Author Topic: Location and access to HISS programming port what Tupperware to remove  (Read 989 times)

Offline Mark WA

  • Newbie
  • *
  • Posts: 5
  • Thanked: 2 times
  • ST Legend
I recently found my self in need of new set of keys (long story short - someone tried to steal the bike busted up their tool and part of the lock which caused my last key to crack... it still works but paranoid about it snapping)

As this is the last spare keys on the HISS I have spoken to Garage Vert ( bike electrical workshop that is sort of kind of local)  who has quoted me a reasonable cost (compared to local Honda dealers) to reset the HISS for new keys. 
However, understandably,  he's going to charge time for removing and replacing what ever Tupperware is needed to get to the HISS programming port...
as such I'm trying to find out where access  is so I can do the fairing work  while he works on other people's bikes (and svae myself a couple hundred dollars

I guess it's somewhere under the upper tank or near the radiator but I've heard there is access to it under the seat (passanger seet right side)... but googling gives mostly stuff for HISS key programming access for VFR and other bikes.
any help greatly appreciated
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
The key can be programmed using a connector under the seat, no platic removal needed. A couple of guys in Joondalup Ulysses have the cable, and know how to do it. All you need is the right key available from ebay..

I'm sure the guys would help you at no charge..
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline Mark WA

  • Newbie
  • *
  • Posts: 5
  • Thanked: 2 times
  • ST Legend
OK that's good news - so basically do I I just need new blank keys cut keys (I'm pretty sure the HISS unit is at the end of its number of keys) I also understand that the current key transponder can be removed and put in a new key but I only have a single key left at the moment
 

Offline ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School


        2005 Honda ST1300A
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
You can get new keys with the transponder chip in them, then with the adapter cable plugged in there is a sequence to follow to program them.

I am going to get hold of a cable so I can make one or two of them. it shouldnt be difficult.

The hard part is getting the keys at a good price.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline West Aussie Glen

  • old fart
  • Supreme "2000" Club Member
  • *****
  • Posts: 3154
  • Thanked: 839 times
  • Willetton, Perth
Check out the attached.
Fairly sure there is far amount of info on this forum.
Remember you only need to top part of the key to operate the HISS.
« Last Edit: November 13, 2023, 07:27:23 PM by West Aussie Glen »
Glen
Sold
1948 James 98cc 2 Speed, 1969 Suzuki A100-2
1970 Suzuki T250 Hustler, Honda CL100
Yamaha RD250C, 1985 Kawasaki GPZ250
BMW K75S, 78 Yamaha XS11
Yamaha Royal Star Tour Deluxe, 88 GL1500
99 SE GL1500
In the shed
85 Kawasaki LTD250
88 GL1500 Outfit
08 ST1300
2013 GL1800
2013 GL1800 Outfit
 

Offline West Aussie Glen

  • old fart
  • Supreme "2000" Club Member
  • *****
  • Posts: 3154
  • Thanked: 839 times
  • Willetton, Perth
THis is in the 1100 section, I assume you have a 1300.
Mr Brock can move ot to the 1300 section for you.
Glen
Sold
1948 James 98cc 2 Speed, 1969 Suzuki A100-2
1970 Suzuki T250 Hustler, Honda CL100
Yamaha RD250C, 1985 Kawasaki GPZ250
BMW K75S, 78 Yamaha XS11
Yamaha Royal Star Tour Deluxe, 88 GL1500
99 SE GL1500
In the shed
85 Kawasaki LTD250
88 GL1500 Outfit
08 ST1300
2013 GL1800
2013 GL1800 Outfit
 

Offline West Aussie Glen

  • old fart
  • Supreme "2000" Club Member
  • *****
  • Posts: 3154
  • Thanked: 839 times
  • Willetton, Perth
Mark you will find the attached useful when removing the tupperware. I also have a 1300 at home with no tupperware on it.
« Last Edit: May 15, 2022, 09:13:54 PM by West Aussie Glen »
Glen
Sold
1948 James 98cc 2 Speed, 1969 Suzuki A100-2
1970 Suzuki T250 Hustler, Honda CL100
Yamaha RD250C, 1985 Kawasaki GPZ250
BMW K75S, 78 Yamaha XS11
Yamaha Royal Star Tour Deluxe, 88 GL1500
99 SE GL1500
In the shed
85 Kawasaki LTD250
88 GL1500 Outfit
08 ST1300
2013 GL1800
2013 GL1800 Outfit
 

Offline Yorkie

  • Pit Crew & Recovery Specialist
  • NR2016 Group
  • Legendary "1000 Club" Member
  • *
  • Posts: 1374
  • Thanked: 202 times
  • ST Legend
for my NT650 I ordered blank from hondashop, $25 I think, had it cut at locksmith, another $15, took bike with both keys to Hondashop who charged $65 to program.
Brian 0418937173
Manager York Motor Museum

In the shed
1999 ST1100A
1971 CB750K2
1980 XV750
1977 GL1000
FR#720
CMRCWA #133
York,WA

So at what age does this "old enough to know better" kick in?
I believe in the "hereafter", every time I go to the shed I have to think "what am I here after"
 

Offline Mark WA

  • Newbie
  • *
  • Posts: 5
  • Thanked: 2 times
  • ST Legend
OK that sort of worked out far better than expected... last night while in the process packing up to move house I found my spare key.
Yah but still need a spare key...
Fortunately Gararge Vert  simply took the damaged key's transponder and put it in a new blank key, no HISS programming needed so the $300 quote turned out to cost $60....

and now on to the next fix... front fork seals
 
The following users thanked this post: ruSTynutz