OzSTOC

Honda ST1100 Section => Honda ST1100 General Questions => Topic started by: Ajay on November 16, 2021, 02:31:01 PM

Title: Adhesive types for plastics
Post by: Ajay on November 16, 2021, 02:31:01 PM

Hi all. I need to repair some bodywork and other plastics and have tried araldite & locktite plastics superglue with no success. Any suggestions please ? Thanks

Title: Re: Adhesive types for plastics
Post by: CallMeSteve on November 16, 2021, 02:38:15 PM

JB-Weld is pretty good.  You can get it from Jaycar.

Title: Re: Adhesive types for plastics
Post by: StinkyPete on November 16, 2021, 02:53:36 PM

Our own "John g" does excellent plastic bodywork and spraypaint repairs, but he's in Port Elliot in SA.     He fixed "Shillas" ST1300 bodywork after he hit a roo, which smashed his side panel into numerous bits.

Title: Re: Adhesive types for plastics
Post by: ruSTynutz on November 16, 2021, 06:20:27 PM

(https://i.ibb.co/ggkyJK8/Selleys.png)

I've found this works well on ABS plastics...  :thumbs

Title: Re: Adhesive types for plastics
Post by: Ajay on November 16, 2021, 07:07:12 PM

Ok thank you. It’s looks like a similar system to loctite but I’ll give it a crack 👍

Title: Re: Adhesive types for plastics
Post by: Dragonstaff on November 17, 2021, 07:56:41 PM

Failing that, a good plastic welder should be able to help.

Title: Re: Adhesive types for plastics
Post by: John g on December 11, 2021, 09:21:31 AM

 :bl11
  Sorry for a late reply,I only just saw the post..The. Best adhesive is Fusor 153.it should be available from most crash supplies ,if not give me a pm and I'll get you some. o:)