OzSTOC

Honda ST1100 Section => Oils, Oil Filters & Servicing ST1100 => Topic started by: Rooster on May 06, 2013, 06:30:58 PM

Title: Using oil
Post by: Rooster on May 06, 2013, 06:30:58 PM
Help please.

My 1100 oil was sitting about 1/2 way between the full and minimum in the oil looking glass. I went for a ride on the weekend about 500ks when I go back the oil was down between 1/2 & 1/4.  This is the first that I have noticed he oil moving off full. I did a change about 4000k's ago.

Is this normal or should be keeping an eye out for something.

Thanks I appreciate your comments.
Title: Re: Using oil
Post by: Brock on May 06, 2013, 07:00:27 PM
Nothing to worry about, the oil was probably in the top of the engine. Check again after the bike has sat for a while.
Title: Re: Using oil
Post by: Rooster on May 06, 2013, 07:42:32 PM
Thanks Brock. It's been sitting for 24 hours now and down about 5 mm on the glass window from where I started on Saturday.
Title: Re: Using oil
Post by: alans1100 on May 06, 2013, 08:41:26 PM
As long as the oil level is maintained between the upper and lower levels marked on the metal ring around the sight window with the bike on centre stand and then it should be okay.

(https://farm5.staticflickr.com/4451/23958663468_cc719a7732.jpg) (https://flic.kr/p/Cv9pWC)



Title: Re: Using oil
Post by: Abe on May 07, 2013, 07:44:06 AM
Hi Bruce, good to hear you are out and about riding, not stuck working.

What color is your spark plugs and exhaust??

PM if you want me to come and have a look, while she's cold.

Cheers
Dave
Title: Re: Using oil
Post by: saaz on May 07, 2013, 01:07:54 PM
The oil level in the sight glass is sensitive to the position of the bike.  I always check mine on the centre stand in the same spot for consistency, and find there is no variation between leaving the bike for 10 minutes or so after riding, and standing overnight. If I check it in the garage instead, the level reads slightly differently as the level of the floor is slightly different.
Title: Re: Using oil
Post by: Yorkie on May 07, 2013, 08:54:28 PM
I have had to replace the O'ring on the oil sight glass, the old one leaked and was hard, only leaked when on the centre stand and presumably while running.


Interesting, the service manager at the Honda Shop had never sold one previously, even though they are common to most Honda's.