Author Topic: Homemade Radiator Guard  (Read 8312 times)

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Homemade Radiator Guard
« on: January 05, 2013, 05:03:19 PM »
Hope all are well and have not melted away from the extreme heatwave! :H Just wanted to share a homemade farkel.

While inspecting the fins of the radiator, I noted quite a few stone injuries due to its position (low and central) as well as the front fender being quite short in the rear section....
 
I started searching for radiator guards and they are available starting at $140 and upwards which I feel is ridikawaka for what it is.... :o
 
So in the great spirit of tight-ass-ness,  :butt   just wanted to share with you a new farkel I just completed today for my bike.
 
I purchased the flat aluminum at Bunning's for $5.00, the universal radiator mesh was $12.00 at Repco and the rest was a bit of time and fun.
 
see pix attached, it actually looks better in the flesh than in the photos, and considering the price, not bad at all!

measurements are O.D. 390 mm x 225 mm, clear silcone RTV and 5mm rivets used.

cheers :13Candy
« Last Edit: January 05, 2013, 10:33:52 PM by zevk »
Zev
 

Turtle

  • Guest
Re: Homemade Radiator Guard
« Reply #1 on: January 05, 2013, 06:02:03 PM »
Great work looks the goods :thumb
 

Offline Whizz

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1833
  • Thanked: 7 times
  • Paul. Ipswich, QLD.
    • Instrumented Control Solutions Pty Ltd
Re: Homemade Radiator Guard
« Reply #2 on: January 05, 2013, 06:07:20 PM »
Mate, never mind 'in the flesh', it looks pretty good in the photos!!

Nice job, well done!.

 :-++ :-++
Cheers,
Paul
:13Candy
In theory there is no difference between theory and practice; in practice there is!!
Red, 2004, ST 1300A
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #3 on: January 05, 2013, 08:32:44 PM »
thanks turtle n whizz, glad u liked it! :runyay
Zev
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8714
  • Thanked: 1692 times
  • White is the fastest
Re: Homemade Radiator Guard
« Reply #4 on: January 05, 2013, 09:14:00 PM »
Looks Good, and has given me an idea for another project, where I can practice ally welding maybe.
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline tj189

  • Supreme "2000" Club Member
  • *****
  • Posts: 2131
  • Thanked: 150 times
  • Brisbane
Re: Homemade Radiator Guard
« Reply #5 on: January 05, 2013, 10:09:05 PM »
Great job there, welll done :thumbs
IBA #38035
FarRider #189
Ulysses #42456
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Homemade Radiator Guard
« Reply #6 on: January 05, 2013, 10:32:51 PM »
Looks Great, when are you taking orders? and can I have mine in Black please?
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #7 on: January 05, 2013, 10:43:29 PM »
haha Sabie,

The old saying...

Give a man a fish, and you feed him for a day; show him how to catch fish, and you feed him for a lifetime!  :eat

(unless you dont like fish, then yer stuffed...)   :fp
Zev
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Homemade Radiator Guard
« Reply #8 on: January 05, 2013, 10:46:16 PM »
Whats this talk of fish???

You could have a little money earner here!!!

 :thumb
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #9 on: January 05, 2013, 10:51:10 PM »
hmm you may be right...
Zev
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Homemade Radiator Guard
« Reply #10 on: January 05, 2013, 10:53:55 PM »
You could call it the "Zev Screen"
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline saaz

  • Supreme "2000" Club Member
  • *****
  • Posts: 4542
  • Thanked: 41 times
  • Canberra ACT
Re: Homemade Radiator Guard
« Reply #11 on: January 06, 2013, 08:10:41 AM »
Well done. On the ST11 I put the mesh behind the plastic protector that is already there.
John
(Ridden on and forever in our hearts)
1996 Honda ST1100P
2014 Triumph Trophy SE
Ozstoc, STOC #7239, Farrider #461 Ulysses #061681, IBA #59143 and some others
 

Offline Abe

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1797
  • Thanked: 178 times
  • 4D Gang Member
Re: Homemade Radiator Guard
« Reply #12 on: January 06, 2013, 10:12:12 AM »
Very nice, looks professionally made.

Cheers
Dave
At my age " getting lucky" is remembering what I came in the room for ;)

:wht13      Cheers Dave
Member of the 4 D Gang
 

Offline Diesel

  • Administrator
  • Supreme "2000" Club Member
  • *****
  • Posts: 3936
  • Thanked: 793 times
  • QUEEEENSLANDER!!!!
    • The Review Guys
Re: Homemade Radiator Guard
« Reply #13 on: January 06, 2013, 02:19:42 PM »
LEGEND!!          :thumbsup


Cheers, Diesel
FarRider #416   IBA #55491  
OzSTOC Life Member
:candystwheelie       www.dieselst1300.blogspot.com.au
 

rjstorrie

  • Guest
Re: Homemade Radiator Guard
« Reply #14 on: January 06, 2013, 08:45:32 PM »
That looks absolutely awesome and I sooooo need one. I was pulling bits off my ST today and cleaning and saw the radiator has a LOT of flattened blades which might require replacing :(.

May have a crack at making one anyway, paint it black for a more suttle look.
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #15 on: January 06, 2013, 09:06:37 PM »
glad u liked it robjob and all who responded!  :hatwave

make sure you use high temp silicone rtv not the usual silictat, the one i used is rated to 240 c.

The mesh is available in other colors besides the chrome, I saw it in red, blue and black so you dont have to paint it at all!

If you want to paint the aluminum frame, you will probably need hi-temp primer coat for good adhesion as well as simmilar top coat which wouldbe more expensive than the hardware.... I'm sure it will look great whatever you decide.

I also have ordered a fenda-extenda to keep the grime away from the block and potentialy the radiator, its only $35.00 on flea-bay uk
Zev
 

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Homemade Radiator Guard
« Reply #16 on: January 07, 2013, 08:31:35 AM »
Awesome work Zev :thumb it looks amazing :-++

Thanks for sharing :thumbs
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline sac468

  • Full Member
  • ***
  • Posts: 166
  • Thanked: 4 times
  • Canberra ACT
Re: Homemade Radiator Guard
« Reply #17 on: January 08, 2013, 09:27:10 AM »
 :thumbs If you decide to make and sell them, put me down for one. :rd13
Shane
Ride to live, Live to Ride
Ulysses; 51798
 

Offline gaz

  • The dark knight! The vigilante! The caped-crusader!
  • Legendary "1000 Club" Member
  • *****
  • Posts: 1032
  • Thanked: 84 times
  • Then be The Batman
Re: Homemade Radiator Guard
« Reply #18 on: January 08, 2013, 03:37:07 PM »
Looks Great, when are you taking orders? and can I have mine in Black please?
Red is Best?  :rd13
Taking over one emoticon at a time >:D
 

rjstorrie

  • Guest
Re: Homemade Radiator Guard
« Reply #19 on: January 09, 2013, 08:40:43 AM »
OMG Zevk, check this site out, I think you hit a WINNER with the costing to make one. I found it while looking for a source for a new radiator.

http://www.radguard.com.au/honda-st1300-abs-2002-2011-radiator-guard/
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #20 on: January 09, 2013, 07:14:34 PM »
thanks RobJob. for what it is, I think the homemade one is just great!
Zev
 

Offline Sabie

  • Riding a Blue Angel
  • Supreme "2000" Club Member
  • *****
  • Posts: 2757
  • Thanked: 194 times
Re: Homemade Radiator Guard
« Reply #21 on: January 09, 2013, 10:56:06 PM »
I think it looks better Zev.....
(Sabie pronounced Sab bee)

2004 Honda ST1300 Blue (Current)
2007 Yamaha VStar XVS 650 Classic (Current)
2011 Suzuki Boulevard C50T VL 800
2007 Yamaha XV 250 Virago
1980 CX500 Red
1980 CX500 Black
1979 CX500 Blue
1981 Honda XL 500s
1982 Yamaha XZ 550
1981 Honda XL 250s
1974 Honda Elsinore MT 250
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #22 on: January 10, 2013, 06:58:29 AM »
Thanks!  :-++
Zev
 

rjstorrie

  • Guest
Re: Homemade Radiator Guard
« Reply #23 on: January 27, 2013, 11:55:19 PM »
well Zevk gave me the inspiration to make the radiator guard, well it's "a work in progress" atm... but here's the photo's.

The parts:


The painting:


The cutting and bending:


The mess and glued product is currently not photographed but it's happily drying until tomorrow where I'll drill and pop rivet the bracket on and the frames together to secure it all a bit tighter.

Rob.
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: Homemade Radiator Guard
« Reply #24 on: January 28, 2013, 06:35:00 AM »
Hi Rob!
 
Glad I could provide the inspiration...

Just a constructive (intended pun) comment...you may find, that the black spray paint, will not adhere to the aluminium strips and mesh without a primer coat firstly...so try it on a scrap bit before you apply to the finnished product. Also did you know the mesh is available in black, blue, red and green?

looks great so far!  :thumbs

good luck

Zev