside with the main intake below air cleaner into small primary filter. and I have only one. I thought i was riding lopsided 

 

[Pezzz]

I havent seen the pole because i have been working on it. 
I may need a volunteer to test again

and the diiscussion on the air intake led me to look and you are right Pezzz they only clip onto the outside with the main intake below air cleaner into small primary filter. and I have only one. I thought i was riding lopsided 

 

Always happy to test something. So I am not the only one where the air intake hoses from the front of the tupperware just terminate in the engine bay behind the air filter .....    Seems rather strange.
If i can get up the motivation i will take all the plastic off this week sometime and get some photos.

[STRay (Roo Killer)]

Always happy to test something. So I am not the only one where the air intake hoses from the front of the tupperware just terminate in the engine bay behind the air filter .....    Seems rather strange.
If i can get up the motivation i will take all the plastic off this week sometime and get some photos.

They are not the air intake for the engine, they were put there to put some cool air beside your knees! ( wierd, but true! )

[Turtle]

Give me a pm Bill if you need a test on the radio

[Pezzz]

Always happy to test something. So I am not the only one where the air intake hoses from the front of the tupperware just terminate in the engine bay behind the air filter .....    Seems rather strange.
If i can get up the motivation i will take all the plastic off this week sometime and get some photos.

They are not the air intake for the engine, they were put there to put some cool air beside your knees! ( wierd, but true! )

Ahhhh .. clear as mud now......

[Wombat]

They are not the air intake for the engine, they were put there to put some cool air beside your knees! ( wierd, but true! )

Thats why Turtle was looking happy in his LD comfort Jocks. I assume the 1300 has the same air coolers or was he smiling about something else 
 

[Yorkie]

mine are supported to the base of air filter to get air to the inlet, there is no way air can get out to your knees.
I apologise to Brock for getting off subject.

[Wombat]

OK back on subject.    We need 2 channels for comms. One for an 80 channel and one for the 40.    After Dwellingup and the overflow from ch40 to ch39 it was suggested ch50 and ch26. it would be good for Ballarat so we can call on the way and during the run.
my 2c 

Brock we need at least a 5c for comments

 

[Brock]

I agree.

put the 5c on my bill....

[Yorkie]

If we have a channel for 80 and a channel for 40, how do we know who we are going to talk to?, especially if it is a mixed group.
And I am not doing this for 5c.

[Brock]

If there is a bike with a 40ch set, we will just stick a 50 on the dial..

really, we will just drop to 26...

50 is very quiet..

[Turtle]

I have now updated to a 80

Turtle

[Brock]

Whoo Hoo

 

By the way, you can change your vote...