The first thing I did was turn off the lamp, while I fix the problem.
Three days later , again low battery . I got a full charge and see that the battery is good. I rode again and all was well. Three days later, the same problem.
I measured voltage with the bike up , and accelerating voltage rises , but when measuring amps: zero amps ... !!!
The rectifier / regulator is hot ...
If the bike needs 16amp to run and the two lamps consume about 9amp , the system should not be able to withstand 25amp consumption?
Question: is it possible that the problem is that connecting the lamp has damaged the regulator, because it is this which does not support the consumption? in that case, there is a more powerful model for my rectifier?
Anyway, this afternoon will review the exact measurements of leakage , resistance, voltage and amperage according to Honda manual...
buffff!!!!