|
|
Cool :hatwave .......great work on the 20 % OzSTOC discount :clap :clap
So does the sealant residue present any issue come tyre change time ?? as in wheel clean up prior to new fitment etc ??
:beer
Diesel, Shiney and all that have used it
After 12 months of using Ride on. what are your thoughts of it now :popcorn
Diesel, Shiney and all that have used it
After 12 months of using Ride on. what are your thoughts of it now :popcorn
"Just for the record, I am only running this product in my rear tyre as the front one seems impervious."I reckon it nicely sets up the screw to penetrate the rear tyre! :|||| :crackup
Just wondering, Diesel. Wouldn't the front tyre run over the nail/screw/kangaroo bone first?
Diesel, Shiney and all that have used it
After 12 months of using Ride on. what are your thoughts of it now :popcorn
I am a fan Leo. Having pulled out the worms, plugs, slime compressor and other puncture repair implements on the side of the road many times, it's one of those things you wish you'd done in the first place, and still be happily (and obliviously) motoring along.
I certainly know that the vast majority of punctures occur in the tyres' last 15% of its life. This goo also balances the tyre (through centrifugal forces) which should also enhance mileage.
Brendan is our contact at Ride On and is as nice a bloke as you can meet. He will be seeing me again. ;-*"Just for the record, I am only running this product in my rear tyre as the front one seems impervious."I reckon it nicely sets up the screw to penetrate the rear tyre! :|||| :crackup
Just wondering, Diesel. Wouldn't the front tyre run over the nail/screw/kangaroo bone first?
Simple statistics Lionel.... 6 punctures: Front = 0 Rear = 6 :think1
I am sticking with the odds.
To all other posters in this thread - I can heartily recommend this product (even though I get no commission :|||| )
It's a funny thing that you don't even know when you have been saved - it works THAT efficiently. Shiney found 8 or so holes in one of his tyres when he changed it - and didn't know that he'd even run over anything!
For me - it is great peace of mind out in the never never, in the rain, at night, with that Wolf Creek guy following in his ute!
Hope this helps. :thumb
Cheers, Diesel
I still have not put mine in ..... Need a bit of tube to do but was not supplied and i had forgotten until now. Time to look for some tube .... lol
I got a flat rear tyre which had ride on tyre sealer in it
It was only a small hole which I couldn't find till I pumped air into it
The sealant was everywhere but didn't seal
I contacted Brendan who didn't care and just told me it doesn't always work
So much for after sale service :cuss
I have set up a deal with LSM Technologies to supply Members of OzSTOC with the Ride-On tyre puncture sealer and balancer.
[url]http://www.ride-on.com/[/url] ([url]http://www.ride-on.com/[/url])
[url]http://www.youtube.com/watch?v=4tQ6hFqifE8#t=0[/url] ([url]http://www.youtube.com/watch?v=4tQ6hFqifE8#t=0[/url]) Tire Sealant - Ride-On Tire Protection System (TPS) ([url]http://www.youtube.com/watch?v=2mid3XqDlyk#[/url])
very cool stuff :clap :rockon
This amazing product instantly fills a hole in your tyre from a nail or tack - before you even knew it happened, and provides extended tyre life through keeping the wheel constantly balanced and pressurised.
I am running it myself and can testify to how easy it is to add to your tyres.
Furthermore, our friend at LSM Technologies ([url]http://www.lsmtechnologies.com.au/index.cfm?go=ride-on[/url]), Brendan Villiers, has offered OzSTOC Members a very generous 20% discount! :clap :clap :clap
Email Brendan - tell him Diesel from OzSTOC sent you, and you can both work out the rest from there.... including how much product you will need, and how to use the easy online ordering, etc....
BDM Vehicle Safety Solutions
Brendan Villiers
Business Development Manager[/b]
Ph: +61 (0)7 3725 8100
Mob: +61 (0)427 580 066
Fax: +61 (0)7 3725 8199
brendan.villiers@lsmtechnologies.com.au ([url]http://ozstoc.com/brendan.villiers@lsmtechnologies.com.au[/url])
LSM Industries ([url]http://www.lsmtechnologies.com.au/index.cfm?go=ride-on[/url]) also do a great Tyre Pressure Monitoring System (TPMS) - check it out here...
[url]http://www.lsmtechnologies.com.au/index.cfm?go=doran[/url] ([url]http://www.lsmtechnologies.com.au/index.cfm?go=doran[/url])
Brendan is a very nice gentleman, and will help you out - whatever your needs.
Cheers, Diesel
The Stop n Go looks like the one to get :thumbs
Sent from my SM-N9005 using Tapatalk