OzSTOC

Honda ST1300 Section => Electrics & Electronics - Volts, Amps and Fuses ST1300 => Topic started by: DBfive on June 27, 2017, 08:15:26 PM

Title: LED Globes in en existing indicator
Post by: DBfive on June 27, 2017, 08:15:26 PM
Has anyone tried LED replacement globes in front indicators?

I've seen Draco's running light replacement but wondered if there is a suitable replacement the existing setup.

Cheers   :think1
Title: Re: LED Globes in en existing indicator
Post by: Brock on June 27, 2017, 08:20:20 PM
There are LED bulbs are available, however the flash rate will go nutsn unless you find a suitable lectronic flasher can replacement.

There are ways to use a resistor to trick the can, but it wastes power.
Title: Re: LED Globes in en existing indicator
Post by: bloodbikes on June 27, 2017, 09:02:04 PM
Brock, can you advise on details on electronic flasher to use, does jaycar sell them or auto shop or eBay?

 :wht13
Title: Re: LED Globes in en existing indicator
Post by: Gadget on June 27, 2017, 09:42:57 PM
From memory, Supercheap and Auto Pro sell electronic flasher cans.

Sent from my SM-G930F using Tapatalk

Title: Re: LED Globes in en existing indicator
Post by: Brock on June 27, 2017, 10:33:10 PM
Super Cheap, or Repco , automasters. Take the original with you, to get the right match.

I havent done it, so dont have a part number.
Title: Re: LED Globes in en existing indicator
Post by: Ace on June 28, 2017, 07:24:10 AM
Ok guys I have the answer for you...you can buy an electronic flasher "can" from ebay for less than $1.50. Here's a typical one http://www.ebay.com.au/itm/2-Pin-Speed-Adjustable-LED-Flasher-Relay-Motorcycle-Turn-Signal-Indicator-ID-/252797713035?epid=554269150&hash=item3adbeafa8b:g:WioAAOSwhkRWeWRX (http://www.ebay.com.au/itm/2-Pin-Speed-Adjustable-LED-Flasher-Relay-Motorcycle-Turn-Signal-Indicator-ID-/252797713035?epid=554269150&hash=item3adbeafa8b:g:WioAAOSwhkRWeWRX) but there are others around a similar price. I have replaced all my old  cans on my cxes...including those which don't have led indicators. These units will work on either type globes and are super reliable. You can even vary the flash rate!
 A couple of things to to consider however...your indicators will no longer make a tic tic noise and, if a globe goes in one indicator, the others will continue to work on happily and you may not be aware that you have a globe "out".

On my cxes I got sick of the old style flasher cans failing and my cx650 had led front indicators so I have solved it all in one hit.
I am  assuming the STs will use a similar style system...and I am about to do the same mod to my new 1100 soon!

Chris
PS here's a round style that I haven't seen before...http://www.ebay.com.au/itm/12V-2-Pin-Beeper-Motorcycle-Flasher-Relay-Turn-Signal-LED-Indicator-Blinker-Hot-/142162661356?hash=item21198e0fec:g:99kAAOSwcUBYEpwY (http://www.ebay.com.au/itm/12V-2-Pin-Beeper-Motorcycle-Flasher-Relay-Turn-Signal-LED-Indicator-Blinker-Hot-/142162661356?hash=item21198e0fec:g:99kAAOSwcUBYEpwY)
These would have fitted the space directly in the cxes...so I will buy a couple of more of these in any case....however I currently do not know what style or  number of pins the STs have....???