Honda ST1100 Section > Tyres...to suit your ST1100
Preventaflat
Piet:
I recently purchased from Shaun his rear rim & Metzeler tyre 160/70-17. My ST had had an Avon Storm2 that was destryed and emergency replaced with a Metzeler Z8 160/60-17. Good tyre but I preferred the original size. So needing a 160/60 for my CB400SF it was time to take the 160/60 off the ST and fit it to the CB400 and fit Shauns complete wheel to my ST.
Shauns tyre had a slow leak that started to be felt after a weeks riding and I am not sure why but the tyre I took off and fitted to the CB400 had a faster leak on the bead seal. Having both bikes with slow leaks was a right royal pain in the proverbial. So time to try a slime type product.
I purchased a 1 litre bottle of Preventaflat. http://preventaflat.com and inserted 250 mills in each tyre. Fixed both leaks instantly. Its the first time I have used this kind of product, it worked a treat.
Interestingly I have been using my pushbike pump to pump up the tyres. For the new Michelin Commander II I fitted after removeing the Metzeler Z8, I thought I would need to go to the servo in the car but decided to try the bike hand pump. A couple of heftly thumps with the rubber hammer on the tread as I rotated it round gave sufficient seal to pump it up with no issue at all. Spurred on, I tried the same with the Metzeler 160/60 on the CB400 and it worked just the same. So managed some exercise and got the job done on both tyres.
Biggles:
You must be a champion with the bike pump!! That's a huge volume of air needed to get it up to 290 kPa!
Williamson:
--- Quote from: Biggles on May 02, 2015, 11:01:56 PM ---You must be a champion with the bike pump!! That's a huge volume of air needed to get it up to 290 kPa!
--- End quote ---
Not sure what sort of bicycle pump Piet has, but with my Beto pump, I can easily get 120psi ~ 830kPa into my bicycle tyres. No doubt a bit more effort would be required for the ST's tyres.
Nigel:
I wonder where this threads going? :grin................................................................................ :wht11
Biggles:
--- Quote from: Nigel on May 03, 2015, 08:56:20 AM ---I wonder where this threads going? :grin................................................................................ :wht11
--- End quote ---
We've got the tyres sealed, now we've got to get the air into them. :p
Navigation
[0] Message Index
[#] Next page
Go to full version