Author Topic: Mirror Cover Retaining Clips  (Read 5969 times)

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Mirror Cover Retaining Clips
« on: April 30, 2016, 08:31:54 PM »
I'm now the proud owner of a 2005 ST1300 (burgundy) and noticed after picking her up that the previous owner has blue tacked the mirror covers on as the clips that fit into the fairing are mostly broken. I have talked to my local dealer and we are having difficulty identifying the clips from the microfiche. Has anyone ordered these clips before and if so I'm after the part number.
Any assistance appreciated.

Keith
Keith
02 Ex Police ST1100
05 ST1300
 

Offline Brian

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1672
  • Thanked: 296 times
  • ST Immortal
Re: Mirror Cover Retaining Clips
« Reply #1 on: April 30, 2016, 08:47:01 PM »
I jus wanna ride my bike

09 ST1300 Charcoal Metallic (Grey GhoST)
09 ST1300 Candy Glory Red (Red MiST)
 

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #2 on: April 30, 2016, 08:57:51 PM »
Already been there, similar issue as looking at the fiche at the dealer. Not enough fine detail to identify the item I need.
Keith
02 Ex Police ST1100
05 ST1300
 

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 656
  • Thanked: 412 times
  • White Phoenix
Re: Mirror Cover Retaining Clips
« Reply #3 on: April 30, 2016, 08:59:09 PM »
 :blu13 item #7 pretty sure they the ones he wants :blu13left
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix
 

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 656
  • Thanked: 412 times
  • White Phoenix
Re: Mirror Cover Retaining Clips
« Reply #4 on: April 30, 2016, 09:01:26 PM »
Already been there, similar issue as looking at the fiche at the dealer. Not enough fine detail to identify the item I need.

 :blu13 i think they are the 3 clips that hold the mirror housing on Yes/No??  :think1 :blu13left
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix
 

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #5 on: April 30, 2016, 09:11:14 PM »
Number 7 is a 5mm bolt with the associated plastic fairing clip. Already looked at that one.
Keith
02 Ex Police ST1100
05 ST1300
 

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 656
  • Thanked: 412 times
  • White Phoenix
Re: Mirror Cover Retaining Clips
« Reply #6 on: April 30, 2016, 09:14:14 PM »
Number 7 is a 5mm bolt with the associated plastic fairing clip. Already looked at that one.

 :blu13 sorry thought you were after what holds the housing on...my bad :grin :blu13left
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix
 

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #7 on: April 30, 2016, 09:25:51 PM »
Already been there, similar issue as looking at the fiche at the dealer. Not enough fine detail to identify the item I need.

 :blu13 i think they are the 3 clips that hold the mirror housing on Yes/No??  :think1 :blu13left

Yep I'm after the 6 clips (3 on each side) that fit inside the plastic that the mirror covers push into, the ones on mine have a Phillips screw in the middle. These have four fingers that the ball on the mirror pushes into, I've used double sided tape short term. hopefully I can get replacements or might have to chase them up from a wreck.

Keith
02 Ex Police ST1100
05 ST1300
 

Offline Draco (Heartbreak Kid)

  • Rob Married Ros 14/09/2019
  • Legendary Member
  • *****
  • Posts: 656
  • Thanked: 412 times
  • White Phoenix
Re: Mirror Cover Retaining Clips
« Reply #8 on: April 30, 2016, 09:28:53 PM »
 :blu13 YES then definitely #7 the plastic on the mirror housing clip into them :like hope this helps  :blu13left
CHEERS
DRACO :)

Honda MT250 Elsinore, Honda 750 four F1
Kawasaki Z650, Kawasaki Z1R Mk ll (mint green)
FJ1200 Yamaha 1995, Kawasaki Z1100
Kawasaki Z1000, FJ1200 Yamaha 1995
FJ1200 Yamaha 1992, FJR1300 Yamaha 2004
ST1300 Honda 2004, FJ1200 Yamaha 1990


My next ride:2015 ST1300P
White Phoenix
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 13654
  • Thanked: 2046 times
  • Bridgeman Downs, Brisbane
Re: Mirror Cover Retaining Clips
« Reply #9 on: April 30, 2016, 10:59:11 PM »
These are spring clips that surround the metal teeth.  Without them the metal teeth aren't strong enough.
You want item #20.
Been there, done that.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Brian

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1672
  • Thanked: 296 times
  • ST Immortal
Re: Mirror Cover Retaining Clips
« Reply #10 on: May 01, 2016, 06:12:20 AM »
#7 is the spring clip
#15 is the screw that secures it to your fairing
I jus wanna ride my bike

09 ST1300 Charcoal Metallic (Grey GhoST)
09 ST1300 Candy Glory Red (Red MiST)
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5426
  • Thanked: 2020 times
  • Just Ridin'
Re: Mirror Cover Retaining Clips
« Reply #11 on: May 01, 2016, 07:40:17 AM »
http://www.bikebandit.com/oem-parts/2006-honda-st1300-abs-st1300a-upper-cowl/o/m2533sch414367





You may find what your looking for here

Number 7 is the part. They are very hard to fit, because there is a nut on the back of the front one from memory.

Diesel has had the nose paid off, so should be able to confirm.
Mine was fitted by the local dealership at a service.
Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline cravenhaven

  • Sr. Member
  • ****
  • Posts: 288
  • Thanked: 89 times
  • Coomba Bay, NSW
Re: Mirror Cover Retaining Clips
« Reply #12 on: May 01, 2016, 08:34:06 AM »
On my parts list item 7 is called "washer, mirror setting spring", though the picture indicates it also includes the screw (item 14).
 

Offline StinkyPete

  • Defected to a BMW
  • NR2016 Group
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 6316
  • Thanked: 2704 times
  • Blackwood, SA
Re: Mirror Cover Retaining Clips
« Reply #13 on: May 01, 2016, 08:38:43 AM »
Part 20 on the Fiche Parts Diagram will be needed as well.  That is the little round clip that tensions the four fingers.   I've lost and replaced a few of them over the years and keep a few spares.
IBA #59146    FarRider #834    OzLapper 2012 & 2019

Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 
The following users thanked this post: basadia

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #14 on: May 01, 2016, 08:46:37 AM »
I think I'm going to need the fingers as well as a number of mine are broken. Not a cheap item to replace, if the part I've ordered is correct they retail at $7 and there are 6 in total plus the retaining clips. Thats about $50-$60 for a full set, lucky I did not buy the BMW I was looking at, I'm sure the same sort of items from BMW would have set me back a second mortgage.
Keith
02 Ex Police ST1100
05 ST1300
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5426
  • Thanked: 2020 times
  • Just Ridin'
Re: Mirror Cover Retaining Clips
« Reply #15 on: May 01, 2016, 08:54:43 AM »
It is worth doing though. I replaced 3 of mine and never had a problem again.

Having said that, I do recommend cable tying the mirror cover to the body of the bike. Make it so that if knocked off l, the indicator wiring is not stretched.
The reason for cable tying is the occasional pedestrian bumping them in car parks or the odd small bird strike on the road. I even had a pressure wave from an oncoming truck loosen one.

Replacing it after it slides down the road is expensive.
Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5426
  • Thanked: 2020 times
  • Just Ridin'
Re: Mirror Cover Retaining Clips
« Reply #16 on: May 01, 2016, 08:55:06 AM »
I think I'm going to need the fingers as well as a number of mine are broken. Not a cheap item to replace, if the part I've ordered is correct they retail at $7 and there are 6 in total plus the retaining clips. Thats about $50-$60 for a full set, lucky I did not buy the BMW I was looking at, I'm sure the same sort of items from BMW would have set me back a second mortgage.
The washer is the fingers.
Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #17 on: May 01, 2016, 05:24:37 PM »
I think I'm going to need the fingers as well as a number of mine are broken. Not a cheap item to replace, if the part I've ordered is correct they retail at $7 and there are 6 in total plus the retaining clips. Thats about $50-$60 for a full set, lucky I did not buy the BMW I was looking at, I'm sure the same sort of items from BMW would have set me back a second mortgage.
The washer is the fingers.

So the way I'm reading the fiche is #7 includes both the screw (shame you cant order the fingers separate) and the fingers and #18 is retaining clip. I'll order one of both and hope that when they come in they are correct, the dealer has told me if I do the order this way he is happy to put them on his shelf if they are not correct.
Keith
02 Ex Police ST1100
05 ST1300
 

Offline cravenhaven

  • Sr. Member
  • ****
  • Posts: 288
  • Thanked: 89 times
  • Coomba Bay, NSW
Re: Mirror Cover Retaining Clips
« Reply #18 on: May 01, 2016, 05:43:40 PM »
#18 is a nut insert. You need 6 of #7 and 6 of #20.
ie 6* 88115-MT3-000
& 6 * 95002-02100
 
The following users thanked this post: basadia

Offline basadia

  • Full Member
  • ***
  • Posts: 152
  • Thanked: 12 times
  • ST Legend
Re: Mirror Cover Retaining Clips
« Reply #19 on: May 01, 2016, 06:20:33 PM »
#18 is a nut insert. You need 6 of #7 and 6 of #20.
ie 6* 88115-MT3-000
& 6 * 95002-02100


Are we looking at the same fiche?
Part #20 on my fiche found here:
http://www.bikebandit.com/oem-parts/2009-honda-st1300-st1300/o/m18411#sch611190
appears like this:
20: BOLT, FLANGE (6X20) 740127   96001-06020-00
Not the same part number you listed as above
The part listed as #18 lists as:
18: 025098-5 CLIP, TUBE (B10) 736555 95002-02100
Which is the same part you listed. Your part # above is the correct Honda part number but not the same number listed in the fiche.
I'm confused as to why the fiche part # are different.
I now do know the correct Honda part # so I can now go to the dealership and be confident that the order will be correct.
Thanks everyone for your feedback.

Keith
Keith
02 Ex Police ST1100
05 ST1300
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Mirror Cover Retaining Clips
« Reply #20 on: May 01, 2016, 06:47:07 PM »
Looking at the parts list here http://www.partzilla.com/parts/search/Honda/Motorcycle/2006/ST1300PA%20A/UPPER%20COWL/parts.html you would only need to order Item seven as that is a set. The only items that need 6 of are items 7 (88115-MT3-000), 16 (93500-05012-0A) and 19 (94050-05000)

The diagram shows item (7 & 16) and a line pointing to a location. It also shows an item 19 line going to the other side so you would also need to order those.



« Last Edit: May 26, 2019, 02:30:39 PM by alans1100 »
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: Mirror Cover Retaining Clips
« Reply #21 on: May 01, 2016, 06:56:32 PM »
I Looked at the Police version but the part numbers are the same so item 19 is 18 and item 16 is 15 in the other models

You can get the straps as well part number 90650-MA6-720 x2 and two screws 93903-22320 if they're missing
« Last Edit: May 01, 2016, 07:00:45 PM by alans1100 »
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 13654
  • Thanked: 2046 times
  • Bridgeman Downs, Brisbane
Re: Mirror Cover Retaining Clips
« Reply #22 on: May 01, 2016, 09:06:26 PM »
You can get the straps as well part number 90650-MA6-720 x2 and two screws 93903-22320 if they're missing

Any suitable sized tie wrap does the job just as well as a Honda $$$ one.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline cravenhaven

  • Sr. Member
  • ****
  • Posts: 288
  • Thanked: 89 times
  • Coomba Bay, NSW
Re: Mirror Cover Retaining Clips
« Reply #23 on: May 01, 2016, 09:58:03 PM »


Are we looking at the same fiche?
Part #20 on my fiche found here:
http://www.bikebandit.com/oem-parts/2009-honda-st1300-st1300/o/m18411#sch611190
appears like this:
20: BOLT, FLANGE (6X20) 740127   96001-06020-00
Not the same part number you listed as above
The part listed as #18 lists as:
18: 025098-5 CLIP, TUBE (B10) 736555 95002-02100
Which is the same part you listed. Your part # above is the correct Honda part number but not the same number listed in the fiche.
I'm confused as to why the fiche part # are different.
I now do know the correct Honda part # so I can now go to the dealership and be confident that the order will be correct.
Thanks everyone for your feedback.

Keith


Ahh!! sorry. I was looking at my own pdf parts list and compared it to the bluecity honda parts list. As you say the part numbers are correct, but the item numbers are different for each version of the parts list.
Allan
 

Offline tj189

  • Supreme "2000" Club Member
  • *****
  • Posts: 2131
  • Thanked: 150 times
  • Brisbane
Re: Mirror Cover Retaining Clips
« Reply #24 on: May 01, 2016, 10:03:51 PM »
http://www.bikebandit.com/oem-parts/2006-honda-st1300-abs-st1300a-upper-cowl/o/m2533sch414367

You may find what your looking for here


#7, #15 and #20  in the fiche quoted above and the qty = as many as are broken
IBA #38035
FarRider #189
Ulysses #42456