Author Topic: Recommended Tools For Maintenance Of Your ST  (Read 5433 times)

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Recommended Tools For Maintenance Of Your ST
« on: September 22, 2016, 02:38:16 AM »
Recommended Tools For Maintenance Of Your ST


The idea of this topic is to discus the tools people use and/or recommend for doing maintenance on their ST's
With this information hopefully everyone will be able to acquire all the tools they’ll need :grin


This is my list :thumbsup


* Toledo Ratchet Crimping Pliers - 220mm ($39.99 from Supercheap)
These work great on the Red, Blue & Yellow coloured wire connectors


http://www.supercheapauto.com.au/Product/Toledo-Ratchet-Crimping-Pliers-220mm/387572?menuFrom=1021623


* SCA Automotive Cable Stripping Tool ($20.99 from Supercheap)
These are awesome for stripping wires when doing any electrical works/mods


http://www.supercheapauto.com.au/Product/SCA-Automotive-Cable-Stripping-Tool/343115?menuFrom=1021518


* Supatool 5 Piece Metric Ratchet Ring Spanner Set ($26.94 from Bunnings)
With these, you only have to place it on the bolt/nut once then ratchet it on or off


https://www.bunnings.com.au/supatool-5-piece-metric-ratchet-ring-spanner-set_p6110043


* Work Zone Hex/Allen Key Wrench Set ($5.99 from Aldi when on sale)
These have long handles and are very strong making them great for undoing difficult bolts



If not available, I'd recommend:

* ToolPro Hex Key Set - 8 Piece, Metric ($22.49 from Supercheap)
Just as good as the ones from Aldi but these all have nice handles attached to each one


http://www.supercheapauto.com.au/Product/ToolPro-Hex-Key-Set-8-Piece-Metric/215130


* Toledo Torque Wrench 3/8 Inch Square Drive - 301098 ($69.99 from Supercheap)
(This wrench can be set from 7-108 Nm of torque which covers most torque settings on the ST)


http://www.supercheapauto.com.au/Product/Toledo-Torque-Wrench-3-8-Inch-Square-Drive-301098/SPO80149


* SCA Hex Bit Socket Set - 3/8" Drive, Metric, 7 Piece ($19.99 from Supercheap)
These allow you to torque up hex bolts with the 3/8" drive Torque Wrench


http://www.supercheapauto.com.au/Product/SCA-Hex-Bit-Socket-Set-3-8-Drive-Metric-7-Piece/326049


* ToolPro Socket Rail Set - 3/8" Drive, Metric, 10 Piece ($24.99 from Supercheap)
A nice set of 3/8" drive sockets


http://www.supercheapauto.com.au/Product/ToolPro-Socket-Rail-Set-3-8-Drive-Metric-10-Piece/221218


* ToolPro Plier Set - 4 Piece ($29.99 from Supercheap)
A nice set of pliers


http://www.supercheapauto.com.au/Product/ToolPro-Plier-Set-4-Piece/341857


Gadget put me on to these 2 AWESOME screwdrivers :-++
The Dual Drive gives a ratchet action to the screwdrivers & also gives the ability for them to turn in one direction when turning the handle left and right (They can be set to either direction)


* ToolPro Dual Drive Screwdriver Set - Precision, 11 Piece ($2.00 from Supercheap) 
Awesome for use on small screws


http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-Precision-11-Piece/342012


* ToolPro Dual Drive Screwdriver Set - 29 Piece ($15.00 from Supercheap)
Awesome for use on medium to large screws


http://www.supercheapauto.com.au/Product/ToolPro-Dual-Drive-Screwdriver-Set-29-Piece/325788




Anyway that's my list, please discuss and/or post your own recommendations below :thumb
(When recommending a tool, please include a pic (or a link to a pic on the net) and list where you brought the tool so others can check it out and/or buy one too :thumbs)


Cheers
Shiney
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 
The following users thanked this post: ST2UP, Draco (Heartbreak Kid)

Offline West Aussie Glen

  • old fart
  • Supreme "2000" Club Member
  • *****
  • Posts: 3154
  • Thanked: 839 times
  • Willetton, Perth
Re: Recommended Tools For Maintenance Of Your ST
« Reply #1 on: September 22, 2016, 09:08:37 AM »
I would add this as well


https://www.bunnings.com.au/stanley-20-piece-screwdriver-set_p6061822



Tried to add a photo but no joy, Shiney maybe you can do that for me
« Last Edit: September 22, 2016, 09:53:07 AM by Brock »
Glen
Sold
1948 James 98cc 2 Speed, 1969 Suzuki A100-2
1970 Suzuki T250 Hustler, Honda CL100
Yamaha RD250C, 1985 Kawasaki GPZ250
BMW K75S, 78 Yamaha XS11
Yamaha Royal Star Tour Deluxe, 88 GL1500
99 SE GL1500
In the shed
85 Kawasaki LTD250
88 GL1500 Outfit
08 ST1300
2013 GL1800
2013 GL1800 Outfit
 
The following users thanked this post: Shiney

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Recommended Tools For Maintenance Of Your ST
« Reply #2 on: September 22, 2016, 10:38:24 AM »
Thanks for sharing WAG, that's a lot of screwdrivers for $29.98 (and the magnetised tips would make life easier) :thumbs

Thanks for fixing the pic Brock :-++
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline spanner

  • Blue is better .... apparently
  • NatRally 2018 - Mackay
  • Legendary "1000 Club" Member
  • *
  • Posts: 1356
  • Thanked: 181 times
  • legend in my own match box.
Re: Recommended Tools For Maintenance Of Your ST
« Reply #3 on: September 22, 2016, 12:59:45 PM »
 ++ ++ ++
F.R. #905

I.B.A. # 63008

I acknowledge the Bindal and Wulgurukaba traditional custodians of this Australian land that I work, live and play on, and pay my respect to their cultures, their ancestors and to the elders, past, present and all future generations.
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Recommended Tools For Maintenance Of Your ST
« Reply #4 on: September 22, 2016, 05:23:20 PM »
And they're Stanleys, which are a reputable brand.  Most Bunnings stuff is OK, but not everything.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 
The following users thanked this post: Shiney

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Recommended Tools For Maintenance Of Your ST
« Reply #5 on: September 22, 2016, 06:08:20 PM »
A quality multimeter is an essential piece of kit.
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 
The following users thanked this post: Shiney

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: Recommended Tools For Maintenance Of Your ST
« Reply #6 on: September 22, 2016, 07:45:06 PM »
A quality multimeter is an essential piece of kit.


Very good point :-++ (and something I should have added)


This is the multimeter I use:

* Work Zone Digital Multimeter (from Aldi when on sale)





Do you have any recommendations Bikebear?
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline Bikebear

  • Legendary Member
  • *****
  • Posts: 771
  • Thanked: 35 times
  • Livin' it up in FNQ..
Re: Recommended Tools For Maintenance Of Your ST
« Reply #7 on: September 22, 2016, 08:46:58 PM »
Mate my multimeter came from Dick Smith years ago and it's still going strong. We've bought a couple of meters from Jaycar for work and they are pretyy good however they are the pricier ones, but having looked at their mid ranged priced models they seem more than suitable to use for occasional testing. I personally wouldn't go the real cheapies but they have a couple of models in the $20 - $40 range that look ok.

If someone is feeling very extravagant they could buy a Fluke, very good meters but $$$$$$$$$..
Craig..
STOC #8215
UC #42145
SCA#2478

Gold '99 ST1100A (Golden Brown), Black '04 VT750, Red '15 1800 Valkyrie (Hildr), Black '08 DN01



"Golden Brown finer temptress, Never a frown with Golden Brown"
 
The following users thanked this post: Shiney

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5564
  • Thanked: 2098 times
  • Just Ridin'
Re: Recommended Tools For Maintenance Of Your ST
« Reply #8 on: September 22, 2016, 08:48:51 PM »
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.

Cheers,
Gary

sent using another of Gadget's gadgets.

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 
The following users thanked this post: Shiney

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Recommended Tools For Maintenance Of Your ST
« Reply #9 on: September 22, 2016, 09:34:24 PM »
Quote
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.

Unless you are trained on mains equipment,, dont go near it with any tools. Mains Power bites hard, the first time could very well be the last time. Thats definitely a safety issue...
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: Shiney

Offline Gadget

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5564
  • Thanked: 2098 times
  • Just Ridin'
Re: Recommended Tools For Maintenance Of Your ST
« Reply #10 on: September 22, 2016, 09:49:06 PM »
Quote
If it's not at least a CAT III rated multimeter, don't use it on 240 V mains. It's a safety issue.

Unless you are trained on mains equipment,, dont go near it with any tools. Mains Power bites hard, the first time could very well be the last time. Thats definitely a safety issue...
That too.


Cheers,
Gary

sent using another of Gadget's gadgets.

Cheers,
Gary
_________________________________________________________________________________________________________
Then  :blu13 Now :Spyder
Life's too short to be miserable, so enjoy it! :)
OzSTOC #257
FarRider #810
IBA #59140

Mob: 04 2448 3555
 

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: Recommended Tools For Maintenance Of Your ST
« Reply #11 on: July 27, 2021, 04:02:27 PM »
Here's a handy piece of kit for the garage and / or workshop.

https://www.pandoraabox.com/products/multi-directional-motorcycle-stands?fbclid=IwAR3mHrWGLBVECOpriP4Bm440tiC4jXyMB7o5eZ4zVXA1lJwdW_Eg14uD06s

There's a video on the link too.

Currently not expensive.  If someone else want to try it, and let us know the virdict, I (as many others) would be appreciated.
Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better
 

Online Langers

  • Legendary Member
  • *****
  • Posts: 740
  • Thanked: 448 times
  • 2008 ST 1300 (sold) 2018 V-Strom 1000
Re: Recommended Tools For Maintenance Of Your ST
« Reply #12 on: July 27, 2021, 08:23:59 PM »
verdict and appreciative. You've been watching too much ABC. Please don't tell me you pronunciate ceremony as cere-moany.
FarRider #726
Mobile: 0418 817 851
 
The following users thanked this post: Williamson

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: Recommended Tools For Maintenance Of Your ST
« Reply #13 on: July 27, 2021, 08:42:40 PM »
verdict and appreciative. You've been watching too much ABC. Please don't tell me you pronunciate ceremony as cere-moany.

Damn!  ... let us know the virdict verdict, I (as many others) would be appreciated appreciative.

Yeah Yes, in lockdown, to too much time too to watch filums films on Netflix, and take time too to respond these posts.  But I'll take constructive advise advice from anyone.











Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better
 
The following users thanked this post: Langers

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Recommended Tools For Maintenance Of Your ST
« Reply #14 on: July 27, 2021, 09:00:39 PM »
As good as they'd be I don't reckon they are going to work with the ST for the simple reason they don't have a hollow rear axle or pickup spools or whatever they call them on the swing arm...  :fp

Would have been great otherwise... :thumbsup


        2005 Honda ST1300A
 

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Recommended Tools For Maintenance Of Your ST
« Reply #15 on: May 11, 2023, 09:30:12 PM »
I figure it's time to resurrect this thread!  :thumbs

I've built up quite a collection of Vessel JIS Screwdrivers since I've had my ST1300...  >:() :popcorn



They are my go-to screwdrivers these days, even for jobs that have nothing to do with my bike.
They just seem to fit screws better, even those that are your run of the mill Phillips head...

For those that aren't sure what a JIS Screwdriver is the video below is worth a watch.

You're Using The Wrong Screwdriver—JIS vs Phillips Screwdrivers Explained

https://youtu.be/VpqUhIZ-EJo


        2005 Honda ST1300A
 
The following users thanked this post: Biggles, Wild Rose, Dragonstaff

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Recommended Tools For Maintenance Of Your ST
« Reply #16 on: May 12, 2023, 01:10:31 PM »
I know they grip the screws better than Phillips because the tip indents are parallel rather than tapered.
Where are you sourcing them from, Rusty?
« Last Edit: May 13, 2023, 06:36:59 PM by Biggles »
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Recommended Tools For Maintenance Of Your ST
« Reply #17 on: May 12, 2023, 03:28:35 PM »
Hi Bill, most, if not all have come from Amazon...

I usually just keep an eye on prices as they do drop every now and then...for example, the stubby screwdriver had been priced around $20 or more previously (which I refused to pay) but just recently it dropped to $9.10.  :clap

By the way, it's still available at that price if anyone wants one:  https://www.amazon.com.au/dp/B00N3M391O?psc=1&ref=ppx_yo2ov_dt_b_product_details

Another good buy is this one: https://tinyurl.com/pt76nkwh  :thumbs
You'll need to be quick though as there's only one available...
« Last Edit: May 12, 2023, 03:39:03 PM by ruSTynutz »


        2005 Honda ST1300A
 
The following users thanked this post: Dragonstaff

Offline StinkyPete

  • Defected to a BMW
  • NR2016 Group
  • UNBELIEVABLE "5000 Posts" Member
  • *
  • Posts: 6533
  • Thanked: 2946 times
  • Blackwood, SA
Re: Recommended Tools For Maintenance Of Your ST
« Reply #18 on: May 12, 2023, 03:39:00 PM »
I bought a set of ebay years ago.   My local tool supply shop had never heard of JIS Screwdrivers??

Phillips heads are designed to cam out of the screw if you put too much tension on them, but JIS drivers and screw heads have a more positive grip and can withstand lots more twisting force.
IBA #59146   OzLapper 2012 & 2019

Yamaha XS650  (The Black Wobbler)
Yamaha XJR1300 (Rocket Ship)
Honda ST1300 (Beautiful Bike)
BMW R1200RT (Technically Perfect)
 
The following users thanked this post: ruSTynutz

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: Recommended Tools For Maintenance Of Your ST
« Reply #19 on: May 15, 2023, 11:26:27 AM »
Just to muddy the JIS/Phillips head screwdriver waters a little...  :whistle

Do you really NEED a JIS Screwdriver??

https://youtu.be/G4yIOKvJ2RY


        2005 Honda ST1300A
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2474 times
  • Bridgeman Downs, Brisbane
Re: Recommended Tools For Maintenance Of Your ST
« Reply #20 on: May 15, 2023, 09:56:55 PM »
In an "emergency", you can grind about 1mm off the tip of a Phillips #2 driver to do the job.  As per the video, that overcomes the issue of the tip bottoming out in the screw head before the "flanges" can fully engage.
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 
The following users thanked this post: ruSTynutz

Offline bucket

  • Newbie
  • *
  • Posts: 16
  • Thanked: 10 times
  • ST Legend
Re: Recommended Tools For Maintenance Of Your ST
« Reply #21 on: March 18, 2024, 09:09:59 AM »
Hi all, sorry to dredge up an oldish thread but here I am! In preparation for an upcoming transcontinental trip, I've been putting together an tool kit to carry with me as there was none on my girl. I've got everything I need to remove both front and rear wheels plus a couple of extra bits to cover most potential side of the road problems. Has anyone used the small threaded screws you can get to plug any small holes in tyres? I have a 4 wheel drive plug repair kit, but it's fairly bulky and I'm looking at either a small kit which includes CO2 canisters to pump up the tyre or these screws. The screws are found here; https://www.ebay.com.au/itm/375039517028?var=644121187729
Is there anything else that people find is both light and easy to carry that I'm missing?
Common sense isn't really that common.........
1969 CB100
1975 CB400
1972 CB750K2
1976 CB750F2
1957 Sunbeam 250
1979 KZ650
2003 ZRX1200S
 

Offline Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: Recommended Tools For Maintenance Of Your ST
« Reply #22 on: March 18, 2024, 12:07:49 PM »
I wouldnt use the screws, they look to ridged, and would cause more damage further down the track. The CO2 cylinders are useless on a bike or car, it takes quite a few to inflate the tyre.

I use a stop n Go tyre repair kit  like this, I have had one for years and it works very well..

There are small compressors that can be had though they dont seem to last long..
https://i.ebayimg.com/images/g/u3kAAOSwNCRizPax/s-l1600.jpg
Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 
The following users thanked this post: Dragonstaff, bucket

Offline bucket

  • Newbie
  • *
  • Posts: 16
  • Thanked: 10 times
  • ST Legend
Re: Recommended Tools For Maintenance Of Your ST
« Reply #23 on: March 19, 2024, 09:50:12 AM »
Thanks, Brock. I had my doubts but after watching a YouTube video, the screws looked like they may be OK. I have a small 12 v compressor that's good for up to 50 psi, I just need to change the connector to alligator clamps not cig lighter. I agree it may not last too many times but once would be enough to get me out of trouble. I like the repair kit, I'll look into that on.
Common sense isn't really that common.........
1969 CB100
1975 CB400
1972 CB750K2
1976 CB750F2
1957 Sunbeam 250
1979 KZ650
2003 ZRX1200S