Author Topic: Looking for a full seat for ST1300 to convert from Single PA model  (Read 2352 times)

Offline perthcarpetcleaner

  • Full Member
  • ***
  • Posts: 112
  • Thanked: 25 times
  • Love to ride Long Distance FR#1089 IBA #69572
    • Stuart emery
Any one have a standard St1300 seat they are willing to part with. I am in Perth WA but happy to transport from East if needed.
Can be reached on  0451 667 405
Thanks In advance
Stuart
Love to ride Long Distance   FR#1089   IBA #69572

Current Garage
CBF900
ST1300 PA
GL1800

perthcarpetcleaner@gmail.com
0451667405
 

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #1 on: March 28, 2019, 02:03:47 PM »
I have a front & rear pair in very good condition (replaced with a Russell Daylong combo when six months old) for an ST1300, located in St Helena, Melbourne.   Will be away for a few weeks from Saturday afternoon, won't have time to sort anything out until Easter.  If nothing else surfaces, and you can wait until then, let me know.

Price?  Going rate on eBay seems to be around $350 the pair, I'd be happy with $250.
Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better
 
The following users thanked this post: perthcarpetcleaner

Offline CallMeSteve

  • Steve, Ruth and STrudel
  • Legendary Member
  • *****
  • Posts: 828
  • Thanked: 470 times
  • Eatons Hill, Brisbane.
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #2 on: March 28, 2019, 03:08:12 PM »
I have a front & rear pair in very good condition (replaced with a Russell Daylong combo when six months old) for an ST1300, located in St Helena, Melbourne.   Will be away for a few weeks from Saturday afternoon, won't have time to sort anything out until Easter.  If nothing else surfaces, and you can wait until then, let me know.

Price?  Going rate on eBay seems to be around $350 the pair, I'd be happy with $250.

Just curious... when you got the DayLong did you purchase a new seat in the US rather than send yours over?  I'm just wondering how well that strategy works out in practice.
A man rides on his STeed, says “Why am I short of attention? Got a short little span of attention”.

You can call me Steve, with apologies to Paul Simon.

 :wht13

current:
ST1300 2014 Police

pre-kids:
CX500
CB900
CB400NB
CB350
1964 Yamaha YG-1 80cc

IBA #76608,  FR #1170
 

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #3 on: March 28, 2019, 03:24:30 PM »
Just curious... when you got the DayLong did you purchase a new seat in the US rather than send yours over?  I'm just wondering how well that strategy works out in practice. 

I purchased the RDL from someone in Adelaide (from memory).  The seller shipped it to me, I swapped it with the OEM, OEM when into a box which sits on the top of an old wardrobe in the garage. (Which prompts me to think I better check inside the box and make sure that everything is okay.)

A few others on the Forum shipped their seats to the USA, had 'em modified and returned.  I'll leave it to them to put their hand up and tell their story.
Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better
 
The following users thanked this post: CallMeSteve

Offline perthcarpetcleaner

  • Full Member
  • ***
  • Posts: 112
  • Thanked: 25 times
  • Love to ride Long Distance FR#1089 IBA #69572
    • Stuart emery
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #4 on: March 28, 2019, 08:05:34 PM »
Consider it sold.  Not in a hurry so that will suit just fine. Am planning to be in Melbourne just after easter so could pick up from you around then if that suits.
Love to ride Long Distance   FR#1089   IBA #69572

Current Garage
CBF900
ST1300 PA
GL1800

perthcarpetcleaner@gmail.com
0451667405
 
The following users thanked this post: Williamson

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #5 on: March 28, 2019, 08:14:22 PM »
Consider it sold.  Not in a hurry so that will suit just fine. Am planning to be in Melbourne just after easter so could pick up from you around then if that suits.

Okey Dokey, I’ll dust it off, clean it up and get it ready for you - after Easter.  We can exchange mobile numbers via a PM, and make some arrangements.
Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better
 

Offline perthcarpetcleaner

  • Full Member
  • ***
  • Posts: 112
  • Thanked: 25 times
  • Love to ride Long Distance FR#1089 IBA #69572
    • Stuart emery
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #6 on: March 28, 2019, 08:49:36 PM »
sounds good


Sent from my SM-G610F using Tapatalk

Love to ride Long Distance   FR#1089   IBA #69572

Current Garage
CBF900
ST1300 PA
GL1800

perthcarpetcleaner@gmail.com
0451667405
 
The following users thanked this post: Williamson

Offline perthcarpetcleaner

  • Full Member
  • ***
  • Posts: 112
  • Thanked: 25 times
  • Love to ride Long Distance FR#1089 IBA #69572
    • Stuart emery
Re: Looking for a full seat for ST1300 to convert from Single PA model
« Reply #7 on: March 28, 2019, 08:50:39 PM »
yep that sound good
thank you
stuart

Sent from my SM-G610F using Tapatalk

Love to ride Long Distance   FR#1089   IBA #69572

Current Garage
CBF900
ST1300 PA
GL1800

perthcarpetcleaner@gmail.com
0451667405
 
The following users thanked this post: Williamson