OzSTOC
Honda ST1300 Section => Ask A Tech about your Honda ST1300 => Topic started by: gturalla1 on November 14, 2016, 07:25:56 PM
-
Maybe someone can help. Earlier this year, I bought an immaculate 2003 St1300.
It came with only 1 key, so following instructions from another forum, I made a reprogramming cable, and tried to reprogram a new key.
The HISS light did all the things it was supposed to do, according to the instructions, and I followed them exactly. According to the light flashes, the new key was reprogramed.
Problem is, it appears to have wiped the information from my key, because no key now works.
I was under the impression that the new key would be programed to the key in the ignition when starting the process.
Was there a master key that came with the bike, that a new one could be only programed from? I assumed the key I got was a master key.
Is there anybody in Australia that can reprogram ecu to the key I have, or is there a workaround.
I believe there is a pink wire from the key ring gear, that feeds a certain voltage to the ecu, as determined by the chip, which in turn, turns on the spark and fuel pump, is this true.
-
Could this thread help out??? http://ozstoc.com/index.php?topic=8883.msg103740#msg103740 (http://ozstoc.com/index.php?topic=8883.msg103740#msg103740) or maybe this info http://ozstoc.com/index.php?topic=10999.msg1202949#msg1202949 (http://ozstoc.com/index.php?topic=10999.msg1202949#msg1202949)
-
It appears that the key still works with the HISS, as the light goes out after a few seconds when turned on, but the bike still will not start, maybe something else has gone wrong.
-
kill switch?
-
All fixed, did think I was going to be up for new ECM plus keys etc.
However it was a simple fix, although it took a while to find it.
Apparently, the fuel tank prop rod moved out of its clip, and was reinserted, which in turn partially disconected a two pin plug down near the ECM (it comes from the coil).
New key programed and working, and a little bit wiser.
-
Well done, and thanks for the info. I'm sure someone will have the same issue at some point and your info will be a huge help :thumbs
Sent from my SM-N9005 using Tapatalk