Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33196 times)

alans1100 · « **Reply #50 on:** October 27, 2014, 04:41:30 PM »

Quote from: Tipsy on October 27, 2014, 05:51:27 AM

py

also on the front right lower fork there is an assembly at the bottom where the brake caliper bolts on
http://www.st-1100.com/st1100-parts-fiche-front-fork-st1100py.html
I require the complete assembly that bolts onto the side of the fork please.

Tipsy

I think you mean the anti-dive unit which on yours would be the lower LH fork. There's a spring inside that unit which is under compression so take care in removing it. Not sure if it would fit as the ABS has a different part number.

Item 39 http://www.st-1100.com/st1100-parts-fiche-front-fork-st1100a1.html

Tipsy · « **Reply #51 on:** October 28, 2014, 06:30:12 AM »

py
I can check it out mate as I want to extend or have an extra brake pedal forward on my h/way peg.
as for the antidive unit I only need the 2 outside parts /rubber sleeve and piston, but happy to take it all.
numbers may differ but parts look the same.
Tipsy

pm sent

Shaun · « **Reply #52 on:** October 28, 2014, 04:27:52 PM »

Tipsy:
Sorry, but I have discarded the rear brake pedal and assembly. I noticed a small crack in the pedal and in the metal section it attached to, and thought it prudent that I chuck it.

Cheers,

Greencan · « **Reply #53 on:** October 28, 2014, 06:55:39 PM »

Evenin' Shaun...

Sorry bout the delay in getting back to you re: rear wheel and final drive, the owner of the bike I'm working on has decided to buy relacements parts and I have decided to take the challenge and machine off the damaged wheel flange and fit a replacement collar.

Thank you nonetheless for making the effort and sending my the photos.

Regards, Dick :-)

Shaun · « **Reply #54 on:** October 28, 2014, 07:07:05 PM »

Hey, no problems!

I needed to get all that kit off to start getting at the alternator anyway.

I just need to figure out the rest now :P

Shaun · « **Reply #55 on:** November 23, 2014, 06:59:31 AM »

I am now at the point where I want to move the rest of the bike on.

I know some of you have been interested in the meatier parts of the bike, such as the alternator, engine, swing arm, wheels and frame, and these are now up for grabs.

I will give you all first right of refusal before I put the rest up on eBay. :)

Cheers, Shaun

Aj1300 · « **Reply #56 on:** November 24, 2014, 01:22:54 PM »

Shaun,
Let me know how much you want for the frame
Cheers Adam

Tokhi · « **Reply #57 on:** November 29, 2014, 12:58:24 AM »

Hi Shaun,
What condition are the splines/final drive like and how much?

Cheers

Tokhi

Shaun · « **Reply #58 on:** November 29, 2014, 08:51:27 AM »

AJ1300:
I am not sure what to ask for the frame, eBay and used/new prices online are incredibly variable. I really don't want to rip anyone off. That said, all this is going into paying myself off for the new bike, so I don't want to rip myself off either! Something at the low end of what others are asking is fine by me. It is slow work getting to the point where I have a frame sitting there ready to go. I lack some confidence at pulling things apart this far into the bike so work is very slow.

Tokhi:
The splines look ok, not a great deal of wear on them, they were nicely lubed when I pulled them apart so the last person to have it off seems to have known what they were doing. I have some photos somewhere which I will get up soon. The ride was very smooth prior to the bingle, so everything was working ok. I really miss the shaft drive. Again, it is slow work getting these things off as I am being quite careful, due to my ignorance of the workings this far into the bike.

Cheers, Shaun

Garry_Coates · « **Reply #59 on:** December 15, 2014, 07:14:41 AM »

HI Shaun,
would you still have the cartridge fork internals available? I assume that is the LHS for late model (not anti-dive side). I want all parts other than the spring.

Regards
Garry

Shaun · « **Reply #60 on:** December 30, 2014, 08:51:19 PM »

Afraid not, sorry.

Shaun · « **Reply #61 on:** December 30, 2014, 09:28:19 PM »

Rear is a Metzeler Roadtech Z6.

Front rim has a small dent but tyre has continued to maintain pressure since the accident.

(In response to a post which subsequently was deleted (?) )

Jglan10 (Onesie) · « **Reply #62 on:** December 31, 2014, 12:48:31 PM »

How many km on engine and what price are you looking for thanks Shaun

Shaun · « **Reply #63 on:** December 31, 2014, 01:51:22 PM »

104k, and was faultless in performance. 2001 model.

As for price, no real guidance online. There are, however, several interested parties.

Piet · « **Reply #64 on:** January 15, 2015, 03:19:27 PM »

Hi Shaun,
1. Is the headlight still available? How much?
2. Do you intend selling the tires with the rims or are you willing to sell just the tires?
3. If so what would you want for the Metzelers front & back?
Piet

Shaun · « **Reply #65 on:** January 15, 2015, 05:52:03 PM »

Quote from: Piet on January 15, 2015, 03:19:27 PM

Hi Shaun,
1. Is the headlight still available? How much?
2. Do you intend selling the tires with the rims or are you willing to sell just the tires?
3. If so what would you want for the Metzelers front & back?
Piet

If you mean the headlight assembly, then no. I salvaged the headlight lamps though, lol

I am happy to sell just the tyres. I would have to go to a tyre place to get them off but that's not really much of a problem.

I have a larger problem of some people wanting the frame, others wanting the engine, and me not really knowing how to get one off from the other. :)

David Mckenzie · « **Reply #66 on:** January 15, 2015, 09:49:44 PM »

Hi Shaun,
I am not sure if I am doing this right but here goes.
Do you have the left hand side mirror cowl (cover) and maybe the right hand side air intake hose that runs down to the motor

Piet · « **Reply #67 on:** January 16, 2015, 06:46:39 PM »

Hi Shaun, Thanks for letting me know. I was after the headlight itself as opposed to the bulbs. What do you want for the tires?

Shaun · « **Reply #68 on:** January 16, 2015, 07:02:29 PM »

David: No, sorry I have neither of those items any more. They went quite a while ago. it seems a lot of people seem to be losing mirror housings :)

Piet: I will PM you.

Shaun · « **Reply #69 on:** January 19, 2015, 03:46:15 PM »

By way of update:

Things gone so far:
- rear shock
- footrest pads
- LH pannier
- LH mirror
- lowered seat
- stock toolkit
- top box
- staintune pipes
- tank bag and tank cover
- HW pegs
- stock pipes
- 2x side fairings
- tank cover plastic
- GPS speedometer
- handlebar ends
- gear indicator
- air hose vent
- rear ABS sensor
- front ABS sensor
- handlebar risers
- radiator
- chromed side stand
- rear wheel and tyre
- front wheel and tyre

Soon to be gone (auctions or negotiated):
- left hand cowling + pocket (still waiting on confirmation, Grumpy?)
- frame
- left handlebar switch housing assembly

No good (disposed of)
- right hand side flare/peg mounts (crack)
- front right left tupperware
- right mirror and housing
- front forks

Large scale - still up for grabs
- alternator
- final drive
- engine (have had some enquiries but nothing confirmed)

RubenCan · « **Reply #70 on:** January 19, 2015, 07:05:18 PM »

Hi Shaun,
Just following up our chat from yetserday. Do you still have the left switch block (blinkers/horn) and how much would you be looking at for the unit?

Thanks

Ruben

Shaun · « **Reply #71 on:** January 19, 2015, 08:11:35 PM »

Ruben:

I will open it up to check its condition, but yeah it is a Honda replacement part because the original went all crappy inside.

I will pm once I have had a look.

BIKERJIMBOB · « **Reply #72 on:** January 21, 2015, 07:14:08 AM »

Hi Shaun,
Would you still have the bracket assembly that holds the right hand side pannier on ? if so how much would you want for it ? also the spring that holds the pannier flap open or closed.
Cheers Jim
0423151073

Shaun · « **Reply #73 on:** January 21, 2015, 09:25:30 AM »

Hey Bikerjimbob

Do you mean these brackets? If so, yep have the right hand one. Like all my metally bits, the clasp is chromed. What can I say...I like shiny things :)

I am not sure what you mean by "the spring that holds the pannier flap open or closed"

BIKERJIMBOB · « **Reply #74 on:** January 21, 2015, 12:35:21 PM »

Hi Shaun,
That's the bit I need how much are they ? Don't worry about the spring they are only three dollars from honda. I am in Kincumber near Gosford where about are you ?
Cheers Jim

News:

Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33196 times)