Author Topic: Pic-a-Part (Read 41418 times)

ST2UP · « **on:** April 03, 2014, 06:14:21 PM »

Here is a new game for you to test and impart your ST knowledge. The idea of the game is a picture of a part from an ST will be posted and you need to:

- Name the Part
- Where it belongs
- What purpose it serves on the bike

If you correctly pick the ST part the right to post your own Pic-a-Part is yours to post......

Simple Rules:

-The original poster of the Pic-a-Part is the judge.
-Only when the part is correctly identified and confirmed by the Judge may you post your part.
-If the game becomes stagnant a hint may be give by the original poster at their discretion.
-The part must be from a standard ST1100/1300 and NOT a farkle.

Think how this game may help increase the working knowledge of those new to the ST.

Enjoy the game and the knowledge you gain

ST2UP · « **Reply #1 on:** April 03, 2014, 06:16:07 PM »

Here is the first ST part:

Wombat · « **Reply #2 on:** April 03, 2014, 06:29:14 PM »

sump plug washer

Marcus · « **Reply #3 on:** April 03, 2014, 06:41:54 PM »

It's quite clearly that 15mm dohicky that goes with that thing...

Marcus out!

ST2UP · « **Reply #4 on:** April 03, 2014, 06:47:50 PM »

Nice try Wombat.....BUT NO CIGAR !!!

HunterTodd · « **Reply #5 on:** April 03, 2014, 06:58:32 PM »

Washer from underneath the banjo bolt on the clutch or brake master cylinder.

Abe · « **Reply #6 on:** April 03, 2014, 07:19:43 PM »

Washer that fits the the banjo fitting for the fuel pump assembly. Both washers should be replaced when you install a new fuel filter. Haynes manual ch4-23.

Thats my quess.

ST2UP · « **Reply #7 on:** April 03, 2014, 07:43:42 PM »

Well who is a smart cookie then........

Congrats to Abe

The Picture is your..........

saaz · « **Reply #8 on:** April 03, 2014, 08:58:21 PM »

Sounds like inside knowledge to me...

Abe · « **Reply #9 on:** April 04, 2014, 05:54:57 AM »

Quote from: saaz on April 03, 2014, 08:58:21 PM

Sounds like inside knowledge to me...

Well I did order parts from the States for our 13's and it did include the fuel filter

Abe · « **Reply #10 on:** April 04, 2014, 06:21:23 AM »

Easy one, when was the last time they where inspected or replaced (mine was replaced at 95K)

Brock · « **Reply #11 on:** April 04, 2014, 08:30:48 AM »

Drive cush inserts for 1300??

Abe · « **Reply #12 on:** April 04, 2014, 08:52:13 AM »

Close, very close, but no cigar.

saaz · « **Reply #13 on:** April 04, 2014, 09:20:01 AM »

You did mean 1100 I am sure

Quote from: Brock on April 04, 2014, 08:30:48 AM

Drive cush inserts for 1300??

Brock · « **Reply #14 on:** April 04, 2014, 01:12:25 PM »

You could be right there Saaz, I must have made a typo

Abe · « **Reply #15 on:** April 04, 2014, 01:37:54 PM »

1100 dampeners is CORRECT.

Your turn Brock

HunterTodd · « **Reply #16 on:** April 04, 2014, 04:29:14 PM »

I think there i a fundamental problem with this game.

The more competitive types are going to dismantle their bikes in an attempt to capture pictures of ever more obscure parts from some where deep in the bowels of their bikes.

Could lead to a rash of tech support requests!!

Brock · « **Reply #17 on:** April 04, 2014, 04:56:02 PM »

You could be right HT,

However.

let see if this works. It shouldnt be too hard, but I may post a supporting picture later on.

Supporting Pic

Turtle · « **Reply #18 on:** April 04, 2014, 06:28:36 PM »

Brake calliper bolt a certain dealer did not make Brock happy

Turtle

Brock · « **Reply #19 on:** April 04, 2014, 06:51:46 PM »

Thats cheating Turtle, using inside information.....

But correct..

After a front tyre change, there was a scraping noise from the front end. The pic is what I found. Yes I did ring the place concerned and let them have it both barrels.

The front left caliper was flopping back and forth, the bolt about to jump ship. Fortunately no damage done.

Oh, by the way, Turtle, you are it....

Turtle · « **Reply #20 on:** April 04, 2014, 07:12:07 PM »

Ok this should be easy as people

Turtle

Gavo · « **Reply #21 on:** April 04, 2014, 07:22:31 PM »

Is that the radiator thermal fan switch thingy majigy for an 1100

Turtle · « **Reply #22 on:** April 04, 2014, 07:41:59 PM »

Yes 1100 thermo switch

Well done Gavo ps and it's dead don't work bin time

Turtle

Brock · « **Reply #23 on:** April 04, 2014, 07:53:47 PM »

Turtle,

You forgot to say "Tag your it Gavo"

ST2UP · « **Reply #24 on:** April 10, 2014, 08:23:27 PM »

Zevk will be along shortly with a good one.......standby ppl's

News: