OzSTOC
Farkles, Gear & Accessories => Farkles and Gear General Section => Topic started by: alans1100 on August 08, 2018, 07:30:59 PM
-
Just ordered the mount to fit our Rider 450 to the 1300 - Cost $186 delivered.
I still need to get TomTom wiring kit and make do with the one cradle between both bikes.
https://buybits.glopal.com/en-AU/p-6410/genuine-migsel-honda-pan-european-gps-satnav-mounting-option-gps-r-paneuro-sku-5982.html?utm_campaign=pr_r&utm_source=buybits.com&utm_medium=wi_osf&utm_content=en_GB (https://buybits.glopal.com/en-AU/p-6410/genuine-migsel-honda-pan-european-gps-satnav-mounting-option-gps-r-paneuro-sku-5982.html?utm_campaign=pr_r&utm_source=buybits.com&utm_medium=wi_osf&utm_content=en_GB)
(https://farm1.staticflickr.com/862/43874066862_241ed3640d_b.jpg) (https://flic.kr/p/29R14wE)main_pan-a (https://flic.kr/p/29R14wE) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
-
I paid AUD243 for mine including freight direct from Migsel. I did get a second ball but even so ... Not Happy Jan. That’s a good price. I never considered I’d get a better price elsewhere for the same thing.
-
:thumbs. Looks good. I will have to sneak a closer look during an RTE
-
I did check the Migsel site and they had a world wide including shipping price of 131 Euros or about $206 and that's where we going to get it from until I saw another site and checked it out. It's about $22 cheaper all up and better in my pocket I think.
http://www.migsel.com/store/index.php?_a=viewProd&productId=49 (http://www.migsel.com/store/index.php?_a=viewProd&productId=49)
-
This arrived today so I'll get around to fitting in the near future as I need a couple of other items and they can all be fitted at the same time.
-
After making sure the wiring worked for the GPS and the DC socket worked over here http://ozstoc.com/index.php?topic=12998.msg1247943#msg1247943 (http://ozstoc.com/index.php?topic=12998.msg1247943#msg1247943) it was time to add the Migsel mount.
When I first looked at the parts for this and read up on the install it was at first thought going to be a difficult task and maybe it is if some of the related bike parts are in place but I found it quite easy.
First up was the inserts for the bolts which might be the cause of most of the angst with this install. I found them easy and with an interference fit so they stay in place.
(https://farm8.staticflickr.com/7923/31486998867_338dd17c72_b.jpg) (https://flic.kr/p/PYp6LP)20181223_133020 (https://flic.kr/p/PYp6LP) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr(https://farm8.staticflickr.com/7829/44609975690_8b3747f1fb_b.jpg) (https://flic.kr/p/2aY2MzU)20181223_133029 (https://flic.kr/p/2aY2MzU) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
After putting the black panel back in place (not yet secured) it's just a matter of holding the mount on top while you put the two bolts in and then tighten them up with an Allen key.
(https://farm5.staticflickr.com/4899/31486998677_816f4f32a5_b.jpg) (https://flic.kr/p/PYp6Hx)20181223_134039 (https://flic.kr/p/PYp6Hx) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
Installed view from the rear
(https://farm5.staticflickr.com/4887/31486999717_8d8b7b6bb8_b.jpg) (https://flic.kr/p/PYp72t)20181223_134050 (https://flic.kr/p/PYp72t) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
The mount comes with a 1 inch threaded ball mount but I ordered another for the phone mount when I ordered the second GPS power cradle though I may order another ball mount and use the centre spot for the GoPro cam. The centre hole as a plastic insert in it which I added after the photo was taken.
(https://farm8.staticflickr.com/7825/31486999387_a991b4026a_b.jpg) (https://flic.kr/p/PYp6VM)20181223_134725 (https://flic.kr/p/PYp6VM) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
TomTom Rider 450 power cradle mounted in place though will need some adjustment as required when the screen is mounted back in place.
(https://farm8.staticflickr.com/7883/31486999167_9973cdabca_b.jpg) (https://flic.kr/p/PYp6RZ)20181223_135007 (https://flic.kr/p/PYp6RZ) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
When I installed the wiring for the GPS I used an available hole space as I didn't want to drill a hole in any parts
(https://farm8.staticflickr.com/7827/31486998967_3e09eb3800_b.jpg) (https://flic.kr/p/PYp6Nx)20181223_135015 (https://flic.kr/p/PYp6Nx) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
-
Good work mate :thumbsup
-
All done and bike back together and ready to roll.
Just need to fine turn the TomTom view angle when I sit on the bike.
LH Ram mount fitting is for the phone mount which is still in use on the 1100.
(https://farm8.staticflickr.com/7818/45894706955_472cdb45c6_b.jpg) (https://flic.kr/p/2cVynqX)20190120_164024 (https://flic.kr/p/2cVynqX) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr
(https://farm5.staticflickr.com/4888/46757430762_cfb901b178_b.jpg) (https://flic.kr/p/2eeN4am)20190120_164045 (https://flic.kr/p/2eeN4am) by Alan (https://www.flickr.com/photos/152195423@N05/), on Flickr