OzSTOC
General Category => General Discussion => Topic started by: ST2UP on September 15, 2016, 08:51:44 AM
-
Morning All,
We are now considering the next production run of the OzSTOC Club Motorcycle Jacket.
The Jacket will be as close to the same as possible as the previous design (except for the sizing debarcle :H)
The overall opinion from all the feedback we have collated has the garment as a quality product at a very fair price.
The negative feedback that I can supply you is:
- A couple of members found the collar rubbed and modified.
- A couple found the waterproofing of the rain liner wasn't perfect
- One Jacket from the first round was found to have faulty stitching in the winter liner
- Jacket a little to hot for the tropics
- Jacket a little to cold for southern winters
- A little short in the arms for the Gorillas :p
This is the feedback we have been provided from the 110+ Jackets we have in use in the club.
Are they a perfect Jacket for every members build, riding style and climate....No way ;-*
But for a production run of jackets to attempt to accomodate the broader OzSTOC community we achieved a really good outcome.
(http://i1355.photobucket.com/albums/q717/ST2UP/8a63863b3dba769fd79cd1ccda4eff1e_zpsf888cf83.jpg)
What I now need is an Expression of Interest (EOI) from members who would be intersted in purchasing a Jacket from the next round so as that I may start the very detailed process of investigating a new supplier for this garment. The previous supplier no longer is in this line of business, so we will be starting from scratch. Which we are more than happy to do "IF" the nessessary interest exists.
Post below if you are interested please :popcorn
:beer
-
Draco
via DRACO 😎
-
I would be very interested if you had one made in a female cut.
-
I'd be interested if the basic sizing metrics (arm, chest, waist) were reflected reasonably accurately in the number of XLs; in my case, lots.
-
I would be very interested if you had one made in a female cut.
Thanks Wendy, I doubt this will be an option purely because of quantities :think1
However never say never....if we get the numbers in the interest to move forward from here I will definately put the ladies foot in the door with prospective suppliers and give the group feedback ;-*
-
I also found the collar rubbeed my neck at the front, and have modified it to prevent it from happening. Other than that, it's a great winter jacket.
-
I'd be interested.
paul
-
I have an interest for maybe two jackets.
My feed back which I did not provide earlier is that the small toothed zippers tend to grab the lining underneath and jam. maybe some sort of anti jamming zipper pull could be incorporated.
I love my jacket but it is a little too warm in the full summer months in North Qld.
-
I would put my hand up, i can never have to much ozstoc stuff 😄
-
I also found the collar rubbeed my neck at the front, and have modified it to prevent it from happening. Other than that, it's a great winter jacket.
I did the same, but love the jacket ++
-
This is the obvious question and I know this is early but what is the likely price range you are going for. Is it possible to get jackets without the OZSTOC symbol for friends and I trust members who have version 1 would avail themselves at RTEs for test fitting.
Cheers to all. :grin
:wht11
-
Not for me as I toss up the idea of parting with my Shiney ST :think1
-
Not for me as I toss up the idea of parting with my Shiney ST :think1
:eek Are you kidding ????? You are a slow learner my friend. ST. Wing. ST. Plenty have gone away but most have come back. :grin
-
Not for me as I toss up the idea of parting with my Shiney ST :think1
Shock horror.
sent using Tapatalk
-
This is the obvious question and I know this is early but what is the likely price range you are going for. Is it possible to get jackets without the OZSTOC symbol for friends and I trust members who have version 1 would avail themselves at RTEs for test fitting.
Cheers to all. :grin
:wht11
We did a few in the last roll out not embroidered, no probs there :like
But I'm happy enough if they want to plug the club for us with an embroidered jacket :Stirpot
-
As for the jacket? Not for me at this stage. I even find my highly meshed DriRider a tad too warm in summer here in Qld. I do like the look of them however. Easy to pick an OZstocer from a distance. Passed someone wearing one on a white 1300 on the weekend. Had lunch out at Wivenhoe Dam with a couple of non-ST riding friends.
-
Funny topic Mesh jackets and heat :p
It's the old Ford Vs. Holden debate :nahnah
Cheers
-
Funny topic Mesh jackets and heat :p
It's the old Ford Vs. Holden debate :nahnah
Cheers
Yep. Even commercially you see lots about 'warm' motorcycle gear but I've not seen anyone specialise in 'cool' safety gear. I do suffer with life long eczema so am always wanting to stay as cool as I can.
-
Yes, I'm interested - just don't tell the wife - I have 3 leather jackets, a Dri-rider Nordic Airflow and a Belstaff (impressive eh? - $15 at Salvos). I'm sure there is group therapy for my obsession.
-
Happy to be in on the updated version
-
Luv one
-
Put me in for another one....Grumpy bought my other one as I thought I was done with riding....
But I have decided I still want a Club Jacket
Tipsy
Still have a helmet and Sidi boots etc...lol
-
I'd be interested if the basic sizing metrics (arm, chest, waist) were reflected reasonably accurately in the number of XLs; in my case, lots.
As Lionel says . .
-
About a dozen people interested so far.....anymore ??
Naturally this will be a bulk purchase and special order so numbers is where it will count, at the moment we won't come close to a worthy deal for you all. So register your interest below if you haven't already :think1
:popcorn
-
Definitely in🤓. Please cancel previous order :grin
-
Interested if not too late. 2 required (wife & me) on this side of the ditch (NZ)
Murray
-
As above my order stands.
-
:blu13 Draco would love his FirST OzSToc jacket, sooooo when will it be??? :grin :grin :grin :blu13left
-
We are only looking at approximatley 15 members interested in the jacket at this stage......unfortunately these numbers are simply not in the arena of working a deal with a manufacturer at this stage.
The thread will stay active and keep the interest coming please, if we can double these numbers we may have a far better chance of securing deal on a suitable garment with all the feedback from the previous jacket.
Don't forget if you are of a smaller build we may have a OzSTOC Jacket in the shop that may fit you.
:beer
-
Hi all I'll be very interested in one.
Cheers Andrew
-
I am also interested but still wary after sizing problems.