Author Topic: clutch rattle  (Read 1482 times)

Offline ulster

  • Newbie
  • *
  • Posts: 1
  • ST Legend
clutch rattle
« on: November 18, 2018, 08:17:14 PM »
where is the bearing located in the ST1100 clutch that needs to be replace to stop clutch rattle
 

Offline alans1100

  • 1999 ST1100A
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6250
  • Thanked: 1161 times
  • Alan, Peterborough, SA
Re: clutch rattle
« Reply #1 on: November 18, 2018, 11:55:50 PM »
Hi and welcome aboard.

Item 21 and 22 here https://www.st-1100.com/st1100-parts-fiche-clutch-st1100ax.html

Before you go and rip the clutch out take note that the 1100 is normally a little noisy around the cutch area.

This is some of the posts on the subject from a few years ago. http://ozstoc.com/index.php?topic=7557.msg86789#msg86789
1999 :bl11  2004 :13Candy

FarRider #921- BR15, BR17, CR1

 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: clutch rattle
« Reply #2 on: November 19, 2018, 06:22:39 AM »
If You mean the groan when starting off in 1st while cold, then its normal. I have never heard a clutch rattle, my bike is at 180000Ks
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA