Author Topic: GPS Mount fabricated for ST1300  (Read 6409 times)

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
GPS Mount fabricated for ST1300
« on: March 03, 2015, 08:33:31 PM »
I relocated my universal waterproof GPS mount today.
 
I originally mounted it with sturdy 3M double sided tape to my HeliBar cover.
It has never detached from that position over the past 3 years and I had a safety cord just in case, tethered to the cable stay

The problem with the centre location was it was a bit awkward getting the key in and out as well as a bit far for me to see fine detail on the screen using my TomTom XL, so...

I fabricated a piece of aluminium mounted under the 2 bolts that secure the front brake assembly and an additional bolt thru the outer bolt of the master cylinder cover.

Ideally it would be better to mount the GPS on the clutch side so as to be able to use it while on the go, but I didn't want to relocate my heated grip controller and iphone remote....

I realize other well made RAM mount holders are available as well as shelves for the ST1300 but they are clunky looking in my opinion
(btw, www.Jhonyappleseed.com.au has a great range of RAM mounts)
 
I will test ride on the weekend
« Last Edit: March 03, 2015, 10:33:23 PM by zevk »
Zev
 

Offline Biggles

  • NatRally 2018 - Mackay
  • "Top Dog" 10000 club
  • *
  • Posts: 14026
  • Thanked: 2473 times
  • Bridgeman Downs, Brisbane
Re: GPS Mount fabricated for ST1300
« Reply #1 on: March 03, 2015, 08:51:37 PM »
Cunning attachment to beat vibration on a long arm like that.     :wink1
For the modern man who lives in the city, riding a bike might be one of the only ways to escape the humdrum monotony. To take off and ride. To be both at one with nature and one with the bike. To feel masculine. Adam Piggott

OzSTOC #16  STOC #6135  FarR #509  IBA #54927
 

Offline Abe

  • Legendary "1000 Club" Member
  • *****
  • Posts: 1797
  • Thanked: 178 times
  • 4D Gang Member
Re: GPS Mount fabricated for ST1300
« Reply #2 on: March 04, 2015, 04:33:19 AM »
 :thumbs nice work there Zev  :thumbs
At my age " getting lucky" is remembering what I came in the room for ;)

:wht13      Cheers Dave
Member of the 4 D Gang
 

Offline Shiney

  • Dave
  • Global Moderator
  • UNBELIEVABLE "5000 Posts" Member
  • *****
  • Posts: 6707
  • Thanked: 2319 times
  • RTE Coordinator - Strathpine, QLD
Re: GPS Mount fabricated for ST1300
« Reply #3 on: March 04, 2015, 04:47:13 AM »
It looks like a great bit of work mate, nicely done :thumbsup
My Ride: 2023 ST1800   :thumb
OzSTOC #104   STOC# 8512   IBA # 59142
Find me in The Who's Who of OzSTOC!

I like shiney things :grin
One of the Dave, Dave, Dave and Duncan crew 8)
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #4 on: March 04, 2015, 06:22:48 AM »
Thanks! :thumb
Zev
 

Offline tj189

  • Supreme "2000" Club Member
  • *****
  • Posts: 2131
  • Thanked: 150 times
  • Brisbane
Re: GPS Mount fabricated for ST1300
« Reply #5 on: March 04, 2015, 12:32:47 PM »
nicely done, love the watch
IBA #38035
FarRider #189
Ulysses #42456
 

Offline STroppy

  • STroppy (Terry - the name on the TeeShirt)
  • RTE Coordinator
  • Legendary "1000 Club" Member
  • *
  • Posts: 1860
  • Thanked: 736 times
  • CountryMember! Mob 0412499625
Re: GPS Mount fabricated for ST1300
« Reply #6 on: March 04, 2015, 01:15:39 PM »
Undoubtedly the final version will be painted an appropriate shade of black?
Terry, Canberra 0412499625
Ulysses #22354, FarRider #761
Current bikes 2013 Triumph Trophy SE, 2008 ST1300
Previous bikes1948 Triumph Tiger 500 Twin - sprung rear hub, 1963 BSA Bantam 175, Yamaha 75cc & DT250, Honda ST1100, 400N & CX500 sports, BMW K100RS & K100 LT, Harley Electra-glid
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #7 on: March 07, 2015, 09:17:52 AM »
Relocation as I did want left handed operation and the GPS was obstructing my R mirror view... 
a simple and sturdy option.
Zev
 

Offline Gavo

  • Double STowner no longer only an 04 ST 1300A
  • Legendary Member
  • *****
  • Posts: 986
  • Thanked: 51 times
  • Hoddys Well Toodyay WA
Re: GPS Mount fabricated for ST1300
« Reply #8 on: March 08, 2015, 12:45:28 AM »
I like the LED tape inside the mirrors

Are they hooked up to indicators , park lights or separate switch ?
Rob
Undercover HVAC Tech
All round nice guy so i believe
Also have now been told !

"We are all in it together"  Harry Tuttle.

STOC #8508
FR#601 
                  
:blu13
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #9 on: March 08, 2015, 07:54:31 AM »
Hi Gavo,
The LED strips are amber colored and connected to the turn signal, works very well as a reminder to cancel after turning and visible for others to see  :thumbs
Zev
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #10 on: March 29, 2015, 05:42:19 PM »
I have modified my home made Universal GPS mount as it was not exactly at the angle i wanted and had a bit of vibration.

Instead of a Vertical mounting position (using flat aluminium) for the ball I used 90 deg angle aluminium and achieved a Horizontal mount.

Now I have better range of vertical and lateral movement as well as solid stability with no vibration.

as always, pictures explain better than words
Zev
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #11 on: April 18, 2015, 06:23:35 PM »
Despite my best efforts i can't get the home made GPS mount to stop vibrating. It's only slight, but enough to make it difficult to see at some speeds
I purchased the RAM mount  from "Johnny Appleseed” 92 St Kilda road, St Kilda , they are the dealers for RAM mount and many other GPS accessories.

The hardware is very sturdy and well made, not flimsy plastic.
I have bolted it to the clutch reservoir and applied heavy duty, double sided, 20 kg rated 3M tape.
They do have a flat base mount that would fit completely over the clutch reservoir cover, but it was $45 and out of stock.

I have the universal GPS waterproof case mounted to the RAM ball and will trial it this way.
A custom made clip in / clip out (but not weatherproof) holder is available for my TOMTOM XL for $20 if needed.

I added the invoice with SKU numbers to make it easy for you all, as well as the website below!  :thumbs

https://jg-px.rtrk.com.au/RAM-Mounts/RAM-B-Size


Zev
 

Online Brock

  • Tardis Tech
  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 8713
  • Thanked: 1692 times
  • White is the fastest
Re: GPS Mount fabricated for ST1300
« Reply #12 on: April 18, 2015, 06:49:36 PM »
Of course, you could have just got one of these

Ram-B-346U

Brock
Asian Correspondent
2003 Honda ST1100PY



Ulysses #32829
STOC #8239
OzSToc # ??
Kinross WA
 

Offline zevk

  • Sr. Member
  • ****
  • Posts: 274
  • Thanked: 7 times
  • ST1300ABS
Re: GPS Mount fabricated for ST1300
« Reply #13 on: April 18, 2015, 06:57:19 PM »
"They do have a flat base mount that would fit completely over the clutch reservoir cover, but it was $45 and out of stock"


Note to Brock, as mentioned above...
Zev
 

Online Williamson

  • UNBELIEVABLE "5000 Posts" Member
  • ****
  • Posts: 5062
  • Thanked: 2200 times
  • ST Legend
Re: GPS Mount fabricated for ST1300
« Reply #14 on: April 18, 2015, 07:00:57 PM »
....... They do have a flat base mount that would fit completely over the clutch reservoir cover, but it was $45 and out of stock.....


I have some assorted ram mount bits and pieces (which I have accumulated in recent years through a trial and error process).  If you want to try before you buy, you (and anyone else in Melbourne, or even interstate but I don't think the postage charges would make it viable) is welcome to a short-term loan.

If you are interested, send me a PM, we can exchange 'phone no.s and make some loan arrangements.

....... They do have a flat base mount that would fit completely over the clutch reservoir cover, but it was $45 and out of stock.....



Of course, you could have just got one of them.

Ram-B-346U




Yeah, I have a spare one of these.

Cheers,  Michael
Cheers,  Williamson (AKA Michael)

Motorcycling, the best time you can have with your pants on.
eBiking, the second best time you can have with your pants on
Afterlife, up there for the climate, down there for the company.
If I'd known I was gunna live this long, I woulda looked after myself better