OzSTOC

General Category => General Discussion => Topic started by: Marcus on February 09, 2019, 04:16:42 PM

Title: 10 years I've had this bike, 10 bloody years
Post by: Marcus on February 09, 2019, 04:16:42 PM

And now is the first time I figured out I could do this. 10 years you guys have had to tell me this. 10 bloody years.
 https://imgur.com/gallery/zhjenlZ

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Bodø on February 09, 2019, 04:24:24 PM

I don't think I can do that on mine, but I've got right angle valves on mine now so it's no longer a problem.

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: CallMeSteve on February 09, 2019, 04:31:32 PM

I always wondered what those holes were for.

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Biggles on February 09, 2019, 04:35:23 PM

I thought that's where you put the transmission oil in...    :crazy

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Gadget on February 09, 2019, 04:35:46 PM

WOW:

Sent from my SM-G930F using Tapatalk

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: MickS on February 09, 2019, 04:36:05 PM

Ingenious I thought , Saw this just minutes after pumping up the tyres for tomorrows ride. Go back outside and look at my'96 11 and no holes to fit the air hose through.
Bugger, I'll just continue to bend the valve stem sideways till I bugger it and then I will get one on those right angle valve stem thingemeys.
MickS

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Wild Rose on February 09, 2019, 04:52:40 PM

Never thought of that but a great idea
But I've got right angle valve stems so don't need to do it

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Skip on February 09, 2019, 08:06:22 PM

Quote from: Marcus on February 09, 2019, 04:16:42 PM

And now is the first time I figured out I could do this. 10 years you guys have had to tell me this. 10 bloody years.
 https://imgur.com/gallery/zhjenlZ

 :rofl :rofl  Who would have thunk. And hey. Welcome back Marcus. Haven't seen you around these parts for ages. I've missed you.  :grin  I fitted right angle valve stems about 10 years ago.  Wot thuh

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Shiney on February 10, 2019, 07:22:49 AM

I had no idea, thanks for sharing mate :-++ :-++ :-++


(https://i.imgur.com/9qtwOPS.jpg)

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: StinkyPete on February 10, 2019, 07:48:40 AM

What on earth made you think of putting an air hose into your rear hub  .......  and what else have you tried that didn't work out??

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: Marcus on February 10, 2019, 09:47:22 AM

Saw another pic somewhere on the internet's

Title: Re: 10 years I've had this bike, 10 bloody years
Post by: RubenCan on February 23, 2019, 01:51:57 PM

The big question to Marcus is, "What can you do with the holes in the mufflers?"  :nahnah