Author Topic: YSS456 shock install/review  (Read 646 times)

Offline DavidP

  • Sr. Member
  • ****
  • Posts: 306
  • Thanked: 221 times
  • ST13 fan, near Toowoomba, Qld
YSS456 shock install/review
« on: June 24, 2023, 08:22:00 PM »
Due to my old shock being unrebuildable I needed to source a replacement.  With a 15 year old ST with 110000km I decided it wasn't worth spending a large pile of $$$ on a replacement and after much hand-ringing I decided to try a YSS shock.  It was $720 delivered  from Melbourne via express post, and comes with a 2 year warranty.

External build quality seems to be really good and it is 2kg lighter than stock, but it doesn't have a remote preload adjuster (shocks with that seem to start @ $1700+). It has ride height(10mm at shock, about 25mm at wheel) preload, and rebound damping adjustments.

Installation was straight forward, just a pity that the ST hides it's shock as it is a good looking shock. It took longer removing the old shock than installing the new one.

The shock height is adjustable via the bottom mount, and seems to be set slightly longer than stock (5-10mm higher ride height), and you can remove the axle without unbolting the right hand muffler with the factory setting :thumbsup

With my lovely assistant's help we set the static sag, with only 1 turn required for me (90kg dressed)+ some gear in the panniers.  That means YSS set the spring for a 90kg rider from the factory.  Each turn on the adjuster (1mm) is good for an extra 18.3kg of weigbt over the rear axle(180n/mm spring), vs 17kg for the stock spring which is good as the ST seems to be slightly under sprung for my weight.

After an initial short ride I added 1 click on the rebound adjuster, and it felt sooooo much better than the old worn shock. The extra ride height didn't seem to make much difference to handling, maybe speeding the steering a fraction, but dead stable.
Took it for an 2 up run to a nearby RTE and the ST handled better and suspension seemed better than it ever had! (purchased with 13000km on the clock).

The main downside is preload adjustment needs the side panel to be removed, which would be a pain if you are constantly changing between solo and 2 up.

I'll update this post in the future (if I remember)
:slvr13 in style
2008 ST1300, Carbon fender extender, blinker/mirror mod, switchback indicators, diy wiring/jump start harness, heated grips, diy swing-arm/shock protector, insulated fairing pockets, diy led spots
 
The following users thanked this post: Shiney, Wild Rose, tding, CallMeSteve, ruSTynutz

Offline Wild Rose

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 6941
  • Thanked: 2024 times
  • Toowoomba, Qld
Re: YSS456 shock install/review
« Reply #1 on: June 24, 2023, 08:31:36 PM »
Very good David  :hatwave
Thanks for sharing  :thumbsup
Leo (Wild Rose)
Honda ST 1300
0417198510
:rd13       :blk13                            :Spyder
 2002                            New 29-04-13 


Ulysses #49154
FarRider #243
 

Online ruSTynutz

  • NR2024 Rally Team
  • Supreme "2000" Club Member
  • *
  • Posts: 4431
  • Thanked: 2791 times
    • "Destined to Drive" Driving School
Re: YSS456 shock install/review
« Reply #2 on: June 24, 2023, 09:31:21 PM »
What Leo said!  :thumbsup


        2005 Honda ST1300A
 

Online Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: YSS456 shock install/review
« Reply #3 on: July 01, 2023, 06:12:20 PM »
Awesome review mate, thanks for sharing :thumbsup
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)