OzSTOC

Farkles, Gear & Accessories => Comms and Audio => Topic started by: Simmo50 on August 12, 2018, 07:10:08 PM

Title: Starcom uhf lead needed please
Post by: Simmo50 on August 12, 2018, 07:10:08 PM
Does anyone have a spare starcom advance 1 uhf cb radio to starcom leadts for a uniden 5 watt radio.  :whit11-r,
Title: Re: Starcom uhf lead needed please
Post by: Biggles on August 12, 2018, 09:25:07 PM
I'll be home on Tuesday- I think I can help.  I still have my old Starcom, plus the Uniden lead.
AND the Starcom bluetooth module if anyone is interested in that.
In fact, if anyone would like a cheap working excess-to-my-requirements Starcomm with helmet units and curly cords, shoot me a PM.  For a modest fee, I think Dale in Swansea NSW would install it for you.  I bought it from him originally and had some use from it before going to the Sena to escape the curly cords.
Title: Re: Starcom uhf lead needed please
Post by: Simmo50 on August 12, 2018, 10:14:41 PM
does it have a single jack type fitting at one end .  i think thats what plugs into the back of my uhf
Title: Re: Starcom uhf lead needed please
Post by: Biggles on August 13, 2018, 04:07:32 PM
Yes- from memory round multi-pin.
Also, IIRC, it's screws onto the top.
Title: Re: Starcom uhf lead needed please
Post by: Simmo50 on August 13, 2018, 04:16:15 PM
should be round multi pin.  to a 3.5mm jack plug i believe
Title: Re: Starcom uhf lead needed please
Post by: Brock on August 25, 2018, 12:55:36 PM
There should be a round 6 pin plug I believe to go into the starcom, and suitable plug on the other end to connect to the UHF.

Which UHF do you have, hand held or dash type.

I dont know anything about the starcom, or the pinout for the Uniden radios..
Title: Re: Starcom uhf lead needed please
Post by: Simmo50 on August 25, 2018, 01:09:13 PM
 not handheld. uhf has only a jack plug at rear   
Title: Re: Starcom uhf lead needed please
Post by: Brock on August 25, 2018, 07:40:03 PM
Plug at the back is audio out/external speaker. This will be a 3.5mm mono plug, which will go to the audio in wires of the 6 pin plug. The other wires needed will go to the front of the radio to the mic plug. A separate plug is used fro tx control

http://stwiki.notonthe.net/bin/view/General/StarCom (http://stwiki.notonthe.net/bin/view/General/StarCom)
Title: Re: Starcom uhf lead needed please
Post by: Totgas on August 25, 2018, 09:40:17 PM
FYI - Dale is longer doing anything related to Starcom and has suggested contacting Soundrider in Queensland for any advice and support.