Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33325 times)

Shaun · « **Reply #75 on:** January 21, 2015, 08:25:03 PM »

PM sent

Piet · « **Reply #76 on:** February 20, 2015, 10:58:33 AM »

Hi Shaun,

Do you still have the large 70A? fuse available?
Please see this ebay link for the item I am chasing?
http://www.ebay.com.au/itm/331354705665?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I hope the link works. If so please let me know. Mine has the base of the fuse holder cracked.
Thanks Piet.

muf · « **Reply #77 on:** February 20, 2015, 01:44:43 PM »

Received your message Shaun relating to spare parts, mate, my ST1100 project has now been completed, including a color matching trailer, the only items I need to purchase are the two front crash bar covers, boy that cycle sure does look sad in the photo, Regards

Shaun · « **Reply #78 on:** February 21, 2015, 08:32:31 AM »

Piet: I will have a look this afternoon and pass it along if I locate it and it's in good nick.

Muf: Yeah, it's looked better, that's for sure.

Shaun · « **Reply #79 on:** February 21, 2015, 02:46:37 PM »

Piet: got it off no problems. It's in good order.

Tully · « **Reply #80 on:** February 21, 2015, 07:36:41 PM »

Hi Shaun, do you still have the bar ends?
Cheers
Tully

Shaun · « **Reply #81 on:** February 21, 2015, 07:45:12 PM »

Tully: Afraid not, they went a while ago.

Shaun · « **Reply #82 on:** February 21, 2015, 07:49:34 PM »

Another update as a few bits and pieces have moved on:

Things gone so far:
- rear shock
- footrest pads
- LH pannier
- LH mirror
- lowered seat
- stock toolkit
- top box
- staintune pipes
- tank bag and tank cover
- HW pegs
- stock pipes
- 2x side fairings
- tank cover plastic
- GPS speedometer
- handlebar ends
- gear indicator
- air hose vent
- rear ABS sensor
- front ABS sensor
- handlebar risers
- radiator
- chromed side stand
- rear wheel and tyre
- front wheel and tyre
- 70A block fuse assembly
- left and right pannier brackets and latches
- rad guard radiator cover
- instrument panel covering and perspex/gasket

Soon to be gone (auctions or negotiated):
- frame
- Oxford heated grips

No good (disposed of)
- right hand side flare/peg mounts (crack)
- front right left tupperware
- right mirror and housing
- front forks
- front crash bar covers

Large scale - still up for grabs
- alternator
- final drive
- engine (have had some enquiries but nothing confirmed)

Anything not mentioned here I probably still have.

alans1100 · « **Reply #83 on:** February 21, 2015, 08:16:51 PM »

Shaun

Do you still have the black plastic that surrounds the gauges and the clear plastic gauge cover which is part of the instrument cluster.

You can see the heat damage to mine below the temp gauge which happened while I was living in at Port Hedland and Karratha...

Mileageat03-01-2012 by Alan, on Flickr

Shaun · « **Reply #84 on:** February 21, 2015, 08:30:56 PM »

My goodness. Must have been a hot one.

Once I get back from the RTE tomorrow at Brooklyn, I will have a look to see what condition it's in.

Tully · « **Reply #85 on:** February 21, 2015, 09:43:54 PM »

Thanks anyway Shaun. Sorry I read an early list. Lol
Cheers
Tully

Shaun · « **Reply #86 on:** February 23, 2015, 06:32:34 PM »

Alan: I have exposed the black cover and perspex shielding but I can't for the life of me see how to get the thing off. There are no obvious bolts. It is in good shape, but I would hate to damage it by removing it stupidly.

I will take my time removing it, so I hope you aren't in a mad rush :)

alans1100 · « **Reply #87 on:** February 23, 2015, 07:04:59 PM »

Not in a rush Shaun.....

I think you need to remove the instrument cluster before it is able to be separated..........

Looks like four bolt points.......in the photo I took of mine a couple years ago. One each side up top, one down next to clock and one near the headlight adjuster.

Shaun · « **Reply #88 on:** February 24, 2015, 05:44:56 PM »

Alan:
I was able to get the instrument cover and perspex off, and was also able to retain the rubber gasket that lines it. If your cover suffered heat damage then it may be a good idea to swap that gasket over too.

Let me know if it suits.

PS, the stuff on the RHS of the cover is just velcro, I had it there to hold a thermometer. :)

Shaun · « **Reply #89 on:** March 07, 2015, 05:28:17 AM »

Few more vultures, a few more updates. Blondeambition, I am unable to confirm or deny that Flash was involved in any of the following transactions. :D

Things gone so far:
- rear shock
- footrest pads
- LH pannier
- LH mirror
- lowered seat
- stock toolkit
- top box
- staintune pipes
- tank bag and tank cover
- HW pegs
- stock pipes
- 2x side fairings
- tank cover plastic
- GPS speedometer
- handlebar ends
- gear indicator
- air hose vent
- rear ABS sensor
- front ABS sensor
- handlebar risers
- radiator
- chromed side stand
- rear wheel and tyre
- front wheel and tyre
- 70A block fuse assembly
- left and right pannier brackets and latches
- rad guard radiator cover
- instrument panel covering and perspex/gasket
- radiator fan

Soon to be gone (auctions or negotiated):
- frame
- Oxford heated grips
- Right hand switch block

No good (disposed of)
- right hand side flare/peg mounts (crack)
- front right left tupperware
- right mirror and housing
- front forks
- front crash bar covers

Large scale - still up for grabs
- alternator
- final drive
- engine (have had some enquiries but nothing confirmed)

Flash · « **Reply #90 on:** March 11, 2015, 09:06:04 PM »

Bahahaha!
I only continue to buy things to uphold my reputation as head vulture.

blonde ambition · « **Reply #91 on:** March 11, 2015, 09:08:13 PM »

Shaun I can in no way confirm if I will be picking up some sort of package on the door step soon with some sort of switch in it. Haha

Col · « **Reply #92 on:** April 10, 2015, 05:46:28 PM »

Gidday, thinking of removing my fairing lowers to give more leg room but don't want to cut my grey fairing panels because I'll restore it when I sell it. Do you have the grey panels that run from the cubbies down the back of the fairing? Don't need to be perfect, don't need lids. Col, palmwoods, 0403 034 334

Jglan10 (Onesie) · « **Reply #93 on:** April 10, 2015, 05:53:49 PM »

Do you still have the voltage regulator

Shaun · « **Reply #94 on:** April 11, 2015, 10:37:43 AM »

Flash: I have the switch off. I had to cut the cabling to the red harness to get it out due to some rather nasty tangling heading into the frame. The switch block itself is intact and looking good. I also have the rest of the wire harness and it won't be that hard to reconnect. Let me know if you are still interested.

cojomo: Yes, still have both. PM me please :)

Jglan10: Possibly. Where do I find that guy, then? :)

Jglan10 (Onesie) · « **Reply #95 on:** April 13, 2015, 06:28:35 PM »

Beside the battery

Flash · « **Reply #96 on:** April 16, 2015, 10:39:09 PM »

Hi Shaun. Definitely still want it.
Do you still have the left hand peg mount?

Shaun · « **Reply #97 on:** April 17, 2015, 08:21:53 AM »

Jglan10: Sorry, that piece is gone.

Flash: No problem, I will put the switch block and cabling to one side for you. I will also have a sift through to see whether I have the left hand peg mount.

Jglan10 (Onesie) · « **Reply #98 on:** April 17, 2015, 11:13:01 PM »

Do you have the abs system still

Brock · « **Reply #99 on:** April 18, 2015, 01:48:45 PM »

Shaun,

Do you have the clutch assembly still on the engine, Kevin Murphy may have need of the parts...

http://ozstoc.com/index.php?topic=9202.msg107742;topicseen#new

News:

Author Topic: Wrecking my baby, bit by bit. Blue ST1100 ABS 2001 (Read 33325 times)