OzSTOC
Farkles, Gear & Accessories => Farkles and Gear General Section => Topic started by: Shiney on September 22, 2016, 02:38:16 AM
-
Recommended Tools For Maintenance Of Your ST
The idea of this topic is to discus the tools people use and/or recommend for doing maintenance on their ST's
With this information hopefully everyone will be able to acquire all the tools they’ll need :grin
This is my list :thumbsup
* Toledo Ratchet Crimping Pliers - 220mm ($39.99 from Supercheap)
These work great on the Red, Blue & Yellow coloured wire connectors
(http://media.supercheapauto.com.au/sca/images/thumbs/387572-thumb.jpg)
http://www.supercheapauto.com.au/Product/Toledo-Ratchet-Crimping-Pliers-220mm/387572?menuFrom=1021623 (http://www.supercheapauto.com.au/Product/Toledo-Ratchet-Crimping-Pliers-220mm/387572?menuFrom=1021623)
* SCA Automotive Cable Stripping Tool ($20.99 from Supercheap)
These are awesome for stripping wires when doing any electrical works/mods
(http://media.supercheapauto.com.au/sca/images/thumbs/343115-thumb.jpg)
http://www.supercheapauto.com.au/Product/SCA-Automotive-Cable-Stripping-Tool/343115?menuFrom=1021518 (http://www.supercheapauto.com.au/Product/SCA-Automotive-Cable-Stripping-Tool/343115?menuFrom=1021518)
* Supatool 5 Piece Metric Ratchet Ring Spanner Set ($26.94 from Bunnings)
With these, you only have to place it on the bolt/nut once then ratchet it on or off
(https://2ecffd01e1ab3e9383f0-07db7b9624bbdf022e3b5395236d5cf8.ssl.cf4.rackcdn.com/Product-190x190/431a04a6-cfd4-4470-800a-837454a3f75e.jpg)
https://www.bunnings.com.au/supatool-5-piece-metric-ratchet-ring-spanner-set_p6110043 (https://www.bunnings.com.au/supatool-5-piece-metric-ratchet-ring-spanner-set_p6110043)
* Work Zone Hex/Allen Key Wrench Set ($5.99 from Aldi when on sale)
These have long handles and are very strong making them great for undoing difficult bolts
(http://offers.kd2.org/pics/7b/d6/7bd6b2194886f229356dc3141f36125a76ce09a0.jpg)
If not available, I'd recommend:
* ToolPro Hex Key Set - 8 Piece, Metric ($22.49 from Supercheap)
Just as good as the ones from Aldi but these all have nice handles attached to each one
(http://media.supercheapauto.com.au/sca/images/thumbs/215130-thumb.jpg)
http://www.supercheapauto.com.au/Product/ToolPro-Hex-Key-Set-8-Piece-Metric/215130 (http://www.supercheapauto.com.au/Product/ToolPro-Hex-Key-Set-8-Piece-Metric/215130)
* Toledo Torque Wrench 3/8 Inch Square Drive - 301098 ($69.99 from Supercheap)
(This wrench can be set from 7-108 Nm of torque which covers most torque settings on the ST)
(http://media.supercheapauto.com.au/sca/images/thumbs/SPO80149-thumb.jpg)
http://www.supercheapauto.com.au/Product/Toledo-Torque-Wrench-3-8-Inch-Square-Drive-301098/SPO80149 (http://www.supercheapauto.com.au/Product/Toledo-Torque-Wrench-3-8-Inch-Square-Drive-301098/SPO80149)
* SCA Hex Bit Socket Set - 3/8" Drive, Metric, 7 Piece ($19.99 from Supercheap)
These allow you to torque up hex bolts with the 3/8" drive Torque Wrench
(http://media.supercheapauto.com.au/sca/images/thumbs/326049-thumb.jpg)
http://www.supercheapauto.com.au/Product/SCA-Hex-Bit-Socket-Set-3-8-Drive-Metric-7-Piece/326049 (http://www.supercheapauto.com.au/Product/SCA-Hex-Bit-Socket-Set-3-8-Drive-Metric-7-Piece/326049)
* ToolPro Socket Rail Set - 3/8" Drive, Metric, 10 Piece ($24.99 from Supercheap)
A nice set of 3/8" drive sockets
(http://media.supercheapauto.com.au/sca/images/thumbs/221218-thumb.jpg)
http://www.supercheapauto.com.au/Product/ToolPro-Socket-Rail-Set-3-8-Drive-Metric-10-Piece/221218 (http://www.supercheapauto.com.au/Product/ToolPro-Socket-Rail-Set-3-8-Drive-Metric-10-Piece/221218)
* ToolPro Plier Set - 4 Piece ($29.99 from Supercheap)
A nice set of pliers
(http://media.supercheapauto.com.au/sca/images/thumbs/341857-thumb.jpg)
http://www.supercheapauto.com.au/Product/ToolPro-Plier-Set-4-Piece/341857 (http://www.supercheapauto.com.au/Product/ToolPro-Plier-Set-4-Piece/341857)
Gadget put me on to these 2 AWESOME screwdrivers :-++
The Dual Drive gives a ratchet action to the screwdrivers & also gives the ability for them to turn in one direction when turning the handle left and right (They can be set to either direction)
* ToolPro Dual Drive Screwdriver Set - Precision, 11 Piece ($2.00 from Supercheap)
Awesome for use on small screws
(http://media.supercheapauto.com.au/sca/images/thumbs/342012-thumb.jpg)
http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-Precision-11-Piece/342012 (http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-Precision-11-Piece/342012)
* ToolPro Dual Drive Screwdriver Set - 29 Piece ($15.00 from Supercheap)
Awesome for use on medium to large screws
(http://media.supercheapauto.com.au/sca/images/thumbs/325788-thumb.jpg)
http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-29-Piece/325788 (http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-29-Piece/325788)
Anyway that's my list, please discuss and/or post your own recommendations below :thumb
(When recommending a tool, please include a pic (or a link to a pic on the net) and list where you brought the tool so others can check it out and/or buy one too :thumbs)
Cheers
Shiney
-
I would add this as well
https://www.bunnings.com.au/stanley-20-piece-screwdriver-set_p6061822 (https://www.bunnings.com.au/stanley-20-piece-screwdriver-set_p6061822)
(https://2ecffd01e1ab3e9383f0-07db7b9624bbdf022e3b5395236d5cf8.ssl.cf4.rackcdn.com/Product-1600x1600/a99868b5-0ef2-4f64-a2ee-c1eac767715b.jpg)
Tried to add a photo but no joy, Shiney maybe you can do that for me
-
Thanks for sharing WAG, that's a lot of screwdrivers for $29.98 (and the magnetised tips would make life easier) :thumbs
Thanks for fixing the pic Brock :-++
-
++ ++ ++
-
And they're Stanleys, which are a reputable brand. Most Bunnings stuff is OK, but not everything.
-
A quality multimeter is an essential piece of kit.
-
A quality multimeter is an essential piece of kit.
Very good point :-++ (and something I should have added)
This is the multimeter I use:
* Work Zone Digital Multimeter (from Aldi when on sale)
(http://offers.kd2.org/pics/b9/1e/b91ef735fbdebb2b149849fa42d5e0a70efe1586.jpg)
Do you have any recommendations Bikebear?
-
Mate my multimeter came from Dick Smith years ago and it's still going strong. We've bought a couple of meters from Jaycar for work and they are pretyy good however they are the pricier ones, but having looked at their mid ranged priced models they seem more than suitable to use for occasional testing. I personally wouldn't go the real cheapies but they have a couple of models in the $20 - $40 range that look ok.
If someone is feeling very extravagant they could buy a Fluke, very good meters but $$$$$$$$$..
-
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.
Cheers,
Gary
sent using another of Gadget's gadgets.
-
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.
Unless you are trained on mains equipment,, dont go near it with any tools. Mains Power bites hard, the first time could very well be the last time. Thats definitely a safety issue...
-
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.
Unless you are trained on mains equipment,, dont go near it with any tools. Mains Power bites hard, the first time could very well be the last time. Thats definitely a safety issue...
That too.
Cheers,
Gary
sent using another of Gadget's gadgets.
-
Here's a handy piece of kit for the garage and / or workshop.
https://www.pandoraabox.com/products/multi-directional-motorcycle-stands?fbclid=IwAR3mHrWGLBVECOpriP4Bm440tiC4jXyMB7o5eZ4zVXA1lJwdW_Eg14uD06s (https://www.pandoraabox.com/products/multi-directional-motorcycle-stands?fbclid=IwAR3mHrWGLBVECOpriP4Bm440tiC4jXyMB7o5eZ4zVXA1lJwdW_Eg14uD06s)
There's a video on the link too.
Currently not expensive. If someone else want to try it, and let us know the virdict, I (as many others) would be appreciated.
-
verdict and appreciative. You've been watching too much ABC. Please don't tell me you pronunciate ceremony as cere-moany.
-
verdict and appreciative. You've been watching too much ABC. Please don't tell me you pronunciate ceremony as cere-moany.
Damn! ... let us know the virdict verdict, I (as many others) would be appreciated appreciative.
Yeah Yes, in lockdown, to too much time too to watch filums films on Netflix, and take time too to respond these posts. But I'll take constructive advise advice from anyone.
-
As good as they'd be I don't reckon they are going to work with the ST for the simple reason they don't have a hollow rear axle or pickup spools or whatever they call them on the swing arm... :fp
Would have been great otherwise... :thumbsup
-
I figure it's time to resurrect this thread! :thumbs
I've built up quite a collection of Vessel JIS Screwdrivers since I've had my ST1300... >:() :popcorn
(https://i.ibb.co/Bw303QT/JIS.jpg)
They are my go-to screwdrivers these days, even for jobs that have nothing to do with my bike.
They just seem to fit screws better, even those that are your run of the mill Phillips head...
For those that aren't sure what a JIS Screwdriver is the video below is worth a watch.
You're Using The Wrong Screwdriver—JIS vs Phillips Screwdrivers Explained
https://youtu.be/VpqUhIZ-EJo
-
I know they grip the screws better than Phillips because the tip indents are parallel rather than tapered.
Where are you sourcing them from, Rusty?
-
Hi Bill, most, if not all have come from Amazon...
I usually just keep an eye on prices as they do drop every now and then...for example, the stubby screwdriver had been priced around $20 or more previously (which I refused to pay) but just recently it dropped to $9.10. :clap
By the way, it's still available at that price if anyone wants one: https://www.amazon.com.au/dp/B00N3M391O?psc=1&ref=ppx_yo2ov_dt_b_product_details (https://www.amazon.com.au/dp/B00N3M391O?psc=1&ref=ppx_yo2ov_dt_b_product_details)
Another good buy is this one: https://tinyurl.com/pt76nkwh (https://tinyurl.com/pt76nkwh) :thumbs
You'll need to be quick though as there's only one available...
-
I bought a set of ebay years ago. My local tool supply shop had never heard of JIS Screwdrivers??
Phillips heads are designed to cam out of the screw if you put too much tension on them, but JIS drivers and screw heads have a more positive grip and can withstand lots more twisting force.
-
Just to muddy the JIS/Phillips head screwdriver waters a little... :whistle
Do you really NEED a JIS Screwdriver??
https://youtu.be/G4yIOKvJ2RY
-
In an "emergency", you can grind about 1mm off the tip of a Phillips #2 driver to do the job. As per the video, that overcomes the issue of the tip bottoming out in the screw head before the "flanges" can fully engage.
-
Hi all, sorry to dredge up an oldish thread but here I am! In preparation for an upcoming transcontinental trip, I've been putting together an tool kit to carry with me as there was none on my girl. I've got everything I need to remove both front and rear wheels plus a couple of extra bits to cover most potential side of the road problems. Has anyone used the small threaded screws you can get to plug any small holes in tyres? I have a 4 wheel drive plug repair kit, but it's fairly bulky and I'm looking at either a small kit which includes CO2 canisters to pump up the tyre or these screws. The screws are found here; https://www.ebay.com.au/itm/375039517028?var=644121187729 (https://www.ebay.com.au/itm/375039517028?var=644121187729)
Is there anything else that people find is both light and easy to carry that I'm missing?
-
I wouldnt use the screws, they look to ridged, and would cause more damage further down the track. The CO2 cylinders are useless on a bike or car, it takes quite a few to inflate the tyre.
I use a stop n Go tyre repair kit like this, I have had one for years and it works very well..
There are small compressors that can be had though they dont seem to last long..
https://i.ebayimg.com/images/g/u3kAAOSwNCRizPax/s-l1600.jpg
-
Thanks, Brock. I had my doubts but after watching a YouTube video, the screws looked like they may be OK. I have a small 12 v compressor that's good for up to 50 psi, I just need to change the connector to alligator clamps not cig lighter. I agree it may not last too many times but once would be enough to get me out of trouble. I like the repair kit, I'll look into that on.