OzSTOC
Honda ST1300 Section => Plastic, Fairings, Panniers and Top Box's 1300 => Topic started by: sac468 on November 24, 2014, 08:53:03 AM
-
Hi All,
can anyone explain the procedure for removing the top box, never hade to do it before. (some Pickie's would be nice) I need to remove an old bracket that is under my top box from an old comms system. :think1
-
Do you mean "lift the bottom handle under the latch"?
That's all it takes. Once lifted, the box will slide forward and free of the mounting plate.
-
I think he might be talking about removing the mounting plate the Top Box clips onto.
Once you have the Top box off. there are 6 Hex head bolts under oval shaped plastic caps.
To remove the plastic caps you use a small screwdriver in the slots marked with arrows and then you can access the Hex head bolts. There are plastic washers underneath the bolts and you have to remove them before you remove the plate.
(https://lh3.googleusercontent.com/-WF9_8mNVLoo/VHMZbuiV7cI/AAAAAAAABHI/n_tTHdYm8NY/s800/Top%2520Box%2520Plate%2520-%2520highlighted.jpg)
-
I think you should take it to a workshop . . .