Hyperpro rear shock for ST1100

[Michael]

 Custom built rear shock set up for 75kg rider 80kg passenger plus bags and top box loaded.
Strong as, only done 2 trips to Phillip Island and back, the long way, to Byron Bay.
Cost over $780, for sale $475 plus postage.

[Brock]

set up for 75kg rider 80kg passenger

Well thats me out, I'm 105Kg to start with...   

[Michael]

The spring compression ring is set at 30mm with another 45mm of thread showing so I'm sure you could set it to your liking.

[hobs]

Why are you selling it?

Cheers, Hobs

[Michael]

Bike a non goer.

[adam]

Hi Michael I'm interested in the  shock absorbers if you can email me please thanks.

[Michael]

G'day Adam, What would you like to know?

[adam]

Is it easy to fit on St1100 ABS 2000.
My number is  0405 082 003.

[RubenCan]

Adam, It is dead easy.
1. Place the bike on centre stand
2. Remove right pannier
3. You have one bolt at the top and one at the bottom
4. place a piece of wood on the floor behind the wheel to act as fulcrum and use a long bar to adjust the height of the wheel/swingarm so as to not stress the bolt threads as you screw/unscrew (the wheel and swing arm can get heavy if you're not used to it)
5. Take for a ride, without panniers and adjust height every few kilometers until you reach your desired comfort level.

I would not remove the wheel for this as you have enough space to work in.
And what about the satisfaction that you did it yourself?

[adam]

Thanks  Rubencan I missed step 4. when I was taking it out I'm still looking for a second hand one. New one from Honda  $780.

[RubenCan]

Adam, check out David Silver Spares from the UK for all st11 parts. I found that including postage, I paid less than half the oz cost.

[adam]

Adam, check out David Silver Spares from the UK for all st11 parts. I found that including postage, I paid less than half the oz cost.